CENTEK CT-2523 Vacuum Cleaner Instruction Manual

: June 11, 2024
: CENTEK

CENTEK CT-2523 Vacuum Cleaner

DEAR CUSTOMER!

Prior to operating the appliance, please carefully read the present manual which contains important information regarding its proper and safe operation. Take care not to lose the present manual. The manufacturer will not be responsible for any damage resulting from improper use of the appliance or from non-observance of the instructions and provisions of the present manual, as well as from attempts by unskilled persons at repairing the appliance. Should You decide to transfer the appliance to another person, please pass the present manual over along with it.

PURPOSE OF THE DEVICE

For cleaning dust and dirt from hard and soft surfaces (hard floor, carpet, etc.).
The vacuum cleaner is a home appliance and is not designed for industrial applications.

SAFETY PRECAUTIONS

The appliance purchased by You complies with all official safety standards applicable to electric appliances in the Russian Federation.
The following requirements should be strictly observed in order to avoid situations hazardous for human life and health, as well as premature failures of the appliance:

Carefully read the present manual prior to operating the appliance. Retain the present manual, cash voucher and appliance packaging.
Ensure that the power supply grid voltage corresponds to the one indicated on the data plate of the appliance before operating it.
Connect the appliance only to power grid sockets equipped with earthing contacts, use only two-pole extension cables with 10A rating and an earthing conductor.
Always pull the plug from the power socket after use and prior to any cleaning and maintenance operations.
Pull the plug from the power socket before opening the dust collector lid.
Do not pull or carry the appliance by the power cable.
Do not use ethyl alcohol and other solvents for cleaning the appliance.
Do not use the appliance for collecting liquids.
Only the use of original spare parts is allowed. Do not use accessories which are not included in the scope of supply.
Do not turn the appliance on if it is damaged or malfunctioning.
Do not operate the appliance if its power cable or plug is damaged, if doesn’t run smoothly or has been dropped.
Do not attempt to repair the appliance yourselves.
Regularly check the appliance and its power cable for damage. Operating a damaged appliance is not allowed. Do not attempt to repair the appliance yourselves, apply to certified technicians. If the power cable is damaged it should be replaced by the Manufacturer, a service facility or other skilled personnel.
Do not submerge the appliance in water or any other liquids.
Ensure that the power cable does not touch sharp edges and hot surfaces.
The appliance should not be used by physically, sensory or mentally handicapped persons (including children) or by persons without sufficient experience or knowledge, unless such persons are under supervision, or have been instructed on the use of the appliance, by the persons responsible for their safety. Take precautions not to children play with the appliance.
Special instructions for transportation (shipment) and sale: none.

Do not place the unit near heat sources

|

Do not run the unit over its power cable

|

Do not use the unit to collect smoldering matches, cigarette stubs and smoldering ashes

---|---|---
| |

Do not use the unit on wet surfaces

|

Do not obstruct the air exhaust grille

|

Do not use the unit to collect needles, drawing pins, paper clips, etc

| |

APPLIANCE DESCRIPTION

Dust bin lock
Dust collector handle
Wheel
Plastic filter
Dust collector
Hose connector
Brush
Air flow regulator on the handle
Hose handle
Telescopic tube
Hose
ON/OFF button
Cord rewind button

SCOPE OF SUPPLY

Vacuum cleaner with dust container assembly – 1 pc.
Hose – 1 pc.
Telescopic tube – 1 pc.
Two-position brush – 1 pc.
Crevice nozzle – 1 pc.
Inlet filter made of non-woven fiber – 1 pc.
Output HEPA filter – 1 pc.
Hard sponge filter – 1 pc.
User manual – 1 pc.

OPERATION

VACUUM CLEANER ASSEMBLY. HOSE ATTACHMENT
To connect the flexible hose, press the button on the coupling and insert the hose into the intake opening on the vacuum cleaner.

INSTALLATION OF TELESCOPIC TUBE AND ATTACHMENTS (BRUSHES)

Attach the tube to the handle

|

Adjust tube length

|

Attach the desired attachment to the tube

---|---|---
| |

OPERATION START

Prior to operation start pull out the power cable to the desired length and insert the plug into the power socket. do not pull out the cable beyond the red mark. To retract the cable press the wind up while holding the cable with your hand for safety.
Turn the vacuum cleaner on and off by pressing the on/off button.

USING THE ATTACHMENTS

TWO-POSITION BRUSH FOR FLOOR AND CARPETS
Pos. 1: brushes extended – for solid floors.
Pos. 2: brushes retracted – for carpet cleaning.

SLOT BRUSH

For cleaning heating radiators, corners, tight spaces, drawers, etc

MAINTENANCE

Your vacuum cleaner is equipped with 2 types of filters:

Inlet filter made of non-woven fiber.
Output HEPA filter.
Each of these filters requires maintenance and regular replacement.

**CLEANING OF NON-WOVEN AND HEPA FILTERS The filters should be cleaned

after each**

use of the vacuum cleaner. Shake the filters to remove dust. In addition, approximately once a month with an average intensity of use, they must be blown through with a powerful jet of air. Do not wet the HEPA=filter – this can lead to failure of the electric motor! If you use your vacuum cleaner moderately, replace the non-woven and HEPA filters every 6 months.

