Pioneer TS-M650PRO High Efficiency Midbass Instruction Manual
- June 5, 2024
- Pioneer
Table of Contents
Pioneer TS-M650PRO High-Efficiency Midbass
Instruction Manual
Be sure to read this instruction manual before installing this speaker.
WARNING
Handling the cord on this product or cords associated with accessories sold with the product may expose you to chemicals listed on proposition 65 known to the State of California and other governmental entities to cause cancer and birth defect or other reproductive harm. Wash hands after handling.
The Safety of Your Ears is in Your Hands
Get the most out of your equipment by playing it at a safe level a level
thatlets the sound come through clearty without annoying blaring or distortion
and most importantly, without affecting your sensitive hearing Sound can be
deceiving. Over time, your hearing “comfort level” adapts to higher volumes of
sound, so what sounds “normal can actually be loud and harmful to your
hearing. Guard against this by setting your equipment at a safe level BEFORE
your hearing adapts.
ESTABLISH A SAFE LEVEL:
Set your volume control at a low setting. Slowly increase the sound until you
can hear it comfortably and clearly, without distortion. Once you have
established a comfortable sound level, set the dial and leave it there.
BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:
Do not turn up the volume so high that you can’t hear whať’s around you.Use
caution or temporarily discontinue use in potentially hazardous situations. Do
not use headphones while operating a motorized vehicle; the use of headphones
may create a traffic hazard and is illegal in many areas.
CAUTION
- Do not touch the speaker flexible wire.
- Do not change the direction of the speaker terminal assembly
- Make sure lead and speaker terminals do not contact metal.
- When making connections, refer also to the instruction manual of the car stereo used.
Flush-Mount Car Speaker
17 cm (6-3/4″) HIGH EFFICIENCY MIDBASS
FEATURES
- HIGH SENSITIVITY AND HIGH POWER HANDLING DESIGN
- LIGHTWEIGHT YET RIGID PULP CONE WITH CORRUGATION SURROUND
- THICK STEEL W0OFER BASKET
- LARGE MAGNET AND HIGH POWER MOTOR ASSEMBLY
SPECIFICATIONS
- Reproduction system
- Speaker specifications
- Size
- Cone
- 168 mm (6-5/8″ Dia.)
- Optimally blended pulp cone
- Corrugation surround
- Heat-resistant voice coil
- Strontium magnet: 1 010 g (2 lb 4 oz)
- Nominal impedance 4 Q
- Maximum music power [Nominal]
- 500 w [110 w
- .94 dB (+1.5 dB)
- Weight (per speaker including accessory parts)
- . 2.71 kg (5 lb 16 oz)
- Gross weight (2 speakers including packaging)
- .5.84 kg (12 lb 14 oz)
- Sensitivity
HOW TO INSTALL
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>