SOAIY SR13 True Wireless Stereo Bluetooth Headset User Guide

SOAIY SR13 True Wireless Stereo Bluetooth Headset

Product Information

The device is designed to operate within the guidelines set forth by the manufacturer. Any changes or modifications made to the device without explicit approval from the manufacturer may void your authority to operate the equipment. The device complies with part 15 of the FCC Rules, ensuring that it does not cause harmful interference and is capable of accepting any interference received. It also meets the FCC radiation exposure limits for an uncontrolled environment.

Product Usage Instructions

• Installation:
  • Place the device in a suitable location with a minimum distance of 0cm between the radiator and your body.
  • Ensure that the device is securely installed and properly connected according to the manufacturer’s instructions.
• Power On:
  • Connect the device to a power source using the provided power cable.
  • Press the power button to turn on the device.
• Operating:
  • Familiarize yourself with the device’s controls and features as described in the user manual. – Follow any specific instructions provided for using different functions or modes of operation.
  • If any interference is experienced, try adjusting the positioning of the device or relocating it to minimize interference.
• Maintenance:
  • Regularly  clean the device using a soft, dry cloth to remove dust or dirt. – Do not use any liquid or chemical cleaners, as they may damage the device.
  • Follow any additional maintenance instructions provided in the user manual.
• Troubleshooting:
  • In case of any issues or malfunctions, refer to the troubleshooting section of the user manual.
  • If unable to resolve the problem, contact customer support or consult an authorized service center.

Note: It is important to read and understand the complete user manual before using the device to ensure proper usage and compliance with safety guidelines.

Introduction

Appreciating your purchase on SOAlY product. Please go through this  manual carefully and keep it conveniently for your next reference. All the content has been carefully filled out by our company. Please forgive me if there are any errors or printing problems.

Precautions:

1. Don’t use this product in extremely hot, extremely cold, dusty and humid environments.
2. Don’t drop, hit, or violently vibrate during use.
3. The performance and functions of the product are subject to change without prior notice.
4. Batteries (battery packs or combined batteries) must not be exposed to sunlight, fire or similar overheating environments.
5. Do not disassemble the machine without authorization to avoid danger.

Product description

Charging box

Eorphona

Quick start guide

Headphones on

1. Open the charging compartment
2. Waiting for the device to connect, the indicator liaht flashes

Headphones pairing

1. @ Find SOAIY SR13 from the bluetooth list and click to connect.
2. The indicator light of the left earphone flashes during pairing. and the indicator light goes out after the connection is successful, and the connection successful prompt tone is played.

Headphones off

Put the headset back into the charging compartment and close the cover to automatically shut down and charge

Music control – play/pause
Click to touch either earphone

Music control – switch song

Double-click the left ear to switch to the previous song, double-click the right ear to switch to the next song

Answer/hang up

• Answer the phoneclick to touch either earphone
• Hang up the phoneclick to touch either earphone

Reject the call

When a call comes in, press and hold the earphone on either side for 3 seconds

Game mode/wake up Siri

Four consecutive taps to touch left ear game mode Touch the right ear four times in a row to wake up Siri

Volume adjustment

Tap the left ear three times in succession to decrease the volume. Touch the right ear three times in a row to increase the volume

Function description

Packing list

• Charging compartment × 1
• Earphone × 2
• TYPE-C charging cable ×]
• Instruction manual × 1

Bluetooth pairing

1. When using, open the charging box, the indicator light of the earphone will flash, turn on the bluetooth of the mobile phone, search for SOAIY SR13″, select and complete the pairing.
2. After the pairing record is established, open the charging box, and the headset will automatically connect back to the last connected mobile phone.
3. Please complete the bluetooth pairing within 5 minutes,  if the connection is not made within 5 minutes, the headset will automatically shut down. You need to put the earphones into the charging box and close the cover, please refer to step 1 for the re-operation.

When using headphones, please turn off the sound effect mode of the mobile phone music player to achieve the best sound quality.

Instructions for use

1.  Power on: open the charging compartment, and the headset will automatically power on.
2. Shutdown: put the earphones into the charging compartment, and automatically shut down and charge after closing the cover.
3. Answer/hang up: when there is an incoming call or during a call, click and touch the headset to answer the call or hang up the call.
4. Reject the call: press and hold the earphone for 3 seconds when there is an incoming call.
5. Play/pause: click the left or right ear touch area.
6. Switch songs: double-click the left ear to switch to the previous song, double-click the right ear to switch to the next song.
7. Game mode/music mode switching: four consecutive taps to touch the left ear.
8. Wake up Siri: touch the right ear four times in a row.
9. Adjust the volume: tap the left ear three times in a row to decrease the volume; tap the right ear three times in a row to increase the volume.

Charging instructions

1. Please charge in time when the green light of the charging compartment is flashing.The orange light flashes when charging and stays on when fully charged.
2. Connect one end of the USB charging cable to the Type-c charging  input interface, and the other end to the USB port of the power adapter.
3. When the power of the left and right earphones is low, a low battery warning tone will be reported. Please put the headset into the charging box and close the cover to charge. The green light is always on during™ charging, and the green light turns off when it is fully charged.
4. This product is sold without an adapter.If consumers use a power adapter for charging, they should purchase a supporting power adapter that has obtained CCC certification and meets the standard requirements
5. When there are foreign objects on the earphone charging interface and the contact is poor, please use a cotton swab dipped in alcohol to gently wipe and clean the earphone charging interface.

Product parameters

• Product name: TWS bluetooth headset
• Material: ABS
• Bluetooth version: 5.3
• Bluetooth receiving distance: about 10 meters
• Headphone charging time: about 1H
• Charging bin charging time: about 2H
• Call time: about 4H
• Playing time: about 5H
• Headphone battery capacity: 30mAH
• Charging compartment battery capacity: 300mAH
• Frequency range: 20Hz-20kHz
• Speaker sensitivity: 109+2db
• Working temperature: 0°C-45°C
• Support AAC, BC high-quality audio decoding
• Executive standard: GB8898-2011
• Radio approval certificate code: CMIITID: 2023DP1389

*According to the company’s business development, the product’s functional parameters and picture content may be adjusted at any time. SOAlY cannot guarantee that the elevant packaging and manuals will be updated in a timely manner. Customers are subject to the actual use of the functions and content.

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuan t to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterferenc e to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or reloca te the receiving antenna.
• Increase the separation between the equi pment and receiver.
• Connect the equipment into an outlet on a circuit different f rom that to which the receiver is c onnected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference r eceived, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>