DAEMA DFZ-700SCDK Display Showcase User Manual

USER MANUAL
Model prz.700sCcDK DFZz-400SCDK
DFZ-268SCDK DFZ-688SCDK

SAFETY PRECAUTIONS

• The purpose of the safety precautions in this manualis to ensure safe and correct use of the unit to minimize risks that could cause serious damage and injury to you or other persons. The safety precautions are divided into  WARNINGS and CAUTIONS. Cases where improper handling of the unit could lead to death or serious injury are listed under the AWARNING” heading. However, the cases listed under the ACAUTION” heading could alsolead to  serious results. To ensure the safety, adhere strictly to both types of safety precautions.
• Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• This appliance is not intended for use by persons(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use  of the appliance by a personresponsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do notuse mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
• Do not damage the refrigerant circuit.

WARNING Improper handling of the unit could lead fo death or serious injury.
CAUTION Improper handing of fhe unit couid lead fo serious resulfs depending on fhe circumstances.

• Text set off by the exclamation mark contains information that should be strictly adhered to.
• After reading the instruction manual, store it an easily accessible place where the user(s) of this product can easily find it.

PRECAUTIONS FOR USE

WARNING
All repairs, disassembly and modifications should be performed only by qualified technicians. Attempting to perform these yourself could result in a fire, malfunction, and injury. alfunction, and injury.

Never splash water directly onto the product or wash with water as shortcircuit and electrical leakage could result.

Never put flammable or volatile substances into the unit as explosion and fire could result.

Do not damage, modify, excessively bend, strain, twist or bundle up the power cord. Also, placing heavy obijects the power cord or squeezing it in a tight place could damage it, possible resulting in electrical shock or fire.

Use a dedicated wall outlet. Do not use extension cords or convenience receptacles as this could result in electrical shock, overheating and a fire.

Never use flammable spray cans or leave flammable substances near the unit. Sparks from electrical switches could result in explosion and fire.

The cooler is infended for storage and display of beverages for sale. Do not use for other purpose than intended as this could adversely affect items placed in the unit.

Never atfempt fo insert fingers, sficks, efc.
Into the cold air suction ouflet as a circulation fan is rotating at high speed inside the outlet.
Injury, electrical shock and improper operation could result

For indoor use only. Using the unit in a location exposed to rain could result in electrical leakage and electrical shock.

Never place heavy objects or items containing water on top of the unit. Objects could fall down and cause injury and spilled water could deteriorate the insulation of electrical components and result in electrical leakage.

Install the unit in a location where the floor is sturdy enough fo support the load of the unit. If the floor is not sturdy enough or installation is incorrectly performed, the unif could tip over and falling shelves and products could cause personal injury.

If you find gas leakage,please don’t fouch the unit.Gas leakage could cause explosion, fire, and fire injury.

Leave disassembly and disposal of the unit to qualified experts.

Keep away from hot air sources
Cooling performance is reduced if the unit is placed near heat sources such as hot plates and stoves and if it is exposed to direct sunlight.

WELL VENTILATED PLACE
Please make sure there is more than10cm space between UPRIGHT cooLERand the wall. If there is no space, cooling capacity can drop down.

If installation in a damp location is unavoidable, install an electrical leakage circuit breaker. If electrical leakage circuit breaker is not installed, could result in electrical shock.

Never hang from the door or climb onfo the unit. The unit could tip over or fall and cause material damage or injury.

Disconnect the power cord plug from the wall outlet before moving the unit and make sure that the power cord is not damaged during fransport.
A damaged power cord could result in electrical shock and/or fire.

Grasp the handle when closing the door.
Holding at other positions could result in Pinched fingers and injury.

Do not push hand against or apply excessive force fo glass surfaces as the glass could break and cause injury.

When disconnecting the power cord plug from the wall outlet, hold at the plug main body close to the outlet. Pulling the cord could cause wire breakage, possibly resulting in overheating and fire.

Make sure that the unit does not tip over or fall when it is moved. A falling unit could cause serious injury.

Do not throw items onto the shelves and do not place items more than 65Ibs on each shelf. The shelf could fall down, possibly causing injury.

Be sure to attach and secure shelves correctly. An improperly attached shelf could fall down and cause injury.

SPECIFICATIONS

Model| DFZ-268SCDK||
---|---|---
Rated Voltage| 220-240V~
Rated Wattage| 460W|
Frequency| 50Hz

HOW TO USE

• Remove shipping package, tape, etc, and leave doors open ventilate for a while.
• The unit is cleaned before shipment. However, clean the compartment interior after delivery.
• Please insert power supply plug into the wall outlet.
• Allow the unit to operate for about 1 hour to cool the compartment before placing items in the cooler.

WAIT 5 MINUTES OR MORE BEFORE RE-STARTING

• Restarting the unit immediately after it has been tumned off may cause fuses to blow and activate the circuit-breaker, the compressor may be overloaded, and/or other damage may occur.

