EarFun TW300 Air Pro 2 Wireless Earbuds User Manual
- June 14, 2024
- EarFun
Table of Contents
EarFun TW300 Air Pro 2 Wireless Earbuds User Manual
1 EarFun Audio app
Download the EarFun Audio app for an enhanced experience.
- Equalizer tuning, custom controls
- Firmware update, earbuds battery status
- Less data tracking, personalized device name
- Built-in feedback, and more
2 How to Fit
Note:
- Please choose the suitable eartip for the best sound and secure fit.
- Select the left or right earbud, and insert to the corresponding ear.
- Rotate the earbud back and forth for the eartip to create a comfortable seal.
3 What’s in the Box
4 Product Diagram
- Touch control zone
- Earbuds LED indicator
- Microphone
- Charging contactor
- USB-C charging port
- Charging case
- Charging case button
- Charging dock
- Charging case indicator
5 Charging case indicator
1. First-time Pairing with Device
Step 1: Open the charging case, the earbuds will automatically power on and
enter into pairing mode.
Step 2: Activate Bluetooth on your Bluetooth-enabled device and search for
other Bluetooth devices.
Step 3: Select “EarFun Air Pro 2” from the list of Bluetooth devices shown (if
a password is needed, type ‘0000’).
- The earbuds will automatically connect with the device they were last paired with when the case is open.
- Each earbud could be used independently.
2. Connect to a New Device Option A
Step 1. Unpair the earbuds from the Bluetooth-enabled device that’s connected.
The earbuds will disconnect from the current device and enter into pairing
mode for another pair.
Step 2. Search on the new device and connect.
Option B
Step 1. Place both earbuds back into the charging case and make sure they are
being charged, keep the cover open and then press and hold the charging case
button for 2 seconds until the LED indicator on both earbuds flash in blue
rapidly.
Step 2. Search on the new device and connect.
6 Functions
7 Earbuds LED Indicator
8 Reset and Reconnecting
If you fail to build connection between two earbuds, or between earbuds and Bluetooth device, please try the following steps:
- Place both earbuds into the charging case.
- Keep the charging case open, then press and hold the charging case button for at least 8s until both earbuds flash in purple, then earbuds have been reset successfully.
- Delete the old connection from the Bluetooth device and reconnect “Earfun Air Pro 2”.
9 Charging
- Open or close the charging case to activate the LED battery indicator.
- Remove the insulating film on the charging case for the first time.
- Fully charge both the earbuds and the charging case before the first-time usage.
- Place earbuds back into the charging case and the earbuds will start charging.
- Fully dry off the earbuds and the USB port before charging.
10 Specifications
11 Troubleshooting
Q: Can I use both earphones separately?
A: Yes, each earbud could be used independently.
Q: The earphones are turning on, but it doesn't connect to my device?
A: To connect the earbuds to your device, please check if the Bluetooth of the device is on at first, then select 'EarFun Air Pro 2' on the Bluetooth list to get paired. If the earbuds still can't connect to your device, please try to reset it, or contact our customer support.
Q: Why the connection is not stable and cuts out intermittently?
A: Please make sure there are no objects between the earphones and your Bluetooth device, and make sure there is no radio or WIFI interference nearby.
Q: What is the range of Bluetooth earphones?
A: Bluetooth earphones have maximum range of 49 feet (15m, no obstacle). However, the actual range will depend on usage and environment.
Q: Is there volume control on the earphones?
A: Yes, touch L earbud once decreases the volume and touch R once could increase it.
Q: My earphones will not switch on.
A: Please recharge it and make sure it has enough battery power. If it is fully charged and still nothing happens or if you are not able to charge the unit, please contact our customer support for warranty cover.
Q: Is the charging case waterproof?
A: No, the earbuds are IPXS sweat & waterproof, but the charging case is not waterproof.
Q: Will the earbuds shut off automatically?
A: The earbuds will remain on as long as they are connected to a device. If no audio is in use, they will enter power-saving mode and wake up once audio is played. If the earbuds are not connected with any devices, they will automatically shut off in 10 minutes.
Customer Service
For FAQS and more information
Please Email to: service@myearfun.com
www.myearfun.com
MODEL: TW300
FCC ID: 2AVIT-TW300 HVIN: TW300 IC: 25936-TW300
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>