HENRAC TECH ZMAI-90 Wi-Fi Smart Switch Electricity Meter User Manual
- June 5, 2024
- HENRAC TECH
Table of Contents
WIFI Smart Switch Electricity Meter RoHS
USER’S MANUAL
Overview
Single-phase intelligent monitoring °courant is a high-tech product. manufactured by specific integrated Circuits. latest microelectronics technology and SPAT process design. The control chips of this meter use professional meeting Soc supporting a current dynamic range of 5000 1. with active power measurement error less than 0 1%, this meter can provide industnal-grade precision measurement for modules This meter has higher integration level and superior anti-electromagnetic interference performance It also designed according to the features of China Power Grid. which has the characteristics such as ultra-wide operating voltage range. high reliability. long working life, high precision, and low povrerThis product can be used to measure single-pelage AC active energy weft the rated frequency 50.180/42, d types of meat the technical requirements in the laved and lever 2 static AC active energy meter of national standard GB:712215-1998
Main Features
- Using LCD Nqu4 crystal display la sham electricity information. under normal use conditions the sernce, some of LCD liquid crystal display rs over 10 years
- With power pulse output for meter calibration, and passive photoelectric isolated OC gate output poi. the pulse width rs 80mst20ms. The waveform is a square wave (Optional)
- Using super bright. long-life LED working indicator The pulse indicator red) flashes when there is a pulse.
- With the UART interface communication method, it can be expanded to other communication methods.
Technical Parameters
Model specifications
2. Basic error
| Laid Cunard | Pater Fedor | Error Lard IV |
|---|---|---|
| 0 OSItr-00 Ile | 1.0 | ±1 .5 |
0,titrations
0 Ste4se0 2.| 0.51.0.BC| ±1 .5
0 sar- I- Seas
3 Startup With the condition of the reference voltage and reference frequency.
cosrla=1 0. after load current using to 0.0041h. the meter will start up and
record continuously.
4 Creeping When no current exists in the current line of pone, meter and add
115% of reference voltage on voltage line. the test output of the power meter
should not generate more than one pulse
5 Electrical Parameters Working Voltage 0.9Un-1 lUn Extreme Working Voltage 0
7Un- 1.3Un
6 Temperature and humidity range Working Temperature -45 G-•70 C Storage and
transportation Temperature -45 C-•70 r Annual Average HumidityC 75%
7 Rated Frequency 50160Hz
8 Power Consumption: 1W. 6VA
9. Weight: approx. 0.8Kg
10.Size 100mm’36mm’66mm (For reference
Main Functions
1. Measurement Function MeaSrle 1001 ad.* power as shut .t,7-01.1 WM)
perforated and negative arrive energy measurement tuna on. acrumuta.ng
negelire active energy as portant energy.
2. Display Function Cumulative total power, voltage. current and active power
Power display with two decimal places, with a unit of non. Voltage display
with one decimal place. with a unit of V and represent as “U’ Current display
with two decimal places. with unit of A and represent as Power display with
two decimal places. with a unit of kW and represent as ‘P’
3. LED indicator introduction Pulse indicator, pulse medicated) flashes when
Moro is a pulse. On-off switch indicator
- LED off when switching on
- LED on when switching off Wi. Fi indicator I) LED flashes when haven’t
connected Wi-Fleet 2) LED turns off after connected
4 Button introduction Long press the up button for 5 seconds: Wi-Fi module starts connecting mode. Wi-Fr Indicator flashes.
5. Time switch Please refer to the APP operation instruction for the detailed operation.
6. APP power collection method refreshes total power once every 0.1 kWh or 5 minutes
Installation and Use
1 Please install a power meter indoors in a dry and good ventilation environment, the base plate used to install the power meter should fixed on a solid and fire-resistant wall that is stable. recommended install height is about 1 8 meter. or install in dedicated distribution box 2.111S necessary to connect the wire according to the wiring diagram on the end box. we recommend you to connect with the copper joint to avoid the power meter being burned for the poor contact of the copper joint in the end box 3 Lightning protection measures are necessary which power meter is used at the place where a thunderstorm is frequent to avoid the meter from being burned when struck by lightning
Storage and Transportation
1 Store the power meter with the anginal packaging. storing environment
temperature should be within -25 C-.70 C. relative humidity should be lower
than 85% and the au should not contain gas which may cause erosion.
2. This product is an electronic device, please avoid heavy objects impact
and bumping when transporting and carrying it. 3 When the outer case of the
power meter has obvious cracks caused by severe shock or drop from high
position dunng the transportation carrying and instalation, please do not
connect wires to this power meter.
Quality Assurance
Within a year after the manufacture date of the power meter. when a user discovers the power meter cannot meet the national standard with the condition that the user use the meter according to the user s manual and the outing case is complete our company will repair or replace the meter free of charge.
APP Operation Instruction
Install and log in APP
https://smartapp.tuya.com/tuyasmart
- Scan the OR code underneath with a mobile OR code scanning tool, or search -Wye amen’ at the mobile application market to download and install the APP
- Connect home Wi-Fi on your mobile phone and start the ‘tuya smart’ APP.
- Follow the instruction in the APP to register: log in APP account and add a new device.
- After finishing adding a new device, you can use APP to control your device conveniently.
- APP is based on the actual released version
Network Settings
Stan ‘tuya smart’ APP and Lug in At the first page, select family at the top
left corner and then click on the top right corner In enter the device
addition setting page. 
- Click ‘all device’ and find out the ‘socket’ item to select. Turn the power on of the power meter and long-press switch for 5 seconds till the network indicator flashes rapidly, click the ‘confirming the indicator is flashing rapidly” button
- Input the password of the connected Wi-Fi. Only supports 2.46 wireless network, 56 wireless networks is not supported Existence of Chinese Characters in Wi-Fl name and password is currently not supported, it may cause the APP fails to add a new device. • Click “Confirm’ and wait for connection.
- When finishing the connection and adding the device successfully. you can set the installation room of the device Switch button and central power button can control the power on-off of the device
- Time switch button can control the device to power on or off at the specified time. The delay button can control the device to power on or off after the specified time Using the power button can check the accumulated electricity amount and the power, voltage. the current of connected electrical appliance
