SOLIGHT W0769-G LED Ceiling Light Instructions
- June 5, 2024
- Solight
Table of Contents
SOLIGHT W0769-G LED Ceiling Light
instruction manual for LED ceiling light Treviso W0769-G, W0769-W
Dear customer, thank you for purchasing our product. For its safe and full functioning, please read these instructions carefully and adhere to them to avoid product misuse or damage. Please prevent unauthorized use of this appliance and always observe all rules for using electric appliances. Keep these instructions for future reference. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced. The installation must be performed by qualified personnel only.
installation
- Turn off the main power source.
- Drill 2 holes, insert anchors and mount the bracket.
- lnsert screws to the side holes and attach the included pothooks.
- Connect the input cable to the terminal block.
- Attach the light. Tighten the two sides screws.
- Activate the power source.
note: The light can be controlled with a remote control or by a wall switch. Switching the light temperature is done by quick, consecutive presses of the wall switch. lf the time delay between individua! presses is longer than 10sec. the light comes on in the preset mode, see functions/buttons “Memory” on the remote control.
Green/red LED
- Power 48 W
- Dimension 450 x 450 x 100 mm
- IP protection IP20
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>