HENRAC TECH Smart WiFi Smoke Detector Instructions
- June 5, 2024
- HENRAC TECH
Table of Contents
HENRAC TECH Smart WiFi Smoke Detector
Introduction
This product is a smart photoelectric smoke sensor with an ultra-low-power MCU design. It is an early warning device, cant detect gas, heat, or fire, nor stop a fire or put out fire. lt is capable of real-time detecting the presence of smoke. Once detect the danger of fire smoke, a red LED will be ON, and alarms to alert you and your family timely. t can be widely used in households, Lounge, coffee hoUse, dancing halls, and any other places that need fire alarm monitoring.
Specifications
- Input Voltage: DC3V LR03
- Static Current: 15uA
- Alarm Current: <160mA
- Low-voltage notification:2.4V
- Alarm Sound Level: 80db/1m
- WiFi: 802.11 b/g/n
- Detecting Range: 20m
- Installation Method: Ceiling Mounted
- Working Temperature: -10’C+50C
- Working Humidity: 95%RH
Flat Ceiling Mounting
The preferred location to install a smoke sensor is in the centre of the ceiling because smoke, heat and combustible products rise to ceil and will laterally spread. Keep at least 30cm distance from lights or decorations, and at least 15cm away from walls and CorneTS
Sloping Ceiling Mounting
if the Ceiling is sloping, please install the smoke sensor at a horizontal distance 90cm away from the ceiling top.
How to use:
- Clockwise rotation the mounting bracket, take out and prepare to install the battery.
- Input 2pcs AAA battery inside, the LED indicator ON and then OFF
- Download the “TuyaSmart” App, or Scan below QR COde to download.
- Register a Tuya Smart App accOunt with your mobile phone, and log in. Click +” at “My Home or the Mid-blank space to add a device, choose Security Sensor, find Sensor (WiFi), and click.
- Press the RESET for more than 5 Seconds with the PIN, the LED indicator flashes quickly, and start network configuration automatically. input the WiFi code to start connecting
- Press RESET for 5 seconds with PIN when configuration network, indicator flashes slowly, start manual network configuration mode. Input WiFi account and code to add device
- Configuration network successfully clicks smoke detector. long press TEST, the buzzer will have Di DI sound, App receive the notification” Detecting smoke”; Release TEST App will show “No Smoke Detected
Mute function
Please make sure there is no real danger of fire when using the mute function. Under known and non-fire alarm conditions, please do not block or by any other form to prohibit alarming. Press the Test/Mute button to lower sensitivity and relieve the alarm. Test: To burn cotton produces smoke and face the smoke detector. When the smoke detector have a DiDi alarm, press TEST/MUTE to stop alarming. Please do not use a flame to do the test.
State and Trouble Shooting
| S la te | L ED | So un d Alarm |
|---|
Norm.i’I
| ****
Reod LEO flashes
evet)’60:;:ecomk
| ****
No
| T … 1 | Red LED ON | Ra d ‘Di-Di-Di” |
|---|---|---|
| Alarm | Red LED ON | Ra d ‘Di-Di-Di” |
Low Power
| Reel L ED flas!he:; two times el/ @IY 60 seconds| ****
N o
Slandby
| 15 second:. Tesl a!;arming, LED OFF| ****
N o
Aul o Network. Config111ralion| L ED Indi:ootor fl,’]she:; every 1 second|
No
Manual Network Configuration| LED IndJootor fl,’]she:; every 3 second:;| ****
No
If the smoke detector can’t work normally, please do check as follow:
- If the battery has been used over, so please replace the battery timely.
- Please clean the smoke detector timely.
- If correct install the mounting bracket.
- Smoke alarming ( TEST ) has no notification please make sure the distance from installing place to the router is within 10 meters.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>