CAR AND DRIVER BT3500 Wireless Headset User Manual

BT3500

User Manual

  Overview

1. Adjustable headband
2. Next Track / Volume Up Button
3. Previous Track / Volume Down Button
4. LED Indicator
5. Play / Pause / Power Button
6. Micro-USB Charging Port
7. Microphone Mute / Unmute Button
8. Microphone

Charging

To charge, connect one end of the supplied Micro-USB charging cable to the charging port of the headset, and then connect the other end to a USB power source such as a USB adapter or similar device.

Powering on/off

Powering on
Press and hold the “ Play/Pause/Power ” button for 1 second to turn the headset on.

Power on tone notification

Powering off
Press and hold the “ Play/Pause/Power ” button for 3 seconds to turn the headset off.

Power off tone notification

 Bluetooth connection with your device

  Connection with one device

Case 1: If your headset has never been paired with any device:

1. Turn on the headset and it will automatically enter Bluetooth pairing mode.
2. Turn on Bluetooth in your device’s settings and search for “ BT3500 ”, then tap “ BT3500 ” to connect.

blue once every 10 seconds
Connected tone notification

The headset will automatically be paired with your last successfully connected media device the next time it is turned on.

Case 2: If your headset has been paired before and you want to pair it

with a different device:

1. Press and hold the power button for 3 seconds until the LED indicator alternately flashes blue and red.
2. Turn on Bluetooth in your device’s settings and search for “BT3500” , then tap “BT3500” to connect.

  Connection with two devices

This headset can be seamlessly connected to two different devices at once, allowing you to take calls from two phones without switching back and forth.

Case 1: If your headset has never been paired:

1. Press and hold the power button for 1 second to turn on the headset. The indicator will alternately flash blue and red.
2. Tap “ BT3500 ” from the Bluetooth device list on Phone 1 to connect.
3. After it is successfully connected, proceed to disconnect it from the headset. Then turn off the headset, and press and hold its power button for 3 seconds until it alternately flashes blue and red.
4. Tap “ BT3500 ” from the Bluetooth device list on your Phone 2 to connect.
5. After it is successfully connected, tap the headset’s name on Phone 1 again to connect. Now the headset is connected to both your phones.

Case 2: If your headset has been paired before, but not with either of

these devices:

1. Press and hold the power button for 3 seconds until the indicator alternately flashes blue and red.
2. Repeat from step 2 to step 5 in Case 1.

Case 3: If your headset has been paired with both devices:

1. Press and hold the power button for 1 second to turn on the headset. It will automatically be paired with either one of your phone.
2. Tap “ BT3500 ” from the Bluetooth device list on the other phone to connect.

Case 4: If your headset has been paired with one device, but not both:

1. Press and hold the power button for 3 seconds until the indicator alternately flashes blue and red.
2. Tap “ BT3500 ” from the bluetooth device list on Phone 2 to connect.
3. Tap the headset name again on Phone 1 to connect. Now the headset is connected to both your phones.

• To clear the Bluetooth paired device memory, ensure that the headset is powered on but not paired with any devices. Press and hold the Power Button, Volume Up button, and Volume Down button at the same time for 5 seconds until the LED indicator alternately flashes blue and red once.
• When pairing, please make sure to turn off the Bluetooth of other previously paired devices.

Controls

Music mode

Phone call mode

once.

Voice Assistant mode

Activate voice assistant| Press and hold the “Play / Pause” button for 1 second.
---|---
Exit voice assistant| Press and hold the “Play / Pause” button for 1 second

• When the headset is connected to two phones, you can stream media from Phone 1 to the headset. However, when Phone 2 receives a call, the headset will indicate this by playing the phone call ringtone. After you end the call, it will play the music again.
• The voice assistant can only be activated on the first phone to connect to the headset.

Specifications

Specifications are subject to change without notice.

