beurer HR 7000 Foil Shaver Instruction Manual

June 5, 2024
Beurer

HR 7000 Foil Shaver
Instruction Manual

Read these instructions for use carefully and keep them for later use, be sure to make them accessible to other users and observe the information they contain.
WARNING

  • The device is only intended for domestic/private use, not for commercial use.
  • This device may be used by children over the age of 8 and by people with reduced physical, sensory or mental skills or a lack of experience or knowledge, provided that they are supervised or have been instructed on how to use the device safely, and are fully aware of the consequent risks of use.
  • Children must not play with the device.
  • Cleaning and user maintenance must not be performed by children unless supervised.
  • The hand-held part must be disconnected from the connection cable before it is cleaned in water.
  • When using the device in the bathroom, unplug the plug after charging as water in the vicinity constitutes a danger, even when the device is switched off.
  • Never use the device with the mains adapter near baths, washbasins, showers or other objects containing water or other liquids ­ risk of electric shock!
  • The device may only be operated with the supplied mains adapter.
  • As an additional safety measure, we recommend the installation of a residual-current-operated protective device (RCD) with a rated operational current not exceeding 30 mm in the bathroom circuit. Your local electrical specialist can provide you with the relevant information.
  • If the mains connection cable of this device is damaged, it must be replaced by the manufacturer, its customer service department, or a similarly qualified person to avoid risks.
  • Under no circumstances should you open or repair the device yourself, as faultless functionality can no longer be guaranteed thereafter. Failure to adhere to this instruction will void the warranty.

Dear customer,
Thank you for choosing a product from our range. Our name stands for high- quality, thoroughly tested products for applications in the areas of heat, weight, blood pressure, body temperature, pulse, gentle therapy, massage, beauty, and air. Please read these instructions for use carefully and keep them for later use, be sure to make them accessible to other users and observe the information they contain.
With kind regards,
Your Beurer team

Included in delivery

Check that the device packaging has not been tampered with and make sure that all contents are present. Before use, ensure that there is no visible damage to the device or accessories and that all packaging material has been removed. If you have any doubts, do not use the device and contact your retailer or the specified Customer Services address.

  • 1 x HR 7000 foil shaver
  • 1 x protective cap/three-day stubble attachment
  • 1 x mains adapter
  • 1 x cleaning brush
  • 1 x storage bag

Signs and symbols

The following symbols are used in these instructions for use, on the packaging and on the type plate for the device:

WARNING Warning notice indicating a risk of injury or damage to health
CAUTION Safety note indicating possible damage to the device/accessory
Note Note on important information
Observe the instructions for use
Suitable for cleaning under running water
Disposal in accordance with the Waste Electrical and Electronic Equipment EC

Directive ­ WEEE
IPX6| Protection against strong water jets
IP20| Protected against solid foreign objects 12.5 mm in diameter and larger.
| Manufacturer
| This product satisfies the requirements of the applicable European and national directives
| Dispose of packaging in an environmentally friendly manner
VI| Energy efficiency class 6
| Only use the mains adapter indoors
| The adapter corresponds to device protection class II
| The polarity of the output terminal
| The products demonstrably meet the requirements of the Technical Regulations of the EAEU.
| Safety isolating transformer, short-circuit proo
| Switching mains part

Getting to know your device

With the HR 7000 foil shaver, you can trim or shave your beard with ease and precision. The foil shaver is suitable for wet and dry shaving. The foil shaver features a triple-blade shaving system, an extendable detail trimmer as well as Stork stainless steel shaving foils for maximum skin tolerance. The extendable detail trimmer allows you to achieve neat contours with ease. The foil shaver has an LED display with a charging and battery indicator (0-100%), as well as a travel lock indicator. The foil shaver can be powered via battery or using the mains adapter supplied. A high-performance lithium battery ensures that you can use the foil shaver for up to 60 minutes from just one battery charge. The shaver head can be disassembled and rinsed under running water for hygienic cleaning.

Intended use

The HR 7000 foil shaver is exclusively intended for shaving and cutting human facial hair. Do not use the foil shaver on other body parts, animals or objects! The foil shaver is intended for private use only. It is not intended for commercial use. The foil shaver may only be used for the purpose for which it was designed and in the manner specified in the instructions for use. Any improper use may be dangerous. The manufacturer is not liable for damage resulting from improper or careless use.

