VONROC TM502XX TV Wall Mount Instructions

VONROC TM502XX TV Wall Mount

SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional safety warnings, and the instructions. Failure to follow the safety warnings and the instructions may result in electric shock, fire and/or serious injury. Save the safety warnings and the instructions for future reference.
The following symbols are used in the user manual or on the product:

• Read the user manual.
• Denotes risk of personal injury, loss of life or damage to the tool in case of non-observance of the instructions in this manual.
• Not intended for use by children.

SAFETY WARNINGS

Please read these instructions carefully and thoroughly before using this product and keep them for future reference. It is important that you understand how to use this product correctly, so please take the time to familiarize yourself with the requirements as outlined in these instructions.

• If you are in any doubt about using this product, it is strongly recommended to employ the servi-ces of a suitably qualified expert.
• Please consult the manual for your TV and ensure that the weight and size of the TV is within the limits specified for this product
• Note that not all of the supplied mounting accessories provided may be required for the installation of your specific TV.
• The mounting accessories provided are exclusively intended for installation onto strong supporting structures such as solid brick, solid concrete or solid wood columns.

PRODUCT INFORMATION

DESCRIPTION

1. Wallplate
2.  TV support arm
3.  Unlocking cord
4. Spirit level
5. Hardware kit

INSTALLATION

Ensure that your TV is compatible with this wall mount before proceeding the installation. Ensure that the supporting wall is capable of sustaining the combined weight of this wall mount and the TV. Attach Wall Plate to WallChoose option A or B depending on your wall construction.

Option A: Installing in drywall with timber supports (Figure D)

If you are installing this TV wall mount using this method, you must spread the wall plate across 2 wall studs. Do not attach the wall plate to a single wall stud in the center of the wall plate.

1.  Locate the center of two adjacent timber studs using a stud finder. You must use the center of the stud to avoid cracking or splitting the timber during installation.
2.  Mark a minimum of four mounting holes over the stud centers using the wall plate as a guide. Position two holes at either end of the wall plate (1). Use the provided spirit level (4) to ensure the wall plate (1) is level.
3.  Pre-drill the holes to a minimum depth of 55mm using a 4.5mm drill bit. If installing in hardwood, slightly larger diameter and deeper hole may be required.
4. Place the washers (W-C) onto the lag bolts (W-A). Attach the wall plate (1) to the wall using the lag bolts (W-A).

Option B: Installing in masonry (Figure E)

Ensure there is a minimum of 35mm of actual concrete/brick thickness in the location of each hole. Drill into solid concrete/bricks only. Do not drill into mortar joints.

1.  Mark a minimum of four mounting holes using the wall plate (1) as a guide. Position two holes at either end of the wall plate (1). Use the provided spirit level (4) to ensure the wall plate (1) is level.
2.  Drill the holes to a minimum depth of 60mm using a 10mm masonry drill bit. Clean out the holes after drilling.
3. Fully insert a concrete anchor (W-B) into each hole. Tap the anchor in using a hammer if required.
4.  Place the washers (W-C) onto the lag bolts (W-A). Attach the wall plate (1) to the wall using the lag bolts (W-A).

Attach Mounting Arms to TV (Figure F)

1.  Using Aa second person for assistance, lay your TV face down on something soft so as not to scratch the TV screen. Check the back of your TV to find the appropriate mounting pattern. Do not place the TV face down onto a table smaller than the TV itself, as doing so may crack or damage the TV screen.

2.  Sort through the provided bolts (M-A, M-B, M-C) until you find the correct size that fits into the mounting holes on the back oAf your TV. Test if the bolts can be tightened by hand for at least three full turns. Do not yet fully tighten the bolts. If you feel resistance while turning the bolt you must sAtop immediately and select a shorter bolt. Forcing in an oversized bolt may cause damage to your TV (see figure G)

3. Remove the bolts from the TV once you have selected the correct bolt size. Refer to your local hardware supplier for the correct bolts and washers if none of the supplied bolts will fit your TV.

4.  Gently place the mounting arms (2) on the back of the TV. If the back of your TV is curved or recessed you may need to use one or more of the supplied spacers (M-E or M-F). When using a
   spacer you may also need to use a longer bolt. Keep in mind that the bolt must always be able to turn at least three full turns (see figure G).

5.  Place the washers (M-D) onto the previously selected bolts. Attach the mounting arms (2) to the TV using the bolts. Do not over tighten the bolts, as doing so may cause damage to your

Attach TV to wall (Figure H)

1.  Using a second person for assistance, carefully lift the TV and hook the arms (2) over the top of the wall plate (1). Note that there are two height options on the mounting arms (2) to choose from.

2. Gently pull down on the unlocking cords (3) on the mounting arms (2) to open the locks into the ready position.

3.  Slowly lower the bottom of the TV until the bottom of the mounting arm (2) locks into the bottom of the wall plate (1). Release the unlock king cords (3) to secure the TV onto the wall
   plate (1).

4. To tilt the TV forwards, slightly loosen the bolts (6) on the side of the mounting arms (2). Adjust the TV to your preferred position and secure in place by re-tightening the bolts (6).

5. To remove the TV from the wall plate, gently pull the unlocking cords (3) to release the mounting arms (2). Using a second person for assistance,pull the bottom of the TV slightly forwards and then lift the TV up from the wall plate (1).

WARRANTY

VONROC products are developed to the highest quality standards and are guaranteed free of defects in both materials and workmanship for the period lawfully stipulated starting from the date of
original purchase. Should the product develop any failure during this period due to defective material and/or workmanship then contact VONROC directly. The following circumstances are excluded from this guarantee:

•  Repairs and or alterations have been made or attempted to the machine by unauthorized service centers;
•  Normal wear and tear;
•  The tool has been abused, misused or improperly maintained;
• Non-original spare parts have been used. This constitutes the sole warranty made by the company either expressed or implied. There are no other warranties expressed or implied that extend
  beyond the face hereof, herein, including the implied warranties of merchantability and fitness for a particular purpose. In no event shall VONROC be liable for any incidental or consequential damages. The dealer’s remedies shall be limited to the repair or replacement of nonconforming units or parts. The product and the user manual are subject to change. Specifications can be changed without further notice.

References

• VONROC Gereedschap & Tuin artikelen

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>