Safety Statement

Safety Precautions

1. Avoid dropping.
2. Do not disassemble this device.
3. Do not expose this device to rain or moisture or submerge in water.
4. Ideal temperatures are 32°F to 95°F (0°C to 35°C). Avoid extreme temperatures.
5. Keep the device away from excessive heat, such as sunshine, fire or the like.
6. Do not use the device outdoors during thunderstorms.
7. Use original or certified cables.
8. Do not use any corrosive cleaner/oil to clean.
9. Keep out of reach of children. It contains small parts which may be a choking hazard.
10. Observe local laws and regulations while using the device.
11. To prevent damage to your device’s parts or internal circuits, do not use it in dusty, smoky, damp or dirty environments.
12. Do not use, store or transport the device where flammables or explosives are stored. Using your device in these environments increases the risk of explosion or fire.

Hearing Safety

1. To avoid hearing damage, do not listen for extended periods at high volume.
2. Do not turn the volume so high that you’re unable to hear your surroundings.
3. You should use caution or temporarily discontinue use in potentially hazardous situations.

FCC Statement
FCC ID: 2AMSOBT3500
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.

The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

Notice

This product complies with the radio interference requirements of the European Community.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling.
Follow local rules and never dispose of the product and rechargeable batteries with normal household waste.
Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.

Disclaimer

All information, design and specifications contained in this manual were correct at the time of this publication. As the product goes under continuous upgrades and changes, however, the final device may have slight differences. The contents of this manual are subject to change without prior notice, and CAR AND DRIVER will not be liable for any errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this manual.

CAR AND DRIVER IS A REGISTERED TRADEMARK OF HEARST COMMUNICATION, INC. AND USED UNDER LICENSE BY SUMMIT ELECTRONICS, LLC.
©2022 HEARST COMMUNICATION, INC. ALL RIGHTS RESERVED AND ANY USE OF SUCH MARKS BY SUMMIT ELECTRONICS LLC IS UNDER LICENSE.
OTHER TRADEMARKS AND TRADE NAMES ARE THOSE OF THEIR RESPECTIVE OWNERS.

WARNING: CANCER AND REPRODUCTIVE HARM –
WWW.P65WARNINGS.CA.GOV.