Warnings and safety notes

DANGER
To avoid damage to health, we strongly advise against using the device in the following situations:

  • The danger of suffocation by packaging material! Keep packaging material away from children.
  • Before use, inspect the device and accessories for visible damage. If you have any doubts, do not use the device and contact your retailer or the specified Customer Service address.
  • Keep the mains adapter away from water
  • Never submerge the device in water or other liquid! Risk of electric shock!
  • If the device should fall into the water while charging, despite following all safety precautions, immediately pull the mains adapter from the socket! Do not reach into the water! Risk of electric shock!
  • Has the device been checked by an authorized specialist workshop before using it again? Danger to life due to electric shock!
  • If the device has been dropped or has suffered any other damage, it must no longer be used. Risk of electric shock and injury!
  • If there is visible damage to the device or the mains cable/plug. If you have any doubts, do not use the device and contact your retailer or the specified Customer Service address. Risk of electric shock!
  • Do not use the device if the shaver heads are damaged as they may have sharp edges ­ risk of injury!
  • Children must not play with the device.
  • Do not use extension cables in the bathroom to ensure the mains adapter can be accessed quickly in an emergency.
  • Never use the device with wet or damp hands when it is connected to the power supply.

WARNING
To avoid damage to health, please note the following :

  • Ensure that no highly flammable liquids are located near the device. Risk of fire!
  • Do not use the device if you have sunburn, open wounds, eczema or cuts on your face.
  • Remove all packaging material before using the device.
  • Ensure that the mains cable does not pose a trip hazard.
  • Only connect the device to a socket that has the correct voltage as indicated on the type plate.
  • Only operate the device according to the specifications on the type plate.
  • Only pull on the mains adapter to remove the mains cable from the socket.
  • Under no circumstances should you open or repair the device yourself, as faultless functionality can no longer be guaranteed thereafter. Failure to comply with this instruction will void the warranty.
  • In the event of a fault or damage, have the device repaired by a certified specialist workshop.
  • Never leave the device unattended while in use.
  • Do not use the device outside.
  • If you pass on the device to someone else, make sure to also pass on these instructions for use.
  • Switch off the device after every use.
  • Pull the mains adapter out of the socket after each completed charging process.

CAUTION

  •  Protect the device and its accessories from impacts, humidity, dirt, marked temperature fluctuations, and direct sunlight.
  • Only operate, charge or store the device at temperatures from -10°C to 40°C.

Notes on handling batteries:

  • If your skin or eyes come into contact with fluid from the battery cell, flush out the affected areas with plenty of water and seek medical assistance.
  • Risk of explosion! Never throw batteries into a fire.
  • Do not disassemble, split or crush the batteries.
  • Only use chargers specified in the instructions for use.
  • Batteries must be charged correctly prior to use. The instructions from the manufacturer and the specifications in these instructions for use regarding correct charging must be observed at all times.
  • Fully charge the battery prior to initial use (see Chapter “7. Initial use”).
  • In order to achieve as long a battery service life as possible, fully charge the battery at least 2 times a year.

Device description

  1. Shaving foil
  2. Long hair cutter
  3. Shaving foil release buttons
  4. Triple-blade shaving system
  5. ON/OFF switch
  6. Battery indicator (0-100%)
  7. Travel lock indicator
  8. Charge indicator
  9. Maintenance indicator
  10. Connection socket
  11. Detail trimmer
  12. Shaver unit release buttons
  13. Cleaning brush
  14. Protective cap/three-day stubble attachment
  15. Mains adapter
  16. Storage bag

Initial use

You can operate the device using the battery or the mains adapter supplied.
Charging the battery You must fully charge the battery for approx. 90 minutes before the first use. The operating period of the device is approx. 60 minutes when it is fully charged.
To charge the battery, proceed as follows:

  1. Ensure that the device is switched off before charging the battery.
  2. Connect the mains adapter to a suitable socket.
  3. Plug the other end of the mains adapter into the connection socket on the underside of the device. The charge indicator will now flash in the display and the charging status indicator lights up white. The charging process will be displayed by the flashing charging status indicator and the illuminated charge indicator. If the battery is fully charged, the charging status indicator lights up continuously. You can see the precise battery charge level from the battery indicator.
  4. Once the charging process is complete, pull the main adapter out of the socket and the device.

