EDIFIER W200T Mini True Wireless Earbuds Headphones User Manual
- June 5, 2024
- Edifier
Table of Contents
EDIFIER W200T Mini True Wireless Earbuds Headphones User Manual
Power ON/OFF
- Power ON when taken out of the case.
- Power OFF when placed in the case.
Pairing
- Power ON when taken out of case.
- Press and hold the touch panel on either earbud for 3s. White and green LED will blink rapidly.
- Select either “EDIFIER W200T mini R” or “EDIFIER W200T mini L” in your device setting to connect.
1st Pairing
- Power ON when taken out of case. White and green LED will blink rapidly.
- Select either “EDIFIER W200T mini R” or “EDIFIER W200T mini L” in your device setting to connect.
Note: For subsequent use, the earbuds will auto-connect to device used last time.
Reset
- Power ON when taken out of the case.
- Earbuds must disconnect to any devices.
- Press and hold the touch panel on both earbuds respectively for 8s to reset.
Note: Left and right earbud must be done Reset separately.
Left & Right connection
- Power on when taken out of the case.
- Earbuds must disconnect to any devices.
- Tap the touch panel 2 times until the green LED blink rapidly to enter left & right earbuds connection.
- After the earbuds are connected, the green LED will blink 2 times every 5s.
- Enter pairing mode.
Controls
For more information, please visit our website:
http://www.edifier.com/
Model: EDF200061
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
© 2021 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade, information
contained herein may be subject to change from time to time without prior
notice.
Products of EDIFIER will be customized for different applications. Pictures
and illustrations shown on this manual may be slightly different from actual
product. If any difference is found, the actual product prevails.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>