Lupine Lighting Systems C14 E-Bike Rear with Brake Light Instructions
- June 12, 2024
- LUPINE LIGHTING SYSTEMS
Table of Contents
Lupine Lighting Systems C14 E-Bike Rear with Brake Light
Product Information
- Product Name: C14 BL
- Manufacturer: Lupine Lighting Systems GmbH
- Address: Im Zwiesel 9, D – 92318 Neumarkt, Germany
- Languages: DE / EN
Assembly
- Remove saddle clamp / seat post
- Position the C14 on the seat tube
- Attach the seat tube again
- Adjust the C14 and mount it with 5 – 7Nm Max. (hex key size 4)
- Install the cable along the frame to the drive unit, using the enclosed cable guides.
Note: Pay attention to the polarity (red +, black -)
Operation:
You can turn the light on and off manually by pushing the button at the light.
Brake sensor
- A sensor built into the rear light reacts with a brief signal to sudden braking.
- (Hereafter referred to as the brake sensor) Afterwards it switches back to the original light level.
- By default the brake sensor is activated.
- To change this setting the C14 must be switched on.
- Keep the button pressed (aprox. 8 sec.) until the C14 lights up once, let button go immediately.
- The brake sensor is now deactivated or activated.
Lupine Lighting Systems GmbH
Im Zwiesel 9
D – 92318 Neumarkt
Germany
Mehr Informationen unter www.lupine.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>