OMCAN MX-CN-0037 Dough Mixers Instruction Manual

: June 5, 2024
: OMCAN

Table of Contents

OMCAN MX-CN-0037 Dough Mixers
General Information
Safety and Warranty
Technical Specifications
Operation
Maintenance
Troubleshooting
Parts Breakdown
Electrical Schematics
Warranty Registration
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OMCAN MX-CN-0037 Dough Mixers

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and not under the influence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modification to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.

CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save these instructions for future reference. Also save the original box and packaging for shipping the equipment if servicing or returning of the machine is required.

Safety and Warranty

ATTENTION

Repairing this product must be performed by qualified persons and those who are authorized by the manufacturer.
When installing or maintaining, please obey the following instructions carefully to ensure the safe use of this appliance.
Please keep this instruction manual for future reference.
Remove the packaging to make sure none of the parts are missing or damaged. If there is any doubt about the product, please do not use it, and contact the manufacturer.
Keep the packing material out of reach of children to avoid accidents (especially the plastic bag, screw etc).
This appliance can only be operated by a person who is competent with the unit.
When not using the appliance or the operator is absent, please turn off the unit to avoid any accidental injury or damage.
When it needs to be repaired, contact an authorized service agent, and only use the original fitted spare parts, otherwise a hazard may occur.
This appliance is for commercial use only. Do not use for any other purpose, otherwise it may cause a hazard.
Do not rinse the equipment with water spray.
Clean the surface of the stainless steel periodically and appropriately to prevent any damage brought by oxidization or any other chemical interference.

RESIDENTIAL USERS:
The vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

1 YEAR PART AND LABOUR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized service technician to repair the equipment locally. Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not improper use.Please see https://omcan.com/disclaimer for complete info.

WARNING:
The packaging components are classified as normal solid urban waste and can therefore be disposed of without difficulty. In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms.DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT

Technical Specifications

Model	MX-CN-0037	MX-CN-0043	MX-CN-0053
Power	1.1 – 1.5 HP	1.5 – 3 HP
Shaft Speed	101 / 202 RPM
Bowl Speed	8 / 16 RPM
Bowl Capacity	35 L / 37 QT	40.7 L / 43 QT	50 L / 53 QT
Bowl Dimensions (Dia. x H)	16.9” x 11.8”

430 x 300mm

| 18.9” x 13”

480 x 330mm

| 20.9” x 13”

530 x 330mm

770 x 429 x 810mm

| 34.3” x 18.9” x 36.8”

871 x 480 x 935mm

| 36.2” x 20.9” x 36.8”

919 x 531 x 935mm

Packaging Weight| 249 lbs. / 113 kgs.| 319.4 lbs. / 145 kgs.| 326 lbs. / 148 kgs.
Packaging Dimensions| 35” x 22” x 37”

889 x 559 x 940mm

| 37” x 23” x 41”

940 x 584 x 1041mm

| 39” x 24” x 40”

991 x 610 x 1016mm

Item Number| 19194| 19195| 19196

Operation

Place mixer on a dry stable location, and make certain that it is secure.
Before use, ensure that the power supply corresponds to that required by the machine and that the external ground wire is securely connected.
Ensure that flour mixing capacity is lower than the max. flour capacity.
Before starting, make sure that the safety protective guard has been lowered.
Do not put hands or hard objects into the bowl while in operation.

Maintenance

Continuous run times are not advised, allow the machine to rest periodically.
After each use, clean the machine, to avoid bacteria growth.
The transmission case is packed with special grease that will last for six months. To add or replace the grease, it is necessary to remove the upper cover. This should be done by an Omcan authorized provider.

Troubleshooting

Trouble	Probable cause	Remedy
The mixing shaft does not rotate after being turned on.	Electric connectors
are loose.	Check the electric circuit, tighten any loose connectors.
The square rod trembles.	The lock bolts are loose.	Tighten the bolts.

The temperature of the motor rises beyond normal, or it runs at a slower speed.| Lack of voltage.| Check the supply voltage.
Over loaded.| Remove some of the product.
The noise of the transmission case is loud.| Insufficient amount of lubrication.| Add or replace the grease.
The chains are loose.| Tighten the chains.
The agitator hits the bowl in operation.| The agitator or the bowl is deformed.| Repair or replace deformed part.

