ALPINE KTE-RS12G 12-inch Subwoofer Grille Kit Installation Guide
- June 13, 2024
- Alpine
Table of Contents
ALPINE KTE-RS12G 12-inch Subwoofer Grille Kit
Product Information
The KTE-RS12G is a 12-inch Subwoofer Grille Kit designed to protect and enhance the appearance of your subwoofer. It is compatible with 12-inch subwoofers. The KTE-RSlOG, on the other hand, is a 10-inch Subwoofer Grille Kit designed for 10-inch subwoofers.
Product Usage Instructions
- Contents:
- 1 x Subwoofer Grille
- 1 x Trim Ring
- Installation Steps:
- Prepare your subwoofer by ensuring it is securely mounted.
- Remove any existing grille from the subwoofer, if applicable.
- Place the grille over the subwoofer, aligning it with the mounting holes.
- Attach the trim ring onto the grille, ensuring it fits snugly.
- Secure the grille and trim ring in place using the provided screws or clips.
Follow these instructions carefully to ensure proper installation of the KTE- RS12G or KTE-RSlOG Subwoofer Grille Kit. For further assistance, refer to the full user manual or contact our customer support.
KTE-RS12G
12-inch Subwoofer Grille Kit
Trousse de grille de h.-p.d’ extremes graves 12 po
KTE-RSlOG
10-inch Subwoofer Grille Kit
Trousse de grille de h.-p.d’ extremes graves 10 po
CONTENTS
INSTALLATION STEPS
REMOVE THE TRIM RING
- Hold frame in place
- Lift up the Plastic Ring
INSTALL GRILLE & TRIM RING
- Place included grille over the subwoofer
- Then place trim ring over grill and onto the subwoofer frame aligning the frame screw holes
TIGHTEN TRIM RING TO CABINET
- Make sure the Alpine Logo is lined up
- Install 8 Screw (Not Included)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>