Televes MOSAIQ6 Multi-Touch Meter/Analyser User Guide
- June 5, 2024
- Televes
Table of Contents
Televes MOSAIQ6 Multi-Touch Meter/Analyser
Multi-touch Meter/Analyser
Registration process
irst of all, please, register yourself on our You will need your user name and
password website https://register.televes.com/). to register your MOSAIQ6.
Follow the steps shown in the screen. Further details in the user
manual.
- Device ON/OFF button: To turn the equipment off, press and hold for more than 3 seconds. If the MOSAIQ6 is ON, press ON/OFF button to enable/disable the touch-screen
- Menu button: First press: features menu is shown. Second press: context menu is shown. Third press: all menus are hidden
- Up/Down buttons: Changes channel
- Left/Right buttons: Changes screen in multi-screen features
- OK button: Selects an option
Gestures
- Tap: one fast touch one with finger
- Select menu/option/check.Double-tap: two fast consecutive
- touches with one finder widget <=> Fullscreen.
- Swipe: short swipe with one finger
- Shows menus (see section 8.-Menus)
- Spectrum => changes channel.
- Drag: drag with one finger
- Main menu wheel = > feature search.
- TV and Radio Analyser = > switches between screens.
- Spectrum/Echoes/Measurements=> moves markers.
- Pinch/Spread: pinch/spread two fingers on the screen
- Spectrum => changes span.
- Constellation => zoom in/out. Drag and drop
- Spectrum => changes tuned
- channel, dropping it to the center of the spectrum.
Menus
Top menu
(swipe on the top-central part of the screen)Access to:
- Inputs/outputs
- Powering
- Settings (brightness, volume, headphones,
- GPS, network, Wi-Fi)
Main menu
(swipe on the right-central side of the screen)Access to:
- Settings
- User profiles
- Features
- LOGs
Top menu
(swipe on the left-central part of the screen)Access to:
- Specific options of each feature
Battery pack replacement
- Disconnect the meter from the power supply:
- Turn the meter off:
- The battery pack is placed in the bottom-backside:
- Lift the fixings washers and rotate them 90º. You’ll notice that the fixings get out automatically allowing to remove the battery pack:
- Put the new battery pack and rotate fixings washers again until the fixings fit into the device:
- Turn your MOSAIQ6 on:
Reset
Safety
Documents / Resources
|
Televes MOSAIQ6 Multi-Touch
Meter/Analyser
[pdf] User Guide
MOSAIQ6, Multi-Touch Meter Analyser, MOSAIQ6 Multi-Touch Meter Analyser
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>