ALM-CS002 6U 84HP Eurorack Powered Case Kit Installation Guide
- June 6, 2024
- ALM
Table of Contents
6U 84HP CASE
ASSEMBLY GUIDE.
Assembly Complete!
Final Setup
- Locate a 12-15V center-positive DC power supply with at least 3A of current.
- Prior to adding any modules test the empty case and ensure both the -12V and+12V LEDs light. If a +5V LED is present it will not light.
- If the LEDs do not light check that the connections match this manual’s diagrams exactly. Additionally, make sure your supplier has the correct polarity.
- If the board’s power properly you are ready to populate the case with your favorite Eurorack modules. The power boards can supply a maximum of 2A to all of the modules combined.
- Use standard M3 screws to secure modules.
Visit the ALM TV YouTube channel to view our video assembly guide. For additional support please visit busycircuits.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>