mestic MSFL-100 Solar Panel Flexible Instruction Manual

mestic MSFL-100 Solar Panel Flexible

Specifications

• Model: MSFL-100 / MSFL-150 / MSFL-200
• Maximum Power (Pmax):
  • MSFL-100: 100W
  • MSFL-150: 150W
  • MSFL-200: 200W
• Voltage at Pmax (Vmpp):
  • MSFL-100: 19.5V
  • MSFL-150: 19.5V
  • MSFL-200: 20V
• Current at Pmax (Impp):
  • MSFL-100: 5.13A
  • MSFL-150: 7.69A
  • MSFL-200: 10.1A
• Open-circuit Voltage (Voc):
  • MSFL-100: 23.4V
  • MSFL-150: 23.4V
  • MSFL-200: 24V
• Short-circuit Current (Isc):
  • MSFL-100: 5.54A
  • MSFL-150: 8.37A
  • MSFL-200: 10.3A
• Cell Type: Monocrystalline PERC

Product Usage Instructions

General Instructions

Before using this appliance, read the operating instructions carefully. Keep the manual for future use.

Safety Instructions

1. Do not step, jump, or stand on any part of the panel to avoid damaging the cells.
2. Avoid disassembling the panel.
3. Keep all electrical contact points clean and dry.
4. Avoid drilling or welding on the frame whenever possible.
5. Avoid using sharp metal tools or objects that may scratch the panel surface.

Installation Methods

1. Connect the solar panel to the battery system via a charge controller following the controller’s instructions.
2. Parallel Connection: Connect two panels in a 12 V system by connecting the positive to positive and negative to negative.
3. Series Connection: Connect two panels in a 24 V system by connecting the positive of one panel to the negative of the next panel.

Maintenance

1. Clean the module surface with a soft cloth, mild detergent, and water if necessary.
2. Regularly inspect electrical connections to ensure they are clean, safe, and undamaged.

Compliance Statement

Gimeg Nederland BV declares that the MSFL-100/-150/-200 device complies with basic requirements and relevant regulations mentioned in the European Directive for Electromagnetic Compatibility (2014/30/EU) and Low Voltage Directive (2014/35/EU).

Frequently Asked Questions

Q: Can I connect multiple panels in series?

A: Yes, you can connect two panels in a 24 V system by linking them in series.

Q: How should I clean the solar panel?

A: Clean the panel surface with a soft cloth, mild detergent, and water as needed.

Q: What type of cell does the solar panel use?

A: The solar panel uses Monocrystalline PERC cells.

Solar panel Flexible MSFL-100/-150/-200

PRODUCT OVERVIEW

Technical specifications

General instructions
Before using this appliance, read the operating instructions carefully.
Keep the manual for future use.

General assembly instructions

Note: as soon as the solar panel is exposed to light or sunlight, the terminals in the junction box are energised. To avoid short circuits when mounting and connecting the solar panels, you can turn the panels away from the light or cover them so that they do not produce electricity during the assembly process. Remove the cover when the connection is complete.

Note: The solar panels positive and negative cables should be disconnected before installation.

1. Do not step, stand or jump on any part of the panel. Uneven pressure may damage the cells.
2. Never try to disassemble the panel.
3. Keep all electrical contacts clean and dry.
4. Avoid drilling or welding in the frame wherever possible.
5. Do not use sharp metal tools or other objects that may scratch the surface of the panel.
6. Do not carelessly bend, shake, fold or drop the panel.
7. Use insulated tools suitable for electrical installation.
8. Choose a location for the panel with as little shade as possible. Keep in mind that if the solar panel is shaded, the power output will decrease.
9. Always connect the battery to the charge controller before connecting the solar module.
10. Check the system regularly to make sure it is functioning normally.
11. Photovoltaic systems must only be installed by qualified personnel.

Installation methods

1. The provided installation methods serve as guidelines. Mestic only provides certain installation accessories, but does not supply components for a comprehensive vehicle system installation. System installers should verify that the installation is safe and complies with all panel specifications.
2. The panel can be fastened through the holes in its edges, or by gluing with appropriate mounting UV and water resistant sealant, glue or double-sided tape on the back of the panel.
3. A solar panel must be connected to a battery system via a charge controller. For correct installation, follow the instructions supplied with the controller.

Series and parallel connection

If more than one panel is used, they can be connected either in series or in parallel.

Parallel:
To connect 2 solar panels in a 12 V system, connect the panels in parallel by connecting the plus to the plus and the minus to the minus.

Series:
To connect 2 solar panels in a 24 V system, connect the panels in series by connecting the plus of one panel to the minus of the next panel.

Maintenance

1. Generally, normal rainfall and wind are enough to keep the module clean. If necessary, you can clean the surface with a soft cloth with a mild detergent and 50% water.
2. Inspect electrical connections regularly, to make sure they are clean, secure and undamaged.

Recycling
This product bears the selective sorting symbol for waste electrical and electronic equipment This means that this product must be handled pursuant to European Directive (2012/19/EU) in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities. Electronic products not included in the selective sorting process are potentially dangerous for the environment and human heath due to the presence of hazardous substances.

Declaration of conformity
Hereby Gimeg Nederland B.V. declares that the device MSFL-100/-150/-200, applies all basic requirements and other relevant regulations listed in the European directive for electromagnetic compatibility (2014/30/EU) and low voltage directive (2014/35/EU). If you require a full declaration of conformity, you can contact the address listed on the backside of this manual.

Importer:
Gimeg Nederland B.V. Atoomweg 99, 3542 AA Utrecht The Netherlands

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>