ATTENTION!

Replacement filter sets can be purchased separately. We strongly recommend observing these maintenance requirements, as this will allow retaining the highest suction capacity and proper operation of your CENTEK vacuum cleaner for a long time. This is also an obligatory condition for guarantee maintenance.

DUST COLLECTOR CLEANING

Press the dust collector lock button and remove it.
Open the bottom cover of the dust collector, remove the plastic filter from the dust collector.
Remove dust and debris from the dust collector.
Wipe the housing and holes in the walls of the plastic filter with a cloth cloth.
Install the plastic filter in the dust collector.
Install the dust collector back on the body of the vacuum cleaner.

ATTENTION!

Do not wash the filters in a washing machine and do not dry them with a hair dryer or other heating devices.
Do not operate the vacuum cleaner without filters installed, as this may damage the motor.

SPECIFICATION

Nominal power rating: 2000 W
Max power rating: 2400 W
Suction capacity: 420 W
Nominal rated voltage: 220-240 V ~50/60 Hz

DISPOSAL

Upon expiry of its service life the appliance can be disposed of separately from ordinary domestic waste. You can turn it over to a specialized electric and electronic appliance disposal and recycling centre.

CERTIFICATION DATA, GUARANTEE

The service life of this item is 5 years since the date of sale to the end user, provided the item will be used in strict accordance with the present manual and the applicable technical standards. Upon expiry of the service life please contact the nearest authorized service centre for suggestions as to further operation of the appliance.
The manufacturing date of the appliance is integrated into the serial number (digits 2 and 3 – year, digits 4 and 5 – month of manufacture). If any questions related to appliance maintenance should arise, or if the appliance has malfunctions, apply to the CENTEK TM Authorized Service Center. The address of the service center can be found on the website https://centek.ru/servis. Service support contacts: Phone: +7 (988) 24-00-178, VK: vk.com/centek_krd. General Service Center: OOO «Larina-Servis», Krasnodar, Phone: +7 (861) 991-05-42.
The product is provided with the Certificate of Conformity No
ЕАЭС RU С-CN.ВЕ02.В.02216/20 of 28.04.2020.

MANUFACTURER AND IMPORTER INFORMATION

I mported to EAEU by: I ndividualniy Predprinimatel Asrumyan Karo Shurikovich.
Address: Russia, 350912 Krasnodar, ul. Atamana Lysenko, 23, pgt. Pashkovskiy. Phone: +7 (861) 2 600-900.

DEAR VALUED CONSUMER!

The guarantee period for all appliances amounts to 12 months since the date of sale to the end consumer. With this Warranty Card the Manufacturer confirms the proper condition of the appliance and undertakes to repair, free of charge, all defects caused by the Manufacturer’s default

GUARANTEE MAINTENANCE TERMS

The guaranteeshall bevalid if thefollowing documentation conditions areobserved:
– The original Warranty Card shall be filled out correctly and clearly, indicating the of appliance model, serial number and sale date, the stamp of the seller company andsignatureof its representativeshall be available, as well as thestamps on each coupon and the buyer’s signature in the Warranty Card.
The Manufacturer reserves theright to reject guarantee maintenanceif the buyer fails to provide the abovementioned documents or if the information contained therein is incomplete, illegible or ambiguous.
The guarantee shall be valid if the following operation conditions are observed:
– the appliance is used in strict accordance with the present manual;
– the safety rules and requirements are observed.
The guarantee does not apply to regular maintenance, cleaning, installation and setup of the appliance at the owner’s location.
The guarantee does not apply in the following cases:
– mechanical damage;
– normal wear of the appliance;
– non-observance of operation requirements or erroneous actions on the part of the user;
– improper installation or transportation;
– natural disasters (lightning, fire, flood, etc.), as well as any other causes beyond the Manufacturer’s or Seller’s control;
– ingress of foreign objects, liquids or insects into the inside of the appliance;
– repairs or modifications to the appliance by unauthorized persons;
– use of the appliance for commercial purposes (loads exceeding normal domestic application), connection of the appliance to utility and telecommunication networks incompliant with national technical standards;
– failure of the following accessories, if replacement of these is allowed by design and does not involve disassembly of the appliance:
a) remote control units, rechargeable batteries, replaceable batteries (power cells), external power supply units and chargers;
b) consumables and accessories (packaging, covers, slings, carry bags, mesh screens, blades, flasks, plates, supports, grilles, spits, hoses, tubes, brushes, nozzles, dust collectors, filters, smell absorbers);
– for battery-powered appliances – operation with inappropriate or depleted batteries;
– for rechargeable battery-powered appliances – any damage caused by improper battery charging and recharging.
The present guarantee is provided by the Manufacturer in addition to the consumer rights determined by the applicable legislation and does not limit these rights in any way.
The Manufacturer shall not be made liable for possible damage, directly or indirectly inflicted by CENTEK brand products on people, domestic animals, the consumer’s or third persons’ property if such damage is inflicted as the result of non-observance of appliance installation and operation requirements, deliberate or negligent actions (omission) by the consumer or third persons, as well as of force majeure circumstances.
Service centers will only accept appliances in a clean state (there should be no food residues, dust and other contamination on the appliance).