TT-BH22 TaoTronics Active Noise Cancelling Wireless Stereo Headphones User Guide
- June 5, 2024
- TaoTronics
Table of Contents
TT-BH22 TaoTronics Active Noise Cancelling Wireless Stereo Headphones User
Guide
Product Diagram
- ANC LED Indicator
- ANC ON / OFF Button
- 3.5mm Audio Port
- Multifunction Button
- LED Indicator
- Volume + / Next
- Volume – / Previous
- Microphone
- Micro USB Charging Port
Package Contents
- 1 x Tao Tronics Active Noise Cancelling Wireless Stereo Headphones
- 1 x USB Charging Cable
- 1 x 3.5mm Audio Cable
- 1 x Carrying Case
- 1 x User Guide
How to Use
-
Charging
-
Connect the charging port to any USB charging adapter or active computer USB port.
-
Charging will start automatically with the LED indicator turning red.
-
The headphones are fully charged when the LED indicator turns blue.
Note: -
Make sure the battery is fully charged before putting the headphones away for storage.
-
Charge the headphones at least once every 3 months when not using for a long time.
-
Pairing
-
Make sure the headphones and your Bluetooth device are next to each other (within 3 feet / 1 meter).
-
The first time you use the headphones, press and hold the Multifunction Button until the LED indicator flashes red and blue alternately. Now the headphones are in pairing mode.
-
Activate Bluetooth on your phone and search for nearby Bluetooth connections. Find
“Tao Tronics TT-BH22” in the search results and connect. Once connected, the LED indicator will flash blue.
Note:
If the headphones cannot pair with your Bluetooth device, clear the pairing history as below:
- Turn on the Bluetooth headphones and bring it into pairing mode, the indicator will flash red and blue alternatively.
- Press and hold the Volume + / – Buttons at the same time for 7 seconds until the LED indicator flashes purple once and 2 beep sounds are heard.
- You can just pair the headphones just like when they are new.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sunvalleytek International Inc. is under license. Other trademarks and trade names are those of their respective owners.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the
product and its electronic accessories should not be disposed of with other
household waste at the end of their working life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, please
separate these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources. Household users should
contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take these items for
environmentally safe recycling. Business users should contact their supplier
and check the terms and conditions of the purchase contract. This product and
its electronic accessories should not be mixed with other commercial wastes
for disposal.
E-mail:
[email protected]
MANUFACTURER
Shenzhen NearbyExpress Technology Development Co.,Ltd.
Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China
Learn more about the EU Declaration of Conformity:
https://www.taotronics.com/pages/user-manual