Big-Autoparts 2 Replacement Keyless Entry Remote Key Fob Clicker-Complete Features/Instruction Guide

Big-Autoparts 2 Replacement Keyless Entry Remote Key Fob Clicker

Specifications

• ITEM WEIGHT : 1.44 ounces,
• PACKAGE DIMENSIONS : ‎ 4.13 x 2.2 x 0.94 inches,
• BATTERIES : 1 AAA batteries required.

Introduction

It is 100% complete new keyless entry remote ignition key pair with battery, electronics, and transponder chip (will start your car) inserted. It is Compatible with Ford F-150, F-250, and F-350 models from 1998 to 2016. In both form and function, this replacement part is a great match for the original. Please double-check the vehicle compatibility information because some remotes may appear to be identical but are not. Also, double-check that the buttons on your original remote are the same.

The remote will only work if your vehicle already has keyless entry. CWTWB1U345, CWTWB1U331, GQ43VT11T, CWTWB1U212,8L3T-15K601-AB,2L3T-15K601-AB, F87B-15K601-AB,8L3Z-15K601-AA,164-R8007, OUCD6000022,164-R8070 are the replacement keyless entry part numbers.

What’s in the Box

• 2pcs Complete Remotes with Electronics and Batteries

How to pair the key with Ford Fusion 2006

You can pair the key with Ford Fusion 2006 by following the given steps:

1. In the ignition, insert the first previously programmed key.
2. Turn the ignition key to the on position. Turn on the ignition for at least three seconds, but no longer than ten.
3. Remove the first programmed key from the ignition and turn it off.
4. Insert the second previously programmed key into the ignition after three seconds but before ten seconds has passed since the ignition was turned off.
5. Turn the ignition key to the on position. Turn on the ignition for at least three seconds, but no longer than ten.
6. Remove the second previously programmed key from the ignition and turn it off.
7. Insert the new unprogrammed key into the ignition after three seconds but no more than ten seconds after turning off the ignition and removing the previously programmed key.
8. Turn the ignition key to the on position. For at least six seconds, keep the ignition turned on.
9. Turn off the ignition with the freshly programmed key. If the key is programmed correctly, it will start the car and operate the remote entry system (if the new key is an integrated key head transmitter). Wait 10 seconds before repeating Steps 1 through 8 if it was not correctly programmed.

How to pair the key with Mazda C3 2016

This vehicle’s smart key remote fobs cannot be programmed on board and must be programmed by a skilled professional.

1. Use the phone number or website below to find an automobile locksmith in your region.
2. If your vehicle is still mobile, driving to the locksmith rather than having them come to you could save you money.
3. The locksmith will then connect your vehicle to specialist computer equipment to programme the smart key remote fob.

How to pair the key with Mercury Cougar 2002

1. In 6 seconds, switch the ignition from OFF to RUN four times.
2. Turn off the ignition. To validate programming mode, the clock/trip computer’s LED will flash up continually.
3. Press any button on the first keyless remote within 20 seconds. To validate programming, the clock’s LED will blink four times.
4. Press any button on the second keyless remote within 20 seconds.
5. Press the RUN button on the ignition. To mark the conclusion of programming mode, the LED will turn off.

How to pair the key with Lincoln LS 2006

1. Use the phone number or website below to find an automobile locksmith in your region.
2. If your vehicle is still mobile, driving to the locksmith rather than having them come to you could save you money.
3. The locksmith will then connect your vehicle to specialist computer equipment to programme the smart key remote fob.

Frequently Asked Questions

• Is it possible to replace a keyless entry remote?
  You only need a quarter, your old remote, and a new keyless entry remote case from NAPA Auto Parts to replace the casing for your keyless entry remote control. Not only does each kit include a new keyless entry remote case, but it also includes a new button pad to ensure that the buttons do not stick.

• Is it possible to replicate a remote car key?
  You can get a duplicate of your automobile key from your dealer. Your dealer will place an order for a blank key, which he will programme in the shop. However, he may not be able to cut the mechanical element of the key and will refer you to a multi-service shoemaker if this is the case.

• Is it possible to replace the remote control for your keyless entry system?
  You’ll only need a quarter, your old keyless entry remote, and a new keyless entry remote case from NAPA Auto Parts to replace the casing for your keyless entry remote control. Each kit includes a replacement button pad to ensure that the buttons do not stick.

• Can a remote car key be duplicated?
  To get a copy of your automobile key, go to your dealer. Your dealer will place an order for a blank key, which he will programme in his shop. However, he may be unable to cut the mechanical portion of the key and will refer you to a multi-service shoemaker if this is the case.

• What is the best way to get a key created using my VIN number?
  Without the original key, you can have a car key produced. A locksmith may produce a car key by code using the automobile’s VIN number, which is the simplest way to replace lost car keys. Locksmiths can get the original vehicle key cutting for the car using the VIN number, which tells them how to cut the key.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>