Quick charging

If you have forgotten to charge the foil shaver before use, the quick-charge function can help. Connect the device to the power supply. The device will be ready for a complete shave using battery operation within 5 minutes.
Mains operation To operate the device with the supplied mains adapter, proceed as follows:

  1. Connect the mains adapter to a suitable socket.
  2. Plug the other end of the main adapter into the connection socket on the underside of the device. The battery indicator shows you the current battery state in percent and the charge indicator begins to flash. The main adapter supplies enough energy to charge the battery and operate the device at the same time.
  3. After use, pull the mains adapter from the socket and the device.

WARNING
Never use the device in the shower when it is being operated via the mains. The hand-held part of the device must be disconnected from the connection cable before use in a damp environment.

Usage

Travel lock The device has a travel lock. If the travel lock is activated, it is not possible to switch on the device. The travel lock prevents the device from switching on by accident (e.g. when transporting it in a suitcase).
To activate the travel lock, press and hold the ON/OFF switch The travel lock indicator lights up for 3 seconds.
If the ON/OFF switch is briefly pressed when the device is locked, the travel lock symbol will light up in the display to indicate that the device is locked.
To deactivate the travel lock, press and hold the ON/OFF switch ** for 3 seconds again.
Direct drive function If the battery is completely flat, you can continue using the device immediately via mains operation.
Tips for shaving/trimming**

  • Clean your face before shaving to remove any dirt or grease from the skin. This will reduce skin irritation and make the shave feel more pleasant.
  • Apply light pressure to keep skin irritation to a minimum.
  • Shave the most awkward areas first, such as under the nose and along the jawline. This is because the shaving foil is still cool at the start of the shave. If you need to shave over these awkward areas multiple times towards the end of your shave, the shaving foil may have warmed up and this can feel unpleasant.
  • Try to stretch the skin being shaved using your fingers.
  • The shorter the beard hair is, the more effectively the foil shaver will shave.
  • If you switch from wet to dry shaving (or vice versa), it may take up to 3 weeks for your skin to get used to the new method.

Shaving
Before you start shaving, make sure that the foil shaver is charged (see Section “7. Initial use”).

  1. Ensure that the triple-blade shaving system is properly attached.
  2. Remove the protective cap/three-day stubble attachment if it is still attached.
  3. Press the ON/OFF switch to switch on the foil shaver. The charging status indicator and battery indicator begin to light up. The battery indicator shows you the remaining battery life in percent.
  4.  Apply light pressure as you move the shaving foil across the areas of the face to be shaved.
  5. When you have shaved all the required areas of your face, switch the foil shaver off. Press the ON/OFF switch to switch off the foil shaver.
  6. Clean the shaving foil after every shave using the cleaning brush provided. For thorough cleaning, read section “9. Cleaning and maintenance”.

Protective cap/three-day stubble attachment
NOTE
Depending on the growth rate of the beard and the shave, three-day stubble can look very different.
To give the appearance of three-day stubble, regularly dry shave with the protective cap/three-day stubble attachment attached. The protective cap /three-day stubble attachment serves as a three-day stubble attachment in this scenario.
Detail trimmer
The foil shaver has an integrated detail trimmer to help you shave or trim neat contours. To use it, proceed as follows:

  1. Slide the detail trimmer completely upwards as shown.
  2. Press the ON/OFF switch to switch on the foil shaver.
  3. Start to shave or trim neat contours using the detail trimmer.
  4. When you have finished shaving or trimming your contours, switch the foil shaver off. Press the ON/OFF switch to switch off the foil shaver.
  5. Clean the detail trimmer after every shave using the cleaning brush provided.

Cleaning and maintenance

Cleaning the device
WARNING

  • Always pull the main adapter out of the socket before cleaning the device. Risk of electric shock!

  • Only clean the housing of the device with a soft cloth dampened with warm water or the cleaning brush supplied.

  • Do not clean the device with highly flammable liquids. Risk of fire!

  • Do not clean the device in the dishwasher.

  • Remove any residual hair from the device after each use.
    Use the cleaning brush provided for this task.

  • Do not use any aggressive, caustic, abrasive or corrosive cleaning products or hard brushes.

Cleaning the triple-blade shaving system under running water Clean the device regularly, at the latest once the maintenance indicator symbol (see chapter 6 on device description) lights up in the display. To clean the triple-blade shaving system particularly thoroughly, you can also rinse it under running water. To do so, proceed as follows:

  1. Press the shaver unit release buttons on the sides.

  2. Pull the triple-blade shaving system from the device in an upward direction.

  3. Press the shaving foil release buttons on the sides.

  4. Pull the shaving foil upwards to remove it from the device

  5. Hold the triple-blade shaving system under running water so that the jet of water runs through the shaving foil from the outside in.

