UGREEN AB0540 7×10.5cm Wireless Charger Instructions
- June 1, 2024
- UGREEN
Table of Contents
UGREEN AB0540 7×10.5cm Wireless Charger
Product Information
Specifications:
- Product Model : 2982
- Main Functions : Wireless charging transmitter
- Standard Version : WPC – 1.1
- Charging Type : One-on-one charge corresponding area
- Input Specs : 5V 2A, 9V 2A
- Output Specs : 5V 1A, 9V 1.1A, 9V 1.67A
- Output Effective Distance : 4 to 6 MM
- Conversion Efficiency: 70%
- Charging Methods: Induction model
- Working Frequency: 111.5-205KHZ
- Accessories: USB cable, Wireless charging pad, Packing box, Instruction sheet
Product Usage Instructions
- Connect the wireless charging pad to a power source using the included TYPE-C cable. The charging pad will enter standby mode with a white indicator flash.
- Place your portable device in the center area of the charging pad. Charging will begin with a white color indicator light turning on.
Important Notes:
- This device complies with Part 15 of the FCC Rules.
- Keep a distance of at least 20cm between the user and the product.
Frequently Asked Questions (FAQ)
-
What should I do if the wireless charger causes interference with other devices?
If interference occurs, try reorienting or relocating the receiving antenna, increasing the separation between the devices, or connecting the charger to a different circuit. Consult a professional for further assistance. -
What is the effective charging distance of the wireless charger?
The effective charging distance is between 4 to 6mm. -
How do I know if my device is charging?
When your device is placed correctly on the charging pad, a white indicator light will turn on, indicating that charging has begun.
The diagram of installation
- Connector for power supply
- Charging area
- Indicator Light area
- Instruction sheet
Wireless Charger`s Charging Method
- Connect wireless charging pad to a power source via included TYPE-C cable. Charging pad entering standby mode with white indicator flash.
- Place your portable device in the center area of the charging pad, charging begins with white color indicator light on.
Product specs
-
Product model: 2982
-
Main functions : wireless charging transmitter; Standard version: WPC – 1.1;
-
Charging type : one-on-one charge corresponding area; Input Specs: 5V 2A,9V 2A;
-
Output Specs: 5V 1A, 9V 1.1A, 9V 1.67A, output Effective Distance: 4 to 6 MM；
-
Conversion efficiency : ≥70%；
-
Charging methods: induction model;
-
Working frequency: 111.5-205KHZ;
-
Accessories: USB cable; Wireless charging pad; Packing box, and instruction sheet.
Warning!- This wireless charger is designed to charge Qi compatible mobile phones. Not for use with Airpods®, Airpod Pros® or other earphones with wireless charging cases.
- Airpods is a trademark of Apple Inc., registered in the U.S. and other countries.
FCC NOTE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful interference to
radio or television reception, which can be determined by turning the device
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver. –Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment
The distance between user and products should be no less 20cm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>