WAHL 9818 Stainless Steel Lithium Ion Rechargeable Trimmer Instructions

: June 5, 2024
: WAHL

Table of Contents

WAHL 9818 Stainless Steel Lithium Ion Rechargeable Trimmer
IMPORTANT SAFEGUARDS
For Products Marked with an FCC Approval:
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

WAHL 9818 Stainless Steel Lithium Ion Rechargeable Trimmer

IMPORTANT SAFEGUARDS

When using your electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS AND SAFEGUARDS BEFORE USING THIS APPLIANCE.

DANGER
To reduce the risk of death or injury by electric shock:

Except when charging, always unplug the charger from the electrical outlet and from the appliance. The appliance will not operate (run) when plugged into the charger.
Always unplug this appliance before cleaning.

WARNING
To reduce the risk of burns, electrical shock or injury to persons:

Do not crush, disassemble, heat above 100°C (212°F), or incinerate the appliance, due to risk of fire, explosion, or burns.
This appliance can be used by children aged 14 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction, by a person responsible for their safety, concerning the use of the appliance in a safe way and understand the hazards involved. Children should be supervised to ensure that they do not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
Never operate this appliance if it has a damaged cord or plug if it is not working properly, if it has been dropped or damaged, or if it has been dropped into water. Return the appliance to Wahl Clipper Corporation for examination and repair.
Keep the cord away from heated surfaces.
Do not use outdoors or operate while aerosol (spray)
Never drop or insert any object into any opening.
Do not use this appliance with a damaged or broken comb nor with teeth missing from the blades, as injury may occur. Before use, make certain blades are aligned properly. (See Clipper Maintenance Instructions. May not be applicable for all appliances.)
During use, do not place or leave the appliance where it is expected to be subject to damage by an animal, or exposed to the weather.
Always attach plug to appliance first, then to outlet.
To disconnect, turn all controls to “OFF” (e.g. “0”), then remove the charger from the outlet.
Turn all controls to “OFF” (e.g. “0”), before placing on or removing blades or attachments.
For the purpose of recharging the battery, only use the detachable power supply unit (charger) provided with this appliance.
This charger is intended to be correctly orientated in a vertical or floor mount position.
Detach the hand-held part from the charger supply cord before cleaning it in water.

For Household Use Only
This symbol, located on the shaver/trimmer, represents that the shaver/trimmer is suitable for use in the bath and shower.

For Products Marked with an FCC Approval:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

Our units are quality tested with hygienic fibers. Any residual fibers do not affect performance and can be brushed off.