ENERGY SISTEM ESG 2 Sonar Gaming Soundbar User Manual

: June 9, 2024
: ENERGY SISTEM

Table of Contents

ENERGY SISTEM ESG 2 Sonar Gaming Soundbar
Introduction
Care and maintenance
Features
Technical specifications
Product content
General overview
Main Functions
- Warranty
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ENERGY SISTEM ESG 2 Sonar Gaming Soundbar

Introduction

Thank you for trusting our company and buying the new Gaming Soundbar ESG 2 Sonar. We hope you enjoy the product.
Gaming soundbar with several RGB lighting effects, Bluetooth 5.0, 3.5 mm jack connector and 10 W of power to enjoy playing video games on your computer.
Before you start using your Gaming Soundbar ESG 2 Sonar, we strongly recommend reading this manual to get used to it.

Care and maintenance

Do not expose your Gaming Soundbar ESG 2 Sonar to impacts, dust, humidity or high temperatures.
Do not use neither corrosive nor abrasive cleaning products.
Do not disassemble the device. All repair works should be carried out exclusively by qualified staff of Energy Sistem Technology, S.A.
Make sure your Gaming Soundbar ESG 2 Sonar is off when you are not using it.

Features

2.0 gaming soundbar with 20 W of peak power to dive into your video games with the best sound quality.
RGB lights with several lighting effects to feel like you are part of the game.
It features a 3.5 mm jack connector and Bluetooth 5.0 to listen to your favourite music.
Broaden your gaming possibilities and enjoy crystal clear sound. TV and PC compatible.
Front headphones and microphone connector for single player mode. Enjoy an enhanced gaming experience.

Technical specifications

Audio

Stereo sound system
Power: 10 W
2 full range speakers: 2?, 5 W
Passive radiator: 1 front membrane
Frequency response: 50 Hz ~ 18 kHz
Signal/Noise ratio: > 90 dB

Bluetooth connectivity

Bluetooth 5.0, class 2
Frequency band: 2.4 GHz
Maximum output power: < 20.00 dBm
Compatible Bluetooth profiles: A2DP / AVRCP
Up to 20 m distance range

Audio inputs

3.5 mm audio-in (analogue stereo input)

Power requirements

DC power adapter: 5 V / 1.5 A
Device adapter: USB
Power cable length: 150 cm

Other features

Front RGB lights with several lighting effects
3.5 mm jack connector for headphones and microphone at the front
Plastic casing

Product content

Gaming Soundbar ESG 2 Sonar
USB Type-A to Type-C adapter
3.5 mm Y splitter cable (1 female to 2 male connectors)

General overview

$ENERGY SISTEM ESG 2 Sonar Gaming Soundbar $1$$

On/Off/Playback mode
Volume -/Light mode
Volume +/Colour
3.5 mm audio output
3.5 mm jack cable for audio input
USB power cable

Main Functions

Switching on and off the device Plug the USB power cable (6) into your PC or any other device with a 5 V charging connection. To switch on/off your Gaming Soundbar ESG 2 Sonar, press and hold On/Off/Playback mode (1) for 2 seconds.

Playback modes Once the Gaming Soundbar ESG 2 Sonar is on, you can choose the playback mode you prefer. There are two modes available: Bluetooth and Line-in. Press On/Off/Playback mode (1) repeatedly until finding the preferred playback mode. You will also hear the word identifying each mode.

Bluetooth (BT)

To pair your soundbar with a source device via Bluetooth, switch on the Gaming Soundbar ESG 2 Sonar and enable
Bluetooth mode. At this point the RGB lights start flashing blue, meaning the device is ready for Bluetooth pairing.

Access the Bluetooth settings on the source device and search for ?Energy Sistem GS ESG 2″ among the detected devices. Once selected, the devices will be connected immediately. You will hear a sound confirming both devices are correctly paired. The RGB lights will light up as usual.

Your Gaming Soundbar ESG 2 Sonar connects to the last paired device automatically when you switch it on once again,
provided that the Bluetooth connection on the source device is enabled.

IMPORTANT: The soundbar turns off automatically after 5 minutes if not paired with any device.

Auxiliary audio input (AUX) Make the most of your Gaming Soundbar ESG 2 Sonar using the 3.5 mm jack cable for audio input (5). The audio input allows you to connect an external device.

NOTE 1: Use the provided 3.5 mm Y splitter cable (1 female to 2 male connectors) to connect the soundbar to a PC
featuring two separate audio and microphone connections.
NOTE 2: It is not possible to control music playback from the soundbar while using this mode. You will have to use the connected music player instead.
NOTE 3: We recommend using a 3.5 mm jack to USB Type-C adapter to connect the soundbar to a smartphone featuring a USB-C connection.

Audio output The Gaming Soundbar ESG 2 Sonar has a 3.5 mm audio output (4) on the front to connect your headset.

NOTE: If your headset features two separate audio and microphone connectors, you will need a Y splitter cable (2 female to 1 male connector).

Playback control Select a playback mode and you will be able to control all playback functions from your Gaming Soundbar ESG 2 Sonar.
Press Volume -/Light mode (2) or Volume +/Colour (3) to adjust the volume according to your preferences. Press On/Off/Playback mode (1) to play or pause a song.

Important: Bear in mind that you can only control playback from the connected music player while using AUX mode (audio-in).

Light modes Your Gaming Soundbar ESG 2 Sonar features RGB lighting effects in different colours. Press and hold Volume -/Light mode (2) for 2 seconds to switch between the different lighting effects of your Gaming Soundbar ESG 2 Sonar. You can choose the colour of each effect. To do so, press and hold the Volume +/Colour (3) for 2 seconds.

For a better understanding of the lighting effects and colours, please refer to the image below:

$ENERGY SISTEM ESG 2 Sonar Gaming Soundbar $2$$

Warranty

You can check the warranty terms here Declaration of conformity Issuer’s name: Energy Sistem Technology, S.A. – CIF: A53107488 Address: C/ Calpe, 1 – 03509 Finestrat, Alicante (Spain) Tel: +34 966 830 324 We declare under our sole and exclusive responsibility that the product:

Description: gaming soundbar