Smart Application NICO ETA221990000 Robotic Vacuum Cleaner User Manual

Smart Application NICO ETA221990000 Robotic Vacuum Cleaner

BASIC STRUCTURE OF THE APPLICATION MAIN CONTROL MENU

USER’S MANUAL FOR ETA SMART APPLICATION
Dear customer,
Thank you for your confidence in the ETA brand products. This manual is destined for all owners of the ETA221990000 NICO vacuum cleaner, who want to use in full range its potential by means of ETA SMART Application. You can find here simple instructions and procedures how to work with your new robotic friend.

APPLICATION INSTALLATION
You can find this application in the database of Apple Store or Google Play, or can also use this QR code for quickening:

Download and install the application to your mobile phone (tablet).

COMPATIBILITY

Mobile phone (tablet) operation system| Android 6.0 and higher
IOS 11.0 and higher

Wi-Fi network

| 2,4 GHz
security WPA1 and WPA2

(WPA2 is recommended)

ATTENTION: The appliance cannot be operated with Wi-Fi networks secured with IEEE 802.1X protocol (as a rule, company’s Wi-Fi networks).

CREATION OF ACCOUNT

1. Switch-on ETA SMART.
2. Click on „Register“.
   • Afterward, it is necessary to confirm principles of personal data protection.
   • Set an email of your user’s account.
   • Then, click on „Get Verification Code“.
3. After that, an individual verification code will be sent to your e-mail.
4. Set a password and finish creation of your account.
5. Login with this account to the application

PAIRING OF APPLIANCES

• Connect your mobile phone (tablet) to your Wi-Fi network.
• Switch-on ETA SMART Application and login to your account.
• After that, click on „Add Device“ (or to „+” in the right upper corner).
• Select the „ETA2219 Nico“ vacuum cleaner.
• Enter your Wi-Fi network name and password.
• Automatic mode
  • Check/set correct pairing mode to „EZ Mode“ (top right).
  • Quickly press (twice) ON/OFF button.
  • Check flashing of the Wifi light indicator on the device and acknowledge.
  • Then click to ‟Next“ and wait until the pairing procedure has been completed (see step 7).
• Manual mode
  • Check/set correct pairing mode to ‟AP Mode‟ (top right).
  • Quickly press (twice) ON/OFF button.
  • Check flashing of the Wifi light indicator on the device and acknowledge.
  • Then click to ‟Next“ and go to the next step.
• Click on „Go to Connect“, and then you will be automatically redirected to the list of Wi-Fi networks available in your phone (tablet).
• Select the vacuum cleaner Wi-Fi network named „SmartLife-…“ and wait for connection with the vacuum cleaner. Afterwards, „Internet may be unavailable” will appear, but it‘s all right. A mobile phone (tablet) is connected to the vacuum cleaner, and a pairing procedure will be performed in the next step. Now, return back to ETA SMART Application.
• Wait for a while until all three steps of the pairing procedure have been performed correctly.
• In the end, the application will inform you about successful pairing.

REMARKS :

• Before pairing, we recommend that you fully charge the vacuum cleaner (or at least, 30% of the accumulator capacity).
• The initial setting is ‟Automatic pairing mode“. If pairing of the device with the wifi network fails, switch over to Manual and repeat the pairing procedure.
• Follow attentively information and particular steps in the application.

AUTOMATIC CLEANING

• On the main screen, click on „Auto clening“.
• The vacuum cleaner will clean up systematically all the rooms in the map to which an access is enabled.
• Having finished the cleaning, the vacuum cleaner returns automatically to the charging station.
• If you want to interrupt the cleaning, click on ‟II“ on the main screen

ROOM CLEAN-UP

• Close all doors of the room to be cleaned.
• On the main screen, click on „Room cleaning“.
• Then the robot vacuum will clean the room efficiently.
• Having finished the cleaning, the vacuum cleaner returns automatically to the charging station.
• If you want to interrupt the cleaning, click on ‟II“ on the main screen

CLEANING ALONG THE WALLS

• On the main screen, click on „Edge cleaning“.
• The robot vacuum will only clean the floor area along the walls.
• Having finished the cleaning, the vacuum cleaner returns automatically to the charging station.
• If you want to interrupt the cleaning, click on ‟II“ on the main screen.

SPOT CLEANING

• On the main screen, click on „Spot“.
• The robot vacuum will only clean the surrounding area of the spot at which it has been located.
• If you want to interrupt the cleaning, click on ‟II“ on the main screen.

