XTREMEPOWERUS 47520 Drain Cleaner Owner’s Manual
- June 5, 2024
- XTREMEPOWERUS
Table of Contents
- XTREMEPOWERUS 47520 Drain Cleaner
- IMPORTANT SAFETY INFORMATION
- Basic Safety Code
- Important safety instructions for battery pack
- Prompt for Maintaining Maximum Battery Pack Service Life
- Please keep this instruction
- DESCRIPTION
- OPERATION
- Charging
- EXPLODER DRAWING
- PART LIST
- SERVICE
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
XTREMEPOWERUS 47520 Drain Cleaner
IMPORTANT SAFETY INFORMATION
Some safety identification symbols and professional vocabulary are used to
express the important safety precautions and safety practices in this manual
and the product. This section is intended to help readers better understand
these symbols and terms.This is the safety warning symbol – used as a warning
of some potential personal injury
hazards. Follow the guidance of safety information to avoid possible injury
accidents, or even
death.
Danger warning symbol
indicating that there are dangerous situations around which, if not
avoided, could result in death and serious injury accidents.
Warning symbol
indicating dangerous situations which, if not avoided, could result in
death or serious injury accidents.
Caution symbol
indicating dangerous situations which, if not avoided, could result in
minor or moderate injury accidents.
Notice symbols
indicating safety information related to the protection of the property,
which means that the user must read the operation manual carefully before
using the tool, since
important safety precautions and proper method of application are introduced
in the operation manual. This symbol indicates that you must always wear
safety cover and safety goggles and pay attention when operating the tools.
The symbol indicates that there are certain risks that the hand, finger or
other parts of the body may be bruised
Basic Safety Code
Please read all safety precautions and safety instructions carefully. Failure to comply with these safety instructions may result in electric shock, fire, or even other serious injury incidents Please keep these safety precautions and safety instructions for future reference. Power tool means two types of equipment: one with power cord and directly powered by external power supply and another without power cord and powered by battery
Work Area Safety
- Keep the workplace clean and tidy and with sufficient lighting. Chaos and darkness of the environment are likely to cause safety accidents.
- Do not operate the machine in hazardous environments that is flammable and explosive, such as flammable and explosive liquids, gases or dust Power tools are prone to generate sparks that can ignite these dusts or gases.
- When operating the machine, keep unrelated personnel (including children, bystanders, non-staff, etc.) away from the work site. Distraction could easily lead to the occurrence of safety accidents.
Electrical Safety
- The power tool plug should match the socket. Do not change the plug at all times. Do not connect the adapter of the plug of grounded power tool to be used together. Not changing the plug and matching the socket will reduce the occurrence of electric shock.
- Do not place the power tools in rain or in a humid environment. Liquid entering the power tool will increase the risk of electric shock.
- Do not damage the power cord. Do not use the power cord to drag and pull the power tool. Keep the power cord away from hot, oil, sharp edges or moving objects. Damage to the power cord or other objects twined can increase the risk of electric shock.
- When using the power tool outdoors, please use a wiring board suitable for outdoor operation.
- Avoid using the power tools in a humid environment. Please use the GFCI protection device, which can reduce the risk of electric shock.
Personal Safety
-
When using the power tools, keep a clear head and concentrate. Do not use power tools in the event of fatigue or affected by medicine, alcohol or drugs. Careless operation will lead to serious injury accidents.
-
Use personal protective equipment properly and always wear safety goggles. Personal protective equipment includes dust masks, non-slip safety shoes, hard mats or thermal protection devices. Appropriate use of the protective equipment will reduce the personal injury accidents.
-
Keep the body in balance and do not lose balance when operating the machine. This will help you better control the tools in the case of accidents.
Please use designated charger specified by the manufacturer only. It might cause fire when one type of charger is used for another type of battery pack. 2.Electric power tool can apply the designated battery packs, otherwise application of other battery packs might cause personal injuries or fire. 3When battery pack is not used, please place it away from metallic objects like paper clips, coins, keys, nails, screws or other small metal materials, which may form connection from one end to the other, short circuit the battery terminal and cause burning or fire. -
When overused, there may be liquid flowing out of the battery. Please avoid direct body contact. If there is accidental contact with battery drain, please rinse with water. In case of eye exposure, please see a doctor. Battery drain might cause allergic inflammation
Important safety instructions for battery pack
- Before use of battery pack, please review all relevant instructions and warning labels of the (1) charger, (2)battery pack and products that (3) need to use battery pack.
- Non-detachable battery pack..
- If the working hours are too short, it shall immediately stop operation; otherwise, it may cause overheating, burning or even exploding.
