Huizhou Xinghongtai Electrionics D45000 Dog Training Collar User Manual
- June 5, 2024
- Huizhou Xinghongtai Electrionics
Table of Contents
DOG TRAINING COLLAR
MODEL
D4-500
Manual
COMPONENTS
(Components 7 8 9 refer to page 10 for more information)
OVERVIEW
Handheld Remote
Screen
Receiver
|
---|---
Operation
Step 1: The First Time Connection
- Transmitter: Rotate the button to the power-on state, hear a beep, the transmitter is powered on.
- Press and hold the 1/2 button for 5 seconds, the number 1 flashes, indicating dog 1.
- Receiver connection: Press and hold the power button for 30 seconds, after hearing the second beep, the blue light flashes, and the display has a dog head mark , indicating that dog 1 is connected successfully.
- If the blue light not flashing, press and hold for 2 seconds to power off, then press and hold for 30 seconds to connect again.
- ,Press the sound button of the transmitter, the receiver will give feedback, confirming that the connection is successful.
Step 2: Vibrate and Shock Setting
- Press the vibration key and the setting key at the same time for 2 seconds, hear a continuous beep, and then turn the button to set the vibration level. Press the lock key to save.
- (Set the vibration level again, vibration key and the setting key at the same time for 2 seconds, hear a continuous beep, and turn-we button to set the vibration level. Press the lock button to save.)
2. Press the shock key and the setting key at the same time for 2 seconds, hear a continuous beep, and turn the button to set the shock level_ Press the lock button to save.
*(To set the shock level again, press the shock button and the set button at the same time for 2 seconds, hear a continuous beep, and turn the button to set the snock level. Press the lock button to save. )
Step 3: Lock/Unlock
Press the lock button for 5 seconds, the transmitter is in the protection
state, other key operations are invalid, only the rotary switch can work,
press the lock button for 5 seconds to unlock.
Step 4: Add other Dogs
Press the 1/2 button once to the number 2, then press and hold the 1/2 button
for 5 seconds until the number 2 flashes, at this time, press and hold the
power button of the receiver 2 for 30 seconds, the blue light flashes, and the
display has a dog portrait, indicating that it is connected success.
According to the steps of dog 1, set the level of vibration and electric
shock for dog 2. And so on for other dogs, up to a maximum of 9 dogs.
Step 5: Remove the Dogs
Press the 1/2 key to select the dog 1 to be deleted, then press the 1/2 key
for 5 seconds until the number 1 flashes, and then press the set key 10
seconds it, delete it.
Other Functions
Continuous use time:Both Transmitter and receiver more than 8 hours. Charging
time 2 hours
Display: Color LCD negative display
Wireless distance: Wireless two-way transmission distance of 500 meters in
open space
Low battery alert: When battery lower than 10%, the red light will flash, LCD
screen of battery icon flashes. Automatic shutdown, when voltage is lower than
3.3V.
Bidirectional function:The LCD screen .4 grids to display the signal strength
of the wireless signal.
Received signal strength feedback.
Display out-of-control warning feedback.
Important Safety Information
This Is the safety alert symbol. It is used to alert you to potential Injury hazards. Obey all safety messages that follow this symbol to avoid possible Injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could
result in serious injury.
Not for use with aggressive dogs. Do not use this product If your dog is prone
to aggressive behavior. Aggressive dogs can cause severe injury to their
owners and others. If you are not sure that this product is right for your
dog, please talk to your veterinarian or a certified trainer.
CAUTION
CAUTION, used with the safety alert symbol, indicates a hazardous
situation, which, if not avoided could result in minor or moderate injury.
- Safety during on-leash training. It is vitally important that you and your dog remain safe while learning during on-leash training. Your dog should be on a strong leash, long enough for him to attempt to chase an object, but short enough for him not to reach a road or other unsafe area. You must also be physically strong enough to restrain your dog when he tries to chase.
- This pet training device is not a toy, keep away from children.
CAUTION
CAUTION, used without the safety alert symbol, indicates a hazardous
situation, which, if not avoided, could result in harm to your pet. Risk of
skin damage. Please read and follow the instructions In this manual. Proper
fit of the collar is important. A collar worn for too long or made too tight
on the pets neck may cause skin damage. Ranging from redness to pressure
ulcers; this condition Is commonly known as bed sores.
- Avoid leaving the collar on the dog for more than 12 hours per day.
- Possible reposition the collar on the pet’s neck every 1 to 3 hours.
- Check the fit to prevent excessive pressure; follow the instructions in this manual.
- Never connect a leash to the electronic collar; It will cause excessive pressure on the contact points.
- When using a separate collar for a leash, don’t put pressure on the electronic collar.
- Wash the dog’s neck area and the contacts of the collar weekly with a damp cloth.
- Check the contact area daily for signs of a rash or a sore.
- If a rash or sore is found, discontinue use of the collar until the skin has healed. If the condition persists beyond 48 hours. see your veterinarian.
Manufacture
Produce: Huizhou Xinghongtai Electronics Co.,Ltd.
Address: 1&2F.Plant 2,Zhonghai Technology Huizhou Co.,Ltd. Daya Bay ;West
District ,Huizhou,Guangdong ,China.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.