REMARKS: Local cleaning means circular area (radius approx. 1.8 m) around the spot at which the robot vacuum has been located.

SETTING SUCTION POWER AND MOPPING INTENSITY

• On the main screen, click on „Cleaning strength“.
• Click on the required setting with a finger to select it. Three suction power/mopping intensity levels are available.

REMARKS: The suction power and mopping intensity will be adjusted in the same way. As soon as the mop unit has been fitted, the device will be automatically switched to adjustment of mopping intensity instead of the suction power (no suction while mopping)

PLANNING OF CLEANING

• On the main screen, click on „Schedule cleaning“.
• Click on „Add“.
• Set time in the upper part.
• In the „Repeat“ menu, set days when you want to repeat cleaning.
• The relevant cleaning process can be indicated by entering any name in the„Note“ menu.
• Notification of the relevant cleaning process can be switched on/off in the „Notification“ menu.
• Information on the scheduled cleaning process always being made in „Automatic cleaning“ mode can be obtained in the„Operating mode“ menu.
• Click on „Save“ in the right upper corner to save setting.
• Using switches, you may activate/deactivate particulars cleanings.
• If you want to modify one of the planned cleanings, click shortly on the corresponding cleaning with a finger.
• If you want delete a planned cleaning, click long on the corresponding cleaning with a finger and consequently confirm the deletion by clicking on „OK“.

REMARKS:

• The scheduled cleaning process can only be set in the „Automatic cleaning“ mode.
• Up to 30 planned cleanings may be set.

REMOTE CONTROL

• The robot vacuum can be manually operated using direction buttons on the main screen

ROBOT VACUUM MOVEMENT MONITORING

• Click on „Show map“ on the main screen.
• Now you can monitor the movement of the device in real time.

REMARKS: Device movement will only be shown in „Automatic cleaning“ and„Room cleaning“ modes.

HISTORY OF CLEANINGS

• On the main screen, click on „Cleaning record“.
  

• Then the cleaning history list will be displayed.

• Click on a particular cleaning in the list of cleanings in the history to see detailed information on the corresponding cleaning.

• Click on „Delete“ in the upper right-hand corner in section „Cleaning record“.

• Then click on „Select all“ in the lower lefthand corner.

• All items will be highlighted.

• If you want to retain some items in the history, click on the ‟Check‟ symbol of the relevant item.

• After completion of the required changes, confirm the deletion by clicking on „Delete‟ in the lower right-hand corner.

SETTING OF SHARING

• Click on the pencil symbol in the right upper corner of the main screen.
• Select „Share Device“ in menu.
• Click on „Add sharing“.
• After that, choose a country and enter e-mail of the account with which you want to share the vacuum cleaner.

REMARKS:

• Users, with which you share your vacuum cleaner, may also control it, but have partially limited possibilities.
• A user, to whom you want to set sharing, has to create his/her own account in the ETA SMART application.

FIRMWARE UPDATE

The vacuum cleaner has software in its inner memory named Firmware. If a newer version has been issued, it is necessary to update it.

• Click on the pencil symbol in the right upper corner of the main screen.
• Select „Device Update“.
• If a new version is available, confirm update. Having finished updating, place the vacuum cleaner into the charging station. The vacuum cleaner has to be connected to a Wi-Fi network with available Internet connection.
• If you require to check automatically new available versions, you may switch-on the„ Automatic Updates“ option.

TROUBLESHOOTING

Problem Solution

The application gets jammed or is “frozen”.| Restart the application. If it doesn’t help, restart your smart appliance.

The application doesn’t react at all, although was functioning well earlier.

| Most probably, the situation is caused by

a change, which has been performed in your phone (for example, installation of other applications, system update, etc.) or in the Wi- Fi network. If you cannot solve the problem by returning your phone or Wi-Fi network to the state before changing, uninstall ETA SMART Application and install it again.

You do not succeed with pairing the vacuum cleaner and a Wi-Fi network.

| Check the version of the operation system in your

mobile phone and use only supported versions (Android 6.0 and newer; IOS 11.0 and newer).

Use high-quality Wi-Fi router, which sufficiently

covers your house.

During paring, keep your mobile phone

sufficiently close to the vacuum cleaner (in a distance approx. 2 m).

References

• Technická podpora robotických vysavačů | ETA - tady je doma

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>