THERMOSTAT INSTRUCTION

Operation
Control Panel
The control panel is located below the doors on the front of the appliance.
Turn On

1. Turn the Power switch On.
2. Set the temperature to the desired setting (see below).
3. Close the door of the appliance.
4. Connect the appliance to a mains power supply.
   Note: The Cooling Light is illuminated when the appliance is chilling the interior cabinet.

Set the Operating Temperature

1. Press the button. The display will flash.
2. Press the buttons to display the required temperature.
3. Press the E] button to store the temperature.

Note: If a manual defrost is started this resets the automatic defrost timer. During defrost periods the Defrost light is illuminated.

HOW TO USE

DRAIN TRAY

• Defrosting is performed automatically and drain water is collected in the drain tray.
• Water in the drain tray is evaporated automatically. In humidity,there is a large amount of water in the drain tray, so please throw away drain water once a day.

EFFICIENT USE

• To prevent cold air from escaping, open and close the door quickly and keep the door opened for as short a time as possible.
• Please install the unit in the place which is well-ventilated.

SHELF HEIGHT ADJUSTMENT
The shelf height can be adjusted.
Arrange the shelves in accordance with the dimensions of the items to be placed in the cooler.
PLACING ITEMS IN THE SHOWCASE

This showcase employs a forced circulation of cold air system. If circulation of cold air is obstructed, the items will not be adequately refrigerated. Pay attention to the following points:

• Do not let items obstruct the cold air inlet and suction outlet.
• Place items so that they do not protrude from the shelves. The gap between the shelves and the
• door is used for circulation of cold air.
• Place items evenly on all shelves.
  Please do not display goods on the bottom. Please put goods on the shelf.
  Commercial refrigeration display cooler.

IN GASE OF THE FOLLOWING

POWER FAILURE
Keep opening and closing of the door to a minimum.
Avoid placing new items in the cooler as this will raise the temperature inside the compartment.
WHEN NOT USED FOR A LONG PERIOD
Remove all items from the compartment and disconnect the power cord plug from the wall outlet.
Clean the compartment interior and wipe away all water.
To prevent mold formation and bad smell, leave the door open to dry the compartment completely.
TRANSPORTATION
Disconnect the power cord plug from the wall outlet.
When moving the cooler, make sure that the feet do not damage the power cord.
Do not let the feet hit against floor steps, thresholds, etc.
TEMPORARY STORAGE
Affix a piece of wood, etc. Between the door and main unit o prevent complete closing of the door.
Make sure not to store the unused cooler at a location where children play.
Should a child enter the compartment and the door is closed, the child may not be able to open the door from the inside.

TROUBLE-SHOOTING

Please check the following items if you encounter problems with the unit. If the problem continues after taking the proper remedial actions, disconnect the power cord plug from the wall outlet.
Transfer the items stored in the cooler to a box or other container. Then contact the dealer from whom you purchased this unit and be ready to provide information as listed in “REQUIRED INFORMATION” below.
To prevent any electrical shock hazards, do not disconnect the power cord plug from the wall outlet with wet hands.

No refrigeration
atall| Is the power supply interrupted?
Is the power cord plug disconnected from the wall outlet?
Are the shop’s power fuses blown and/or the circuit breaker activated?
---|---
Inadequate
refrigeration| Is the temperature setting appropriate?
Are items obstructing the cold air inlet and suction outlet?
Are stored items packed too tight?
Is the door open or is it opened and closed frequently?
Is the condenser clogged?
Excessive noise| Are all feet in firm contact with the floor?
Is the rear panel of the cooler contacting the wall or other objects?
Are other objects in contact with the cooler?
Condensation
on cooler
exterior| Condensation may condense on the exterior and door during hot and
humid days or depending on the place of installation. This occurs when
the humidity is high and water particles in the air contact cold surfaces.
This is normal.wipe away condensation with a dry cloth.

Display showcase sometimes stop running when thermostat turns off.

CLEANING

To prevent any electrical shock hazards or injury by rotating circulation fan, always disconnect the power cord plug from the wall outlet before cleaning.

EXTERIOR AND COOLER COMPARTMENT
Wipe with a soft, dry cloth. If very soiled, wipe with a cloth that has been moistened with a detergent.
Then wipe with a cloth that has been dipped in water.
WARNING: Do not splash water directly onto the cooler and do not wash with water.
Short – circuit and electrical shock could result.

• Clean the cooler regularly to keep it clean at all times.
• Never use polishing powder, soap powder, benzine, oil or hot water as these will damage the painting and plastic components.

CHECKS
To ensure the safety, perform the following checks after cleaning.

• Is the power cord plug firmly inserted into a dedicated wall outlet? Confirm that the plug is not abnormally hot.
• Check the power cord for cracks and damage. Should the slightest irregularity be observed, contact the dealer from whom you purchased this unit or our customer’s service.

This marking indicates that this product should not be disposed with other household wastes throughout the nation. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recyele it responsibly  to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe  recycling.

Distributed by:
DAEWOO ELECTRONICS SALES & SERVICES SDN. BHD.
Lot 886, Bay B2-B4, Jalan Subang 9,
Taman Perindustrian Subang,
Batu 14, Jalan Puchong-Hicom,
47100 Puchong, Selangor
Darul Ehsan.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>