CHEMSPEC HDSL4G Heavy Duty Soil Lifter Instructions

: June 5, 2024
: CHEMSPEC

Table of Contents

BACKGROUND
- Key features
PREINSPECTION
ADDITIONAL REFERENCES
HEAVY-DUTY SOIL LIFTER TECHNICAL DATA
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Heavy-Duty Coil Lifter
FOR PROFESSIONAL USE ONLY
Versatile, High Solvency Cleaner for Carpets and Upholstery

BACKGROUND

Heavy-Duty Soil Lifter (HDSL) is a blend of solvents and surfactants. It can be dispersed in water for use in a variety of cleaning processes. The high solvency allows HDSL to attack greasy, oily soils. Because the product is dispersible in water, however, it can still be rinsed from the fibers thus reducing residues and odor.
Note that HDSL is not available for sale in the State of California.

Key features

Suitable for use in multiple carpets and upholstery wet cleaning processes
Low moisture upholstery cleaning
Spot removal
Removing soil filtration lines
Booster to traffic lane cleaners
Woolsafe Certified

PREINSPECTION

Inspect the area and test product compatibility with the surface before doing any work. Note any surface defects on your inspection report and discuss them with the customer.

PREPARATION

Dry vacuum the item to remove as much dry soil as possible.

WORK PROCESSES

Upholstery wet cleaning pre-spray:

Mix 25 oz. (739 mL) with 1 gal. (3.8 L) of water.
Lightly apply onto fabric, agitate with a soft brush
Wet extract using All Fiber Textile Rinse.

Upholstery low moisture pre-spray:

Use undiluted. and lightly apply onto fabric
Agitate with a soft brush
Wet extract using All Fiber Textile Rinse.

Prespray for carpeting:

Mix 25 oz. (739 mL) with 1 gal. (3.8 L) of water.
Using a clean sprayer with coarse spray, apply evenly to the soiled carpet.
Brush the area with a hand pile brush, then rinses extract.

Soil filtration lines/filtration soil:

Evenly apply a course spray onto the filtration lines
Aggressively agitate into the fiber with a brush.
Rinse extract.

Spotter:

Apply undiluted to a clean white cloth
Blot spot or stain until the soil is removed. Keep rotating the cloth as it becomes loaded with soil.
Rinse with All Fiber Textile Rinse using an extraction machine.

Additive to traffic lane cleaners

For use with inline sprayers: add 6 oz. (177 mL) to the 5 quart container along with the standard traffic lane cleaner.
For pump up or pressure, sprayers add 2 oz. (59 mL) per gallon along with the standard traffic lane cleaner
Prespray and extract as normal

CLEAN UP

Check all PPE for damage. Repair or replace as needed.
Clean the outside of the spraying equipment to remove soot and soil. This will help to prevent cross-contamination and will maintain your professional image on the next job.
Rinse containers and dispensing equipment to remove product residues and wastewater. Be sure to dispose of waste water properly. Never dispose into surface waters, on the ground, or into a storm drain.
Flush the sprayer with water to remove any product residue. Solvents can soften seals and plastic components so are sure to rinse the equipment.
Wash hands after using the product.

SAFETY CONSIDERATIONS

Keep children and pets away from chemical products, equipment, and the work area.
Read the Safety Data Sheet (SDS) for any chemical product before using that product.
Wipe any surfaces where there has been a spill or overspray of the product or the ready-to-use solution.

ADDITIONAL REFERENCES

User Guides and Safety Data Sheets (SDS) are available at LegendBrandsCleaning.com
For technical support call 800-332-6037
For medical advice related to exposure to this product, call Infotrac at 800-535-5053 (USA) / 352-323-3500 (worldwide).