- In case of eye exposure to electrolyte, rinse eyes with water immediately and ask for doctor’s advice, otherwise, it might cause blindness.
- When the battery pack is not used, be sure to use the battery cover to cover the battery pack terminal.
- Do not make the battery pack short circuited
- Do not make any conductor contact the terminal of the battery pack
- Do not place the battery pack in the containers with iron nails, coins and other metallic objects.
- Do not place the battery pack in areas with water or may be affected by rain. Battery short circuit will cause a huge current to pass and overheat, which might result in burning or even accidents.
- Do not place the host machine and battery pack in areas above 50° (122° F).
- Even if the battery pack is seriously damaged or completely depleted, do not burn it, otherwise the battery pack will be exploded in the fire.
- Be careful not to cause falling off or collide with the battery pack.
Prompt for Maintaining Maximum Battery Pack Service Life
- Charge the battery pack before full discharge. When the machine is found to be under-powered, be sure to stop operating the machine and charge the battery pack.
- Do not charge the charged battery pack. Overcharging will shorten the service life of the battery pack.
- Charge the battery pack with ambient temperature at 0°-45° (32° F-113° F), please cool down the heated before charging.
- When battery pack is not used for over six months, charge the ni-mh battery pack.
Service
Product repair service shall be only conducted by the qualified maintenance
personnel with accepted parts, so as to ensure use safety and correct
maintenance of tools.
Please keep this instruction
Warning:
It may cause serious personal injuries due to improper use or failure to
observe the safety rules specified in this operation manual.
Machine safety:
- Do not use soft gloves or cloth to hold the rotating flexible shaft, which may cause serious injury if twined in the flexible shaft.
- Do not over-deliver the flexible shaft, excessive deliver due to blockage may cause the winding or break off of flexible shaft and cause serious injury
- Keep the tool as close as possible to the pipe. When the tool is difficult to approach the pipe, use the front guide tube. If the distance is too long, it may cause the winding or break off of flexible shaft.
- Do not operate the machine while reversing (pressing the forward and reverse rotation button R). Operating in the (R) state can cause damage to the flexible shaft. The button (R) is only used to exit the flexible axis in case of blocking.
- Use the guide hose to prevent the flexible shaft from bringing foreign matter when jittering.
- After using detergent in the pipe, avoid direct contact with skin or eyes. Some detergents can cause severe burns.
- The function of this tool is to clean and dredge the pipes. Please follow the instructions in the operation manual. Wrong use can cause injury.
- The function of this tool is to clean and dredge the pipes. Please follow the instructions in the operation manual. Wrong use can cause injury.
DESCRIPTION
OPERATION
Check before Operation
- Make sure the battery pack is unplugged.
- Check if the cable plug is damaged.
- Check if the waterproof plug on the drum is installed and the wrench is removed.
- Check if there are damaged machine parts that may pose a threat to your safety.
- Lubricate the flexible shaft in according to the operation manual.
- Selection of appropriate accessories for pipe dredge can improve the efficiency and quality of dredging.
- Before using, clean up the dirt on handle and the machine body.
- Check if the flexible shaft is worn or damaged. In the cases of worn flat, corrosion and bending deformation, please immediately replace the flexible shaft.
- Check the workplace to ensure sufficient lighting, no flammable liquid, gas or dust. Check the connection of cable and socket to ensure that the cable will not be damaged.
- Do not place the side of the flexible shaft towards the operator or other people.
Operating Instructions:
Notice: Before using the machine, you must be familiar with the functions
and be proficient in operating it.
Charging
The charger could be charged under the temperature is from O to 45·c Put the battery into the charger, then plug the Charger into the power supply and the red charging light will activate.showing that power is supplied to the Charger. When the red light is off, the green charging indicator will light, check the battery capacity showing, if all three lights are on, show the battery is fully charged.
(ATTENTION: If the green light is on, but three lights for the battery capacity showing are not on all in 2 hours, that indicates the battery and the charger are in trouble, pis stop using, and check with the maintained man.) After charging, unplug the charger, and remove the battery immediately from the charger. Allow the battery pack to cool completely before using it. This charger (included in the tool) is specialized for the lithium tools.
WARNING! Do Not use a different Charger or Battery
Capacity Showing
For making sure the capacity of the battery, we design one capacity showing on
the bottom of the battery pack , also with three capacity showing lights.
Press the button, it indicates it is full charge when the three lights on; Two
light for 50% capacity; One light for out of power almost.
Installation and Disassemble of Battery Pack
- When the battery pack is inserted in or taken out, please be sure to switch off the tool power.
