WAHL 8786-1001 Horse Cordless Clipper Kit Operating Instructions

: March 22, 2024
: WAHL

Table of Contents

WAHL 8786-1001 Horse Cordless Clipper Kit
Description of parts
Important safety information
Start-up
Operation
Cutting-length adjustment
Cleaning and general care
Changing the blade-set
Disposal in EU countries
FAQs
Video-WAHL 8786-1001 Horse Cordless Clipper Kit
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WAHL 8786-1001 Horse Cordless Clipper Kit

Description of parts

A Blade-set
B On/off switch
C Charge indicator
D Battery pack
E Charging stand
F Cable compartment
G Attachment-comb, 3 mm cutting-length
H Attachment-comb, 6 mm cutting-length
I Attachment-comb, 9 mm cutting-length
J Attachment-comb, 12 mm cutting-length
K Interchangeable battery pack
L Charge indicator
M Cleaning brush
N Oil for blade-set

This cordless hair clipper is supplied with 2 battery packs. While the appliance is being used, the second battery pack can be recharged on the charging stand. This means that the hair clipper is always ready for use.

Important safety information

For your protection from injuries and electric shocks, the following information must be observed when using electrical equipment:
Read all the instructions before using the appliance!

Only use hair clippers to cut human hair. Only use animal clippers to cut animal hair and animal fur.
Only connect the appliance to an AC mains power supply. Note the rated voltage on the rating plate.
Never touch electrical equipment that has fallen into the water. Disconnect from the mains immediately.
Never use electrical equipment in the bath or under the shower.
Always position or store electrical equipment where it cannot fall into water (e.g. washbasin).
Prevent electrical equipment from coming into contact with water and other liquids.
Always disconnect the appliance from the power supply immediately after use except when charging.
Disconnect the appliance from the power supply before cleaning.
This appliance is not suitable for use by people (including children) with physical, sensory, or mental disabilities or who do not have the relevant experience or knowledge of using such appliance, unless under the supervision of or after having received instruction in the use of the appliance by an individual who is responsible for their safety. Children should be supervised to ensure they do not play with the appliance.
Only use the appliance for the proper use as described in the operating instructions. Only use accessories recommended by the manufacturer.
Never use the appliance if the main cable is damaged. Furthermore, do not use the appliance if it is not working correctly, if it is damaged, or if it has fallen into water. In these cases, send the appliance to our Service Centre for inspection and repair. Only specialists properly trained in the handling of electrotechnical devices may repair electrical equipment.
Do not hold the appliance by the main cable to carry it, and do not use the cable as a handle.
Keep the appliance away from hot surfaces.
Make sure that the mains cable is not twisted or kinked when charging or storing.
Never insert or allow objects to fall into the openings of the appliance.
Only use and store the appliance in dry rooms.
Never use the appliance where aerosol (spray) products are being used or where oxygen is released.
To prevent injuries, never use the appliance if the blade set is damaged.
Only use an original battery pack with temperature protection.
Before the appliance is used for the first time, it should be charged for approx. 2.5 hours.
The appliance is safety-insulated and radio-screened. It meets the requirements of EU Directive 2004/108/EC regarding electromagnetic compatibility and EC Low Voltage Directive 2006/95/EC.

NiMH
Exhausted batteries/rechargeable batteries should not be disposed of in household waste.
Dispose of them by legal regulations.

Start-up

The battery-powered clipper contains a removable battery pack.
Before the appliance is used for the first time, the battery pack should be charged for 2.5 hours.
Connect the battery charger to the mains.
Press the unlock buttons on the side and remove the battery pack (Fig. 1a).
Insert the battery pack into the recess of the battery charger. The red charge indicator light (L) on the charger (E) lights up.
After the charging process has been completed, the charge indicator light (L) on the charger (E) will start blinking.
Remove the battery pack from the charging stand and insert it into the appliance until you hear it snap into place (Fig. 1b).
The battery only needs to be recharged when the battery power indicator (C) on the hand-held appliance lights up during operation. In this case, the remaining capacity is still approx. 15%. It should take around 2,5 hours for the appliance to charge to full capacity. The second battery can remain in the charging stand. This way, a charged battery pack is always available.
With the battery fully charged, the clipper can be operated for approx. 100 minutes.
Note: In case of insufficient maintenance of the blade set, the operating time can be reduced considerably.

Operation

Switch on the appliance using the on/off switch (Fig. 2a) and, after use, switch it off again (Fig. 2b).
When pressing the slide switch, the control light will light up briefly, indicating the readiness of the appliance.

Cutting-length adjustment

The cutting-length adjustment integrated into the blade set has five settings to determine the length of the hair from 0,7 mm (a) to 3 mm (b) (Fig. 3a/b). Move the adjusting lever to the required position and click it into place.

Attaching/removing the attachment-comb

Position the attachment comb on the cutting edge of the blade set and press it down onto the blades towards the housing until it clicks (Fig. 4a).
The attachment comb can easily be removed by pushing it in the direction of the arrow (Fig. 4b).

Cutting with attachment combs
The appliance can also be operated with attachment combs. To achieve the desired cutting length, the cutting length adjustment lever has to be set to position 1 (Fig. 3a). The following attachment combs are supplied with the appliance: 3 mm, 6 mm, 9 mm, and 12 mm cutting length. Attachment combs (18 mm and 25 mm) are optionally available.

