HENRAC TECH F2 Smart WiFi Door Lock User Manual
- June 5, 2024
- HENRAC TECH
Table of Contents
TECH F2 Smart WiFi Door Lock
User Manual
PRODUCT NOTICE AND PRODUCT MAP
Dear users, Hello! Thank you for using this smart lock Please check the
product list carefully before you install and use this product, read the
installation instructions, and install the product according to these
installation instructions. If it is not installed according to this
installation instruction, a direct or indirect product problem will be caused.
, and other hazards and losses, our company does not assume any
responsibility.
Inner panel/ Outer panel
INSTALLATION INSTRUCTIONS
HEED
The door lock, lock body and handle can be used for different opening doors,
which can be reversed left and right. Please select different lengths of
mounting accessories according to the thickness of the door.
0PENING DIRECTION
MEASURING THE LENGTH AND WIDTH OF THE GUIDE PIECE
FUNCTION AND OPERATION
Initialize
One-sided initialization:
Long press the button “Set” (on the rear panel) for 5s, and sound the voice
prompt “successfully initialized”.
Double-sided initialization:
In the front panel (back panel), press *# to enter the Settings menu after
verification by the administrator, and select “2 Delete user” type “666#”
system initialization (front and back panels each initialization need to
operate separately)
Note: the password under initialized state is 123456, or input any
fingerprint to open the door.
Add administrator’s information (it’s allowed to add 9 administrators at
maximum).
Add unlocking information
Note: the first 9 unlocking information are referred to the
administrators, and if s allowed to add 300 pieces of unlocking information at
maximum). Remote control (optional). Delete unlocking information
Normally on
Note: in case the product is working under “normally on” mode, the lock
will not close automatically after each unlocking, and needs to be closed
manually once
Mute mode
Note: in case the product Is set to such mode as “mute on”, each unlocking
shall be subject to mute mode.
WeChat Mini Program
Scan WeChat to open the applet Please follow the instructions
Other descriptions
- If the operator continuously fails to enter the right password 6 times, the keyboard shall be locked for lmin., and the system shall not respond to any operation during this time.
- Peep prevention password: the password shall be entered by such method as XXX password XXX, that is, add some unrelated code before and after the password, then press “#” for confirmation. The input contents shall contain the password.
- During each operation, the system shall exit automatically if the operator fails to input any command for more than 12s.
- If the voltage is lower than 4.8V, the automatic alarm shall be activated during each unlocking operation, and the unlocking operation can be conducted 200 times after activating this automatic alarm; please replace the battery before reaching the ruled unlocking times, otherwise, there will be unlocking delay.
- Under the initial state, input “555666333#” to realize the language switch, and it supports such two languages as Chinese and English.
TECHNICAL PARAMETERS
INSTALLATION INSTRUCTIONS USE PICTURES FOR REFERENCE ONLY PRODUCT DRAWINGS ARE SUBJECT TO THE REAL THING.
Key type | number | Serial number | remark |
---|---|---|---|
9 | 10 | 1-9 | |
The average user | 280 | 10-300 |
PARAMETER
POWER SUPPLY| 5AA BATTERY
<50 uA
QUIESCENT CURRENT
WORKING CURRENT| <250 mA
FINGERPRINTS| < =100
CARDS| < =300
PASSWORDS REMOTE CONTROL| < = 300
< =100
WORKING TEMPERATURE| -10°C – 60°C
WORKING HUMIDITY| 20% – 93%
AFTER-SALES SERVICE WARRANTY CARD
USER NAME (UNIT)……………..
UNIT………………………..
PURCHASE DATE…………………
TEL……………………….
MODEL…………………………..
NUMBER…………………..
NUMBER…………………
MODEL…………………………..
PROBLEMS AND SOLUTIONS SIGNATURE……………….
DATE……………………………….
01……………………….
02…………………………