HENRAC EPD-01 Eskom Power Detector User Manual
- June 5, 2024
- HENRAC
Table of Contents
HENRAC EPD-01 Eskom Power Detector
INSTRUCTIONS
Step1: Create a TUYA Account on your Cell Phone
(skip if you already have one) Using your mobile via the Google Play or Apple
iStore search for an app ‘tuya’ or ‘smartlife’ and select install or simply
scan the QR codes. Note: Tuya offers two near-identical apps (personal
preference, you are welcome to try both)
**Open the Tuya App:
**
Enter your country and your email address and then select ‘Get Verification
Code’. Retrieve your code (sent to your email inbox) and create a password.
Done.
We recommend you add and configure all smart devices from the comfort of your
desk or table prior actual installation. Ensure the WiFi SSID & PW are the
same at both locations.
Step2 : Switch ON your Smart Device
Before any device can be added to the App you need switch ON the device and
make sure it is in ‘pairing mode’. By default, all our products are shipped in
Pairing Mode. If not, or you simply want to switch accounts etc. then see
pairing mode below.
Connecting your Device
- Connect the unmarked White leads to 230VAC only. You can use any old lead and a terminal block for connection.
- Remove the enclosure lid
Pairing Mode
The Blue LED on the ‘Smart garage Controller’ will blink rapidly in Blue. If not, press and hold the ON/OFF button till the unit resets to the above state.
Step3: Selecting your Smart Device (Tuya App)
- From the Tuya App in the top right click the + sign
- Select in ‘Add Device’ then select ‘Add Manually’
- From the left select the “Electrical’ category
- Scroll down and select ‘Garage Door Opener (Wi-Fi)’
Step4: Adding your Smart Device (Tuya App)
- The App will display your WiFi network.
- Enter your WiFi Password
- Allow up to 2 Minutes for connection
- Confirmation will be ‘Added Successfully’ and below the device name
Step5: Rename your Smart Device (Tuya App)
- Rename the device for better identification to any alphanumeric
Step6: Testing your Smart Device
- Connect the RED to 230VAC and switch ON/ OFF to simulate load-shedding | Closed (orange) = ON = Eskom Present / Opened (green) = OFF = Loadshedding
Step7: Install your Smart Device
- Most devices will require a qualified electrician/installer. *warning 230VAC electrical shock
Add Timing functions to your Smart Device | schedule ON/OFF at various times of the day & week etc. Smart Timing Manual – download [click here] Add Automation functions to your Smart Device | ‘If this happens then do that’. Smart Automation Manual – download [click here]