- When the battery pack is dismantled, press the button at the end of the battery pack and pull it out from the tool.
- When inserting the battery pack, align the reed on the battery pack with the groove on the housing and push the slide in place. Then, be sure to insert it to the bottom until there is a clicking sound; otherwise, the battery pack will fall off from the battery pack, which might cause injury to the operator or the others.
- Do not push too hard when inserting the batch pack. If the battery pack doesn’t slide smoothly, it may be caused by improper insertion
Switch variable speed
Control the speed between 0-560RPM, exert pressure on the switch: the greater
the pressure, the higher the speed.
Switch forward and reverse rotation
This switch can control the steering of the flexible shaft: press the “.-” for
forward rotation and press the”->” for reverse rotation, when the driving
lever is in the middle and the trigger is in the state of self-lock. It is
required to confirm the rotation direction before operation. The forward and
reverse rotation push button can be switched when the tool completely stops
rotating. When tools are not used, please be sure to switch the forward and
reverse rotation push button in the middle state in case of mis-operation.
Pipe dredge (before operation, be familiar with the automatic scaling operation of the flexible shaft, otherwise it will lead to personal injury or damage to the tool) Please place the tool head at a distance of less than 150mm away from the pipe opening. If the distance is too long, it will cause the flexible cable to be twisted and knotted; and do not place the tool head too close to the pipe, which is inconvenient to observe the condition of the flexible cable
Press the forward and reverse rotation button”<—-“, press the speed switch slightly, press the trigger, and the flexible cable will be delivered forward to start dredging; after dredging the pipe, press”–,” to retract the flexible cable; ln the cases of blockage or blocked cornering of the flexible cable, reverse the flexible cable for a certain distance, and then pull forward to deliver again. Repeatedly move forward and backward the operating to dredge the pipe and move through the corners.
Do not force the delivery of the flexible cable, otherwise the flexible cable will twist knotted or be broken and cause serious injury;
Notice : Situations of pipe blockage are varied, it is necessary to closely observe the situation of the flexible shaft when using it. If it is distorted or blocked, stop the machine immediately, and then take different operations according to the actual situation. If the pipe cannot be dredged, please ask for professional for help. Do not force the operation and cause unnecessary troubles. How to replace the flexible cable f1 Please check if the battery pack is unplugged before replacing it!
- Take out the flexible shaft .
- Unscrew the 3.9*30 screws with an Allen wrench, open the drum.
- Pay attention to the flexible cable head assemble way and rolling direction, keep the same rolling way.
- Unscrew the 4.8 *8 cross tapping screw with the screwdriver, pull out the cable from the tool head, and insert the new flexible cable. (See Fig.5)
- Bend the head 5cm to about 150° , rotate it in the drum counterclockwise, install it in the previous position and fix it. (See Fig.6)
EXPLODER DRAWING
PART LIST
No. | Description | Q’ty | No | Description | Q’ty | |
---|---|---|---|---|---|---|
07×5 .5m flexible cable | 23 | ST4.8x1Q screw | ||||
2 | Guide ring | 24 | Drum bottom cover | |||
3 | Bearing seat | 25 | Water-proof plug | |||
4 | switch button | 26 | Drill connector | |||
5 | Spring washer | 1 | 27 | Reduction gearbox assem. | ||
6 | Bearing | 3 | 28 | M3x5 screw | 2 | |
7 | ST5.5×20 screw | 3 | 29 | Connector | ||
8 | Push button spring | 3 | 30 | ST2.9×1 4 screw | 3 | |
9 | ST3.5×14 screw | 21 | 31 | Motor gear | ||
10 | 019.2x034x2 washer | 32 | 550 motor | |||
11 | 022.2x032x2 washer | 2 | 33 | Left drill housing | ||
12 | bushing | 34 | Driving lever | |||
13 | Right housing | 35 | Capacity showing transparent |
cover
|
14| Left housing| | | 36| Capacity showing plate|
15| ST3.9×30 screw| 4| | 37| 06x01Qx1Q magnetic tube|
16| Drum upper cover| | | 38| trigger|
17| 1/4″-20UNCx5 /8 screw| 3| | 39| 713-3 supporter|
18| 1/4 spring washer| 3| | 40| Battery pack|
19| M5x20 screw| | | 41| Right housing|
20| 05.5x020x2 flat
washer
| 2| | 42| buckle|
21| Alu. Pressure plate| | | | |
22| 0150×02 o-ring| | | | |
SERVICE
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE
IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER
AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE
BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF
HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Note: If product has no serial number, record month and year of purchase instead.