IIIF150 H2022 Smart Phone User Manual

IIIF150 H2022 Smart Phone

For your safety

Please read this manual before using the cell phone to ensure your safety and proper use.

• SWITCH OFF IN HOSPITALS
  Please abide by relevant provisions or regulations. Please turn off your mobile phone near medical equipment.

• SWITCH OFF WHEN REFUELING
  Don’t use the phone at a refueling point. Don’t use near fuel or chemicals.

• SIM CARDS AND TF CARDS ARE PORTABLE
  Keep your phone, phone parts and accessories out of children’s reach.

• BATTERY
  Please do not destroy or damage the battery, it can be dangerous and cause fire. Please do not throw the battery in fire to avoid hazards. When the battery cannot be used, please dispose of in safe environment. Do not try to dismantle the battery. If the battery or authorized charger is broken or old, please stop using them, and replace them with a certified genuine battery.

• USE QUALITY EQUIPMENT
  Use authorized equipment to avoid danger.

• ROAD SAFETY COMES FIRST
  Give full attention while driