beurer HT 22 Split Ender Instruction Manual

: May 15, 2024
: Beurer

Table of Contents

beurer HT 22 Split Ender
Product Usage Instructions
FAQ
Included in delivery
IMPORTANT SAFETY NOTES
SIGNS AND SYMBOLS
DEVICE DESCRIPTION
USING THE DEVICE
CLEANING AND MAINTENANCE
DISPOSAL
TECHNICAL DATA
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

beurer HT 22 Split Ender

beurer-HT-22-Split-Ender-PRODUCT

Specifications

Dimensions: 25.6 x 4.1 x 4.4 cm
Weight: 261 g
Device Input: 5.0 V 1.0 A
Battery: 1800 mAh 3.7 V Li-Ion

Product Usage Instructions

Important Safety Notes Ensure to read and observe all safety warnings and notes provided in the manual. Keep the device away from water-filled containers and out of reach of children unless supervised.

Signs and Symbols Refer to the symbols used on the device, packaging, and type plate for guidance.

Device Description The device features a display, ON/OFF button, plate locking system, cutting chamber, collection tray, and charging socket.

Using the Device Charging the Battery: Charge the device using a mains adapter with an output of 1 A for a minimum of 2 hours before the first use.

Using the Device: Comb your hair with a large-toothed comb before using the device to remove any tangles.

Cleaning and Maintenance Warning: Switch off the device before cleaning.
Do not reach into the cutting chamber while the device is on.

Slide off the collection tray and clean it along with the cutting chamber using the provided cleaning brush after each use.
Clean the device housing with a soft cloth dampened with warm water.
Avoid aggressive cleaning products or hard brushes, and do not clean in a dishwasher.

Disposal Follow local regulations for proper disposal of the device when no longer in use.

FAQ

Q: Can children use this device? A: Children should not use this device unsupervised.

Q: How should I clean the device? A: Use a damp cloth for the housing and the provided cleaning brush for the cutting chamber and collection tray.

Q: How should I charge the device? A: Charge the device with a mains adapter that has an output of 1 A for a minimum of 2 hours before initial use.

Unfold page 3 before reading the instructions for use.

Read these instructions for use carefully. Observe the warnings and safety notes. Keep these instructions for use for future reference.
Make the instructions for use accessible to
other users. If the device is passed on, pro-
vide the instructions for use to the next user
as well.

Included in delivery

Check that the exterior of the cardboard delivery packaging is intact and make sure that all contents are present. Before use, ensure that there is no visible damage to the device or accessories and that all packaging material has been removed. If you have any doubts, do not use the device and contact your retailer or the speciﬁed Customer Services address.

1 x Split End Trimmer
1 x Cleaning brush
1 x USB charging cable

IMPORTANT SAFETY NOTES

The device must only be used for the purpose for which it was designed and in the manner speciﬁed in the instruc-tions for use.
This device may be used by children over the age of 8 and by people with reduced physical, sensory or mental skills, or a lack of experience and/or knowl-edge, provided that they are supervised or have been instructed on how to use the device safely, and have understood the risks involved.
Children must not play with the device.
Danger of suffocation! Keep packaging materials away from children.
Cleaning and user maintenance must not be performed by children unless supervised.
Do not use this appliance near bathtubs, shower trays or other containers that have water in them.
This device is not designed for use in commercial areas.
Risk of electric shock! Ensure that no water gets inside the device!

Notes on handling batteries

If your skin or eyes come into contact with ﬂuid from a battery cell, wash the affected areas with water and seek medical assistance.
Protect batteries from excessive heat.
Risk of explosion! Never throw batteries into a ﬁre.
Do not disassemble, split or crush the batteries.
Batteries must be charged correctly prior to use. The instructions from the manufacturer and the speciﬁ-cations regarding correct charging in these instruc-tions for use must be observed at all times.
Fully charge the battery prior to initial use.
In order to achieve as long a battery service life as possible, fully charge the battery at least 2 times a year.

SIGNS AND SYMBOLS

The following symbols are used on the device, in these in-structions for use, on the packaging and on the device’s type plate:

beurer-HT-22-Split-Ender-FIG-3 beurer-HT-22
-Split-Ender-FIG-4

DEVICE DESCRIPTION

The corresponding drawings are shown on page 3.

