Hawk R260TF Expert 2.4GHz Wireless Presenter User Guide
- June 5, 2024
- Hawk
Table of Contents
Hawk R260TF Expert 2.4GHz Wireless Presenter
OVERVIEW
- STEP Inserting the Battery Open the batter cover and insert 2x AAA Battery.
- STEP Connecting the Receiver Connect the USB connector of the receiver into an available USB port of your computer.
- STEPS Open the Powerpoint file and test the key functions
Trouble Shooting
Note: When The receiver is plugged into the presenter,the power cutoff automatically.
Care and Maintenance
- For cleaning, you are advised to use a soft, slightly moistened cloth.
- Avoid using solvents or abrasive substances
- Do not open the presenter: for maintenance, consult.aualiffed.staff.onlv
FCC Requirement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Product Features
Package contents
- Wireless 2.4GHz L
- User Presenter x1
- User S Manual x 1
- AAA Battery x 2
- Warranty Card x 1
Minimum System Requirements
Windows 985E/ 2000 / ME /XP /Vista /7/8 or Above,Mac OS X v.10.4 (or later)
IBM or PC Compatible or Notebook with USB port
Switching Channels Plug receiver to your PC USB port Within the 20-second
stand-by time, press A and V simultaneously 2 seconds until the red LED of
Status indicating becomes blinking for 2 times, the ID link has been
successfully done This is a plug-and-play device. Normally, it is not
necessary to setup the RF Channel. happens, then you must switch the
connection RF channel. Please do the following steps:
Reseated the receiver.
Safety Notice
1. This product complies with FCC and CE rules.
2. This product has no serviceable parts. Use of controls or adjustments of
procedures other than the user guide may result in danger.
Specifications
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>