  6. Once the triple-blade shaving system is completely dry, first place the shaving foil on the triple-blade shaving system and then place the triple-blade shaving system on the foil shaver as pictured, until you feel and hear it click into place. During reassembly, ensure that the little recess of the triple-blade shaving system is located above the detail trimmer.

Accessories and replacement parts

To purchase accessories and replacement parts, please visit www.beurer.com or contact the corresponding service address (according to the service address list) in your country. Accessories and replacement parts are also available from retailers.

Designation Item number and/or order number
Shaving head unit (2 x shaving foils & 2 x cutting blocks) 580.19

Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its useful life. Dispose of the device at a suitable local collection or recycling point in your country. Dispose of the device in accordance with EC Directive ­ WEEE (Waste Electrical and Electronic Equipment). If you have any questions, please contact the local authorities responsible for waste disposal.
WARNING
The integrated battery cannot be removed for disposal. Risk of explosion and injury. The lithium-ion battery used in this device must not be disposed of in household waste but must be disposed of correctly. For information on disposal, please contact the authorized seller or a municipal collection point. During disposal, it must be pointed out that the device contains a battery.
Discharge the battery before disposal. Take the device and switch the foil shaver on until the battery is flat.
NOTE
If it is not possible to discharge the battery due to a fault or damage, please consult your waste collection point.

Technical specifications

Model HR 7000
Weight 145 g
Device dimensions 14.5 x 6.5 x 3.9 cm
Device protection type IPX6
Device input Input: 5 V 1 A
Adapter protection type IP20
Adapter protection class II
Voltage supply (RY-050100BS-B) Input: 100-240 V-, 50/60 Hz, 0.2 A Output: 5.0

V 1.0 A, 5.0 W
Average active efficiency| z 75.46 %
No-load power consumption| s 0.082 W
Battery:| 700 mAh
3.7 V
Lithium-ion
Capacity
Nominal voltage Type designation

 Warranty/service

Beurer GmbH, Söflinger Straße 218, 89077 Ulm, Germany (hereinafter referred to as “Beurer”) provides a warranty for this product, subject to the requirements below and to the extent described as follows.
The warranty conditions below shall not affect the seller’s statutory warranty obligations which ensue from the sales agreement with the buyer. The warranty shall apply without prejudice to any mandatory statutory provisions on liability.
Beurer guarantees the perfect functionality and completeness of this product.
The worldwide warranty period is 3 years, commencing from the purchase of the new, unused product from the seller.
The warranty only applies to products purchased by the buyer as a consumer and used exclusively for personal purposes in the context of domestic use. German law shall apply.
During the warranty period, should this product prove to be incomplete or defective in functionality in accordance with the following provisions, Beurer shall carry out a repair or a replacement delivery free of charge, in accordance with these warranty conditions.
If the buyer wishes to make a warranty claim, they should approach their local retailer in the first instance: see the attached “International Service” list of service addresses.
The buyer will then receive further information about the processing of the warranty claim, e.g. where they can send the product and what documentation is required.
A warranty claim shall only be considered if the buyer can provide Beurer, or an authorized Beurer partner, with
– a copy of the invoice/purchase receipt, and
– the original product.
The following are explicitly excluded from this warranty:
– deterioration due to normal use or consumption of the product;
– accessories supplied with this product that are worn out or used up through proper use (e.g. batteries, rechargeable
batteries, cuffs, seals, electrodes, light sources, attachments, and nebulizer accessories);
– products that are used, cleaned, stored, or maintained improperly and/or contrary to the provisions of the instructions
for use, as well as products that have been opened, repaired or modified by the buyer or by a service center not authorized by Beurer;
– damage that arises during transport between manufacturer and customer, or between the service center and customer;
– products purchased as seconds or as used goods;
– consequential damage arising from a fault in this product (however, in this case, claims may exist arising from product liability or other compulsory statutory liability provisions).
Repairs or exchanges in full do not extend the warranty period under any circumstances.

https://www.beurer.com/verwaltung/redirect.php?hash=236601564041056

Beurer GmbH
Söflinger Straße 218
89077 Ulm, Germany
www.beurer.com
www.beurer-gesundheitsratgeber.com
www.beurer-healthguide.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals