CAR AND DRIVER DU900 INTELLIDASH+ with Apple Carplay and Android Auto User Guide
- June 5, 2024
- CAR AND DRIVER
Table of Contents
CAR AND DRIVER DU900 INTELLIDASH+ with Apple Carplay and Android Auto User
Guide
Parts
Step 1: Install Mount
As seen in the figure below, align the four hooks on the mount with the four slots on the INTELLIDASH+, and slide the mount in.
Push and slide the hooks up until you hear a click.
Step 2: Mount the INTELLIDASH+
As seen in the figure below, you can mount the INTELLIDASH+ onto either the dashboard or windshield of your car.
When mounting on the dashboard, you may find the surface of the dashboard is uneven. If so, use the supplied 3M adhesive disk.
Tear off the red 3M sticker, then stick this side to the dashboard.
Press to attach the other side to the suction cup of the mount.
Press the Suction Cup down onto your car’s dashboard or windshield, and push
the lock down to secure it in place.
Step 3: Position the INTELLIDASH+
Step 4: Using the Shock Absorbing Gel Strip
If your INTELLIDASH+ is rattling and/or coming into contact with your dashboard, use the Shock Absorbing Gel Strip to protect your INTELLIDASH+ and dashboard. Just remove the plastic fi lm from both sides, and place it on the bottom of your INTELLIDASH+, or on the dashboard directly below it.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>