OMCAN JE-CN-0020 Orange Juicer Instruction Manual

Orange Juicer
Model JE-CN-0020 Item 44228
Instruction Manual

Revised – 08/13/2021

Toll-Free: 1-800-465-0234
Fax: 905-607-0234
Email: service@omcan.com
www.omcan.com

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and not under the influence of any drugs or alcohol, who has been trained in the correct operation of this machine and is wearing authorized proper safety clothing. Any modification to the machine voids any warranty and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open the carton to ensure all ordered items are within the box, and there is no concealed damage to the machine. If the package has suffered rough handling, bumps, or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operations and safety instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save these instructions for future reference. Also, save the original box and packaging for shipping the equipment if servicing or returning the machine is required.

Safety and Warranty

RESIDENTIAL USERS: The vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.
1 YEAR PARTS AND LABOUR BENCH WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop-off to either Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the equipment.
Unauthorized maintenance will void the warranty. The warranty covers electrical and part failures, not improper use.
Please see https://omcan.com/disclaimer for complete info.

WARNING:
The packaging components are classified as normal solid urban waste and can therefore be disposed of without difficulty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Technical Specifications

Operation

BEFORE OPERATION

1. The power supply must be safely grounded, and the machine connection parts shall only be changed by qualified individuals.
2. Check whether all parts are installed properly. This product is equipped with a safety system, only after the machine cover is correctly installed, it can work, the machine will not start otherwise.
3. Before using it for the first time, please clean the unit thoroughly, taking extra care when cleaning the parts that come into contact with food.

OPERATION PROCESS

1. Put a glass or a desired container on the tray below the dispenser.
2. Put the fruit peel buckets under the two ejector slots on the sides of the unit.
3. Fill the top basket with the desired amount of cleaned oranges.
4. Plugin the machine and it will be ready to work.
5. Pressing the start switch can feed the oranges continuously into the feeding port, once one orange has been squeezed the skin will be discarded into each peel basket automatically.
6. When the machine is operating, it is important to note that you must never insert your hands and fingers into the feeding port. If the juice storage container or the fruit peel bucket is filled up, switch off the power supply and then clean it.
7. After the operation of this machine is completed, turn off the unit and disconnect from the power supply.

Maintenance

MAINTENANCE AND CLEANING

1. Before cleaning the product, the unit must be switched off, ensure to unplug the machine from the power source, and always wait until the machine stops completely.
2. Clean the unit immediately after use.
3. The outer main body can be wiped with a damp cloth, do not wash the machine with water directly, remove the parts that come into contact with the oranges, and wash thoroughly.
4. Refer to the following steps on how to disassemble the parts to clean:
   – Unscrew the cover screw, and remove the cover.

– Pull out the knife combination (being extra careful around the blade).

– Remove the two groups of scraper combinations by unscrewing the four screws and sliding them out as shown below.– Remove the two groups of concave and convex balls (each group of the concave and convex balls needs to be removed at the same time).

– After the cleaning of the unit is completed, re-install each part by following the previous instructions in the reverse order.

REPLACING THE GEARS

1. Remove the damaged cylindrical gear and the connected parts according to the assembly sequence.
2. Use two square hole templates to lock the upper two of four corner angle shaft parallels, and then install two big cylindrical gears.
3. Remove the two square hole templates.
4. Use one square and a triangle template to lock the left (or right) upper four corner angle shaft and lower triangular shaft under the ridge axis, and then install the small cylindrical gear.
5. The installation method of the other side of the small cylindrical gear is the same as part 4.

Troubleshooting

switch is in good condition.
Check whether the safety switch is in a closed state.
The starting switch does not wort| Check whether the starting switch is in good condition.
Check whether the starting switch socket end is plugged.
The motor does not work.| Check whether the socket at the two sides of the power line is tightened.
Check whether the fuse is in good condition.
Check whether the terminal in the motor switch box is a solid connection.
Mechanical failure.| The motor output shaft end bevel gear wheel transmission mesh.| Check whether the size of the bevel gear wheel is damaged.
---|---|---
Check whether the meshing positions of the big and small bevel gears wheel are correct. the adjustable small bevel gears wheel is rising to the correct fishing position and tightens the hex screws on the gear (when the small bevel gear wheel on the motor shaft position is moved down).
The damage to transmission cylindrical gear.| The size of transmission cylindrical gear is divided into a pair of large cylindrical gear (Z = 52), and a
pair of small cylindrical gear (Z = 39).
Iron gear is generally tooth form damage.
If the cylindrical gear transmission has abnormal sound. it can be judged that the cylindrical gear is damaged, in the initial stage of the gear damage, the machine work must be stopped immediately, and the damaged gear must be replaced. otherwise, it will affect the relative position of the working parts of the machine, thus aggravating the damage of the gear and damage to the electrical machine and the working surface of the concave and convex balls.

Parts Breakdown

Model JE-CN-0020 44228

Model JE-CN-0020 44228

Electrical Schematics

Model JE-CN-0020 44228

Warranty Registration

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send it to the address specified below. You can also register online by visiting:

https://omcan.com/Warranty-registration/

For mailing in Canada

OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5

For mailing in the US

OMCAN
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
USA, 14305

or email to: service@omcan.com

Purchaser’s Information
Name:——————–
Company Name:——————–
Address:——————–
Telephone:——————–
City:——————–
Province or State:——————–
Postal or Zip:——————–
Email Address:——————–
Country:——————–
Type of Company:——————–
Restaurant——————–
Bakery——————–
Deli——————–
The dealer from which Purchased:——————–
Butcher——————–
Supermarket——————–
Caterer——————–
Dealer City:——————–
Dealer Province or State:——————–
Institution (specify):——————–
Invoice:——————–
Other (specify):——————–
Model Name:——————–
Model Number:——————–
Serial Number:——————–
Machine Description:——————–
Date of Purchase (MM/DD/YYYY):——————–
Date of Installation (MM/DD/YYYY):——————–
Would you like to extend the warranty? Yes- No

Thank you for choosing Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American foodservice industry. Our success over these many years can be attributed to our commitment to strengthening and developing new and existing relationships with our valued customers and manufacturers.
Today with partners in North America, Europe, Asia, and South America, we continually work to improve and grow the company. We strive to offer customers exceptional value through our qualified local sales and service representatives who provide convenient access to over 5,000 globally sourced products.

http://www.omcan.com

References

• Omcan
• Disclaimer – Omcan
• Warranty Registration – Omcan

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>