SUMMIT ELECTRONICS LLC One Year Limited Warranty

WARRANTY SUMMIT ELECTRONICS LLC LIMITED WARRANTY (“Warranty”) ― For product Categories Listed in Chart Below (as applicable, “Product”) Before returning your Product for service under this Warranty, please (i) read the instruction manual carefully. If you are still having trouble with your Product, please contact Technical Support at support@summitcegroup.com.
Warning: Some Products may contain components that are small enough to be swallowed. Please keep out of reach of children.
Subject to the terms and conditions herein, SUMMIT ELECTRONICS LLC (hereinafter called “SUMMIT ELEC TRONICS LLC”) warrants to the original purchaser of the Product (“Customer”) that for the applicable Warranty Period listed below, the Product will be free from defects in material or workmanship under normal, non-commercial use (“Defects”).
Warranty Period encompasses, as listed below, separate “Coverage Periods” for Parts and Labor, each Coverage Period for one year, to begin from the original date of Customer purchase. If Customer returns a defective Product (or any component thereof) during the applicable Warranty Period, SUMMITELECTRONICSLLC will, at its option, during the specified Coverage Periods for Parts and Labor (as applicable) either: (i) repair the Product (or, as applicable, any component thereof) or (ii) replace the Product (or, as applicable, any component thereof) with a new or refurbished Product (or, as applicable, any component thereof), in either case free of charge to Customer for Parts and/ or Labor (as applicable) during the specified Coverage Period only, and excluding applicable shipping charges (noted below), for which the Customer is responsible. The foregoing states the Customer’s exclusive remedy and SUMMIT ELECTRONICS LLC’s sole liability for breach of the limited warranty contained herein.
This Warranty specifically excludes any Product (or, as applicable, any component thereof) that has been subject to or Defects resulting from: (a) any neglect or misuse by a Customer, an accident, improper application, violation of operating instructions for the product, any other Customer-induced damage, or the alteration or removal of any product serial number: (b) any modification or repair to Product (or, as applicable, any component thereof) by any party other than SUMMIT ELECTRONICS LLC or a party authorized in writing by SUMMIT ELECTRONICS LLC; (c) any damage to Product (or, as applicable, any component thereof) due to power surges, incorrect electrical voltage, misconnection 17 to any device, or malfunction of any device used with the Product (or, as applicable, any component thereof); (d) cosmetic damage to the Product (or, as applicable, any component thereof) caused by normal wear and tear; (e) shipping damage that occurs while the Product is in transit; (f) damage caused by heat sources, sunlight, electromagnetic conditions, or other climatic conditions; or (g) any acts of God. Product is sold to Customer for personal, non-commercial use only. Product is not warranted for Customer’s commercial or rental use. In addition, Product is not warranted against failure, and should not be used by Customer for any application where (i) there is a risk that any data stored on Product will be breached or otherwise compromised, or (ii) the data stored on Product is relied upon for medical or lifesaving applications. SUMMIT ELECTRONICS LLC disclaims any Warranty for any of the foregoing uses to the fullest extent permitted by law. Customer assumes any and all risks associated with such uses of Product and agrees to indemnify SUMMIT ELECTRONICS LLC for any damages claimed against SUMMIT ELECTRONICS LLC for such uses. EXCEPT FOR EXPRESS WARRANTIES STATED ABOVE AND TO THE MAXIMUM EXTENTPERMITTED BYLAW, THE PRODUCTS ARE PROVIDED “AS IS”, AND SUMMIT ELECTRONICS LLC DISCLAIMS ALLOTHER WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY (I) OF ERCHANTABILITY, (II) OF FITNESS FOR APARTICULAR PURPOSE, OR (III) OF NON- INFRINGEMENT OF THIRD-PARTY RIGHTS. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL SUMMIT ELECTRO- NICS LLC BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR PUNITIVE DAMAGES, IN CLUDING, WITHOUT LIMITATION, ANY LOST PROFITS OR REVENUES, LOSS OR INACCURACY OF ANY DATA OR COST OF SUBSTITUTE GOODS, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING NEG LIGENCE) AND EVEN IF SUMMIT ELECTRONICS LLC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, SUMMIT ELECTRONICS LLC’S AGGREGATE LIABILITY TO CUSTOMER FOR ACTUAL DIRECT DAMAGES FOR ANY CAUSE WHATSOEVER SHALL BE LIMITED TO THE CUMULATIVE PRODUCT FEES PAID BY THAT CUSTOMER FOR THE PRODUCT CAUSING THE DAMAGES, IF ANY. This Warranty gives Customer specifics rights, and Customer may also have other rights that vary from jurisdiction to jurisdiction. To obtain Warranty service, Customer must email SUMMIT ELECTRONICS LLC Technical Support prior to making a Product return. Customer must include with Product return the following items (failure to enclose any of these items may result in a delay in the processing of your Warranty claim): (i) a dated sales receipt that indicates the place of purchase, model number of Product, and amount paid; (ii) a detailed description of Customer’s problem with Product; (iii) Customer’s full name, phone number, and return address, and; (iv) a money order made out to SUMMIT ELECTRONICS LLC Electronics Corporation to cover return shipping charges to US destinations only, for the applicable dollar amount shown for the Product in the table above. SUMMIT ELECTRONICS LLC will not make return shipments to a P.O. Box. For shipping to international addresses, actual freight will be charged to Customer. Return your Product freight-prepaid in its original packaging, or packaging that affords an equal measure of protection. Please allow 4 to 6 weeks for the processing of your claim (6 to 8 weeks from November to February).

$7.99
Alarm Clocks, Portable CD Players, Radios, Corded Telephones, MP3 Players, Digital Photo Frames (screen size less than 5”)| $7.99
Portable Stereo Systems, Speaker Systems, Cordless Telephones, Home DVD Players| $14.99
Home Theater DVD Systems, Portable DVD Players, Portable Media Players, Digital Photo Frames (screen sizes 5” to 11”)| $14.99

You must email SUMMIT ELECTRONICS LLC Technical Support prior to making a return. Please ask if you are unsure of which category your product falls under.
*US destinations only.

• Call Us: 833-227-3274
• Message to Us: https://caranddriverdashcams.com
• Email Us: support@caranddrivertech.com

References

• P65WARNINGS.CA.GOV
• Automotive technology and accessories for vehicles – caranddrivertech.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>