Parts Breakdown

Model MX-CN-0037 19194

Item No.| Description| Position| Item No.| Description| Position| Item No.| Description| Position
---|---|---|---|---|---|---|---|---
75463| Protective Casing for 19194| 1| 75475| Chain for Chain Pulley Z = 19 for 19194| 13| 75487| Locking Ring for 19194| 25
75464| Bowl for 19194| 2| 75476| Chain Pulley Z = 19 for 19194| 14| 75488| Transmission Shaft for 19194| 26
75465| Bowl Support for 19194| 3| 75477| Big Belt Pulley for 19194| 15| 75489| Motor for 19194| 27
75466| Chain Seat for 19194| 4| 75478| Washer for 19194| 16| 75490| Bearing Seat for 19194| 28
75467| Big Chain Pulley Z = 75 for 19194| 5| 75479| Washer for 19194| 17| 75491| Bottom Plate for 19194| 29
75468| Chain for 19194| 6| 75480| Washer for 19194| 18| 75492| Guiding Wheel for 19194| 30
75469| Frame for 19194| 7| 75481| Top Cover for 19194| 19| 75493| Rubber Foot for 19194| 31
75470| Dough Arm for 19194| 8| 75482| Belt for 19194| 20| 75494| Bottom Pulley Z = 19 for 19194| 32
75471| Shaft for 19194| 9| 75483| Small Belt Pulley for 19194| 21| 75495| Tension Pulley Z = 19 for 19194| 33
75472| Protective Plate for 19194| 10| 75484| Motor Fixed Plate for 19194| 22| 27948| Push-Lock Turn-Reset Switch for 19194
75473| Center Rod for 19194| 11| 75485| Back Cover for 19194| 23| 27945| Micro Computer Controller for 19194|
75474

__

Mod

__

Item No.

76963

76964

76965

76966

76967

76968

76969

76970

76971

76972

76973

76974

| Chain for 19194

__

el MX-CN-00

__

Description

Protective Casing for 19195 Bowl for 19195

Bowl Support for 19195 Chain Seat for 19195

Big Chain Pulley Z = 75 for 19195 Chain for 19195

Frame for 19195 Dough Arm for 19195 Shaft for 19195

Protective Plate for 19195 Center Rod for 19195

Chain for 19195

| 12

__

43 191

__

Position

1

2

3

4

5

6

7

8

9

10

11

12

| 75486

__

95

__

Item No.

76975

76976

76977

76978

76979

76980

76981

31190

76983

76984

76985

76986

| Bearing Seat for 19194

__

Description

Chain Pulley Z = 19 for 19195 Chain Pulley Seat for 19195 Big Belt Pulley for 19195 Bearing for 19195

Washer for 19195

Washer for 19195 Top Cover for 19195 Drive Belt for 19195

Small Belt Pulley for 19195 Motor Fixed Plate for 19195 Back Cover for 19195

Bearing Seat for 19195

| 24

__

Position

13

14

15

16

17

18

19

20

21

22

23

24

| __

__

Item No.

76987

76988

76989

76990

76991

76992

76993

76994

76995

27948

27945

| __

__

Description

Locking Ring for 19195 Transmission Shaft for 19195 Motor for 19195

Bearing Seat for 19195 Bottom Plate for 19195

Electrical Supporting Plate for 19195 Rubber Foot for 19195

Bottom Pulley Z = 19 for 19195 Tension Pulley Z = 19 for 19195

Push-Lock Turn-Reset Switch for 1919 Micro Computer Controller for 19195

| __

__

Position

25

26

27

28

29

30

31

32

33

5

Item No.| Description| Position| Item No.| Description| Position| Item No.| Description| Position
---|---|---|---|---|---|---|---|---
76996| Protective Casing for 19196| 1| 77008| Chain Pulley Z = 19 for 19196| 13| 77020| Locking Ring for 19196| 25
76997| Bowl for 19196| 2| 77009| Chain Pulley Z = 19 for 19196| 14| 77021| Transmission Shaft for 19196| 26
76998| Bowl Support for 19196| 3| 77010| Big Belt Pulley for 19196| 15| 77022| Motor for 19196| 27
76999| Chain Seat for 19196| 4| 77011| Washer for 19196| 16| 77023| Bearing Seat for 19196| 28
77000| Big Chain Pulley Z = 75 for 19196| 5| 77012| Washer for 19196| 17| 77024| Bottom Plate for 19196| 29
77001| Chain for 19196| 6| 77013| Washer for 19196| 18| 77025| Guiding Wheel for 19196| 30
77002| Frame for 19196| 7| 77014| Top Cover for 19196| 19| 77026| Rubber Foot for 19196| 31
77003| Dough Arm for 19196| 8| 77015| Belt for 19196| 20| 77027| Bottom Pulley Z = 19 for 19196| 32
77004| Shaft for 19196| 9| 77016| Small Belt Pulley for 19196| 21| 77028| Tension Pulley Z = 19 for 19196| 33
77005| Protective Plate for 19196| 10| 77017| Motor Fixed Plate for 19196| 22| 27948| Push-Lock Turn-Reset Switch for 19196
77006| Center Rod for 19196| 11| 77018| Back Cover for 19196| 23| 27945| Micro Computer Controller for 19196|
77007| Chain for 19196| 12| 77019| Bearing Seat for 19196| 24| | |

Electrical Schematics

Item	Description	Item	Description
A1	Micro-Computer Controller	SQ1	Journey Switch
M	Motor	SB1	Push-Lock/Turn-Reset Switch
KM1/2	Contactor	FU1	Fusioner Fuse 2A
FR1	Heat Relay

Warranty Registration

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting:

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American foodservice industry. Our success over these many years can be attributed to our commitment to strengthening and develop new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia and South America, we continually work to improve and grow the company. We strive to offer customers exceptional value through our qualified local sales and service representatives who provide convenient access to over 5,000 globally sourced products.