Cleaning and general care

Never immerse the appliance in water.
Remove the attachment comb after each use and remove residual hairs from the housing opening and blade set using the cleaning brush. First, remove the blade set (Fig. 5a) and press the cleaning lever (Fig. 6). This makes it easy to remove residual hairs from between the top blade and bottom blade with the cleaning brush (EASY CLEANING).
The charging contacts on the appliance and charging stand must always be kept clean.
Only wipe the appliance with a soft or slightly damp cloth. Never use solvents or scouring agents.
The blade set may be cleaned with a hygienic spray order no. 4005-7051. Do not use any other cleaning agent.
The blade set should be oiled frequently (daily) to maintain its good cutting performance and thus ensure a long service life (Fig. 7). Only use blade set oil order no. 1854-7935 (200 ml).
Blade set oil and hygienic spray are available from your dealer or our Service Centre.
The blade set should be replaced if the cutting performance is reduced after extended use, despite regular cleaning and lubrication.

Changing the blade-set

Switch off using the on/off switch (Fig. 2b).
The blade set can be removed by sliding it away from the housing in the direction of the arrow (Fig. 5a).
To replace the blade set, position it with the hook in the slot on the housing and press until it clicks into place (Fig. 5b).

Disposal in EU countries

Do not dispose of the appliance with the domestic refuse. As part of the EU Directive governing the disposal of electrical and electronic equipment, the appliance is accepted free of charge by local waste collection points or recycling centers. Correct disposal will ensure environmental protection and prevent a potentially harmful impact on people and the environment.

Disposal in non-EU countries

At the end of its service life, please dispose of the hairdryer by statutory requirements.
Switch on the appliance to discharge the battery completely.
Press the release buttons at the side and remove the battery pack (Fig. 1a). Insert a screwdriver into the slot on the battery pack and lever off the cover.
Remove the entire PCP and then lift each of the battery cells from the board at the plug-in contact and then remove from the other end.
Batteries should be disposed of at an appropriate collection point

FAQs

What is the model number of the WAHL cordless clipper kit for horses?

The model number of the WAHL cordless clipper kit for horses is 8786-1001.

Can the WAHL 8786-1001 Horse Cordless Clipper Kit be used on dogs and cats as well?

Yes, the WAHL 8786-1001 Horse Cordless Clipper Kit can be used on dogs, cats, and horses.

What color is the WAHL 8786-1001 Horse Cordless Clipper Kit available in?

The WAHL 8786-1001 Horse Cordless Clipper Kit is available in purple.

Are the blades of the WAHL 8786-1001 Horse Cordless Clipper Kit adjustable?

Yes, the blades of the WAHL 8786-1001 Horse Cordless Clipper Kit are fully adjustable from #9 to #40.

Is the WAHL 8786-1001 Horse Cordless Clipper Kit a corded or cordless device?

The WAHL 8786-1001 Horse Cordless Clipper Kit is a cordless clipper.

What are some key features of the WAHL 8786-1001 Horse Cordless Clipper Kit?

The key features of the WAHL 8786-1001 Horse Cordless Clipper Kit include its cordless design, adjustable blades, and suitability for various animals.

Does the WAHL 8786-1001 Horse Cordless Clipper Kit come with different blade attachments?

Yes, you can use different blade attachments with the WAHL 8786-1001 Horse Cordless Clipper Kit depending on the desired hair length.

Can you outline the main features of the WAHL 8786-1001 Horse Cordless Clipper Kit?

Certainly, the WAHL 8786-1001 features cordless operation, precision blades, multiple attachment combs, and a powerful motor for efficient grooming of horses.

Can you describe the battery life of the WAHL 8786-1001 Horse Cordless Clipper Kit?

The WAHL 8786-1001 typically offers extended battery life, providing uninterrupted grooming sessions for horse owners.

How does the WAHL 8786-1001 Horse Cordless Clipper Kit compare to corded clipper models?

The cordless design of the WAHL 8786-1001 provides greater freedom of movement and eliminates the hassle of cords during grooming sessions.

What safety measures are recommended when using the WAHL 8786-1001 Horse Cordless Clipper Kit?

It is important to follow safety guidelines such as avoiding contact with water, using the clipper only for its intended purpose, and supervising its use around animals.

Can the WAHL 8786-1001 Horse Cordless Clipper Kit be used for other animals besides horses?

While designed specifically for horses, some users may find it suitable for grooming other large animals with similar coat types.

What accessories are included in the WAHL 8786-1001 Horse Cordless Clipper Kit?

The kit typically includes attachment combs, a cleaning brush, blade oil, and a charging stand for added convenience.

Can the WAHL 8786-1001 Horse Cordless Clipper Kit be used by professional horse groomers?

Yes, it is suitable for both amateur horse owners and professional groomers, offering reliable performance and durability.

How does the WAHL 8786-1001 Horse Cordless Clipper Kit contribute to maintaining the health and appearance of horses?

Regular grooming with the WAHL 8786-1001 helps to keep horses' coats clean, healthy, and aesthetically pleasing.

Can the WAHL 8786-1001 Horse Cordless Clipper Kit be used for both trimming and full-body grooming?

Yes, it is versatile enough to handle various grooming tasks, from touch-ups to complete grooming sessions for horses.