Display
ON/OFF button
Plate locking system
Cutting chamber
Collection tray
Charging socket

beurer-HT-22-Split-Ender-FIG-1

USING THE DEVICE

Charging the battery
The device should only be charged with a mains adapter with an output of 1 A.
Before using the device for the ﬁrst time, you must charge it for a minimum of 2 hours.

Connect the device using the supplied charging cable and a compatible USB connection (mains adapter not included in delivery) (see Figure A ).
During charging, the battery symbol in display 1 is displayed in red. Once the device is fully charged, the battery symbol turns green.
Remove the charging cable from the device. The device is now ready for use.

Direct drive function
If the battery is completely ﬂat, you can continue using the device immediately via mains operation.

Travel lock
The device has a travel lock. If the travel lock is activated, it is not possible to switch on the device. The travel lock prevents the device from switching on unintentionally (e.g. when being carried in a suitcase).

To activate the travel lock, press and hold the ON/OFF button 2 for 3 seconds. A red suitcase symbol ﬂashes on the display 1 . The device is now locked. If you press the ON/OFF button 2 while the travel lock is activated, the red suitcase symbol ﬂashes brieﬂy.
To deactivate the travel lock, press and hold the ON/OFF button 2 again for 3 seconds. The device switches on and is now unlocked.

Using the device

Comb your hair with a large-toothed comb to get rid of any tangles. Your hair should be clean, dry and free from styling products.
Slide the plate locking system 3 down to unlock the device (see Figure B ). Make sure that the collection tray 5 is inserted.
Switch on the device using the ON/OFF button 2 . Use the ON/OFF button 2 to select the correct direction of use. The correct direction of use depends on which hand you are using or which side of your head you are using the device on.
The green arrows in the display 1 should point towards the floor during use.
Part the hair into individual sections that are approximately 2 to 3 cm wide.
Hold a section taut and place it between the plates near the roots (see Figure C ).
Slowly move the device from the roots to the tips in a fluid motion (see Figure D ). Dry and broken hair tips are cut off and land in the collection tray 5 .
To switch off the device, press the ON/OFF button 2 until the green arrows disappear from the display.
Press the two plates together and slide the plate locking system 3 upwards.

CLEANING AND MAINTENANCE

WARNING
Risk of injury/crushing! Switch off the device before removing the collection tray 5 from the device. Do not reach into the cutting chamber from behind while the device is switched on!

Slide the collection tray 5 on. Clean the collection tray 5 and cutting chamber 4 with the cleaning brush after each use.
The device housing can be cleaned with a soft cloth dampened with warm water.
Your device is maintenance-free.
Protect the device from dust, dirt and humidity.
Do not clean the device in the dishwasher.
Do not use any aggressive, caustic, abrasive or corrosive cleaning products or hard brushes!

DISPOSAL

WARNING

The integrated battery cannot be removed for disposal. Risk of explosion and injury. The lithium-ion battery used in this device must not be disposed of in household waste, but must be disposed of correctly. For information on disposal, please contact the authorised seller or a municipal collection point. When disposing of the device, you must point out that it contains a battery. Discharge the battery before disposal. Take the device and switch it on until the battery is ﬂat.
For environmental reasons, do not dispose of the device in household waste at the end of its service life. Dispose of the device at a suitable local collection or recycling point in your country. Observe the local regulations for material disposal. Dispose of the device in ac-cordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment).
If you have any questions, please contact the local authorities responsible for waste disposal.
You can obtain the location of collection points for old devices from the local or municipal authorities, local waste disposal company or your dealer, for example.

TECHNICAL DATA

Dimensions 25.6 x 4.1 x 4.4 cm
Weight 261 g
Device input 5.0 V 1.0 A
Ambient conditions Only approved for indoor use
Battery:
Capacity: 1800 mAh
Nominal voltage: 3.7 V
Type designation: Lithium-ion

Subject to technical changes.
The Declaration of Conformity for this product can be found
at the following address:
https://www.beurer.com/web/we-landingpages/de/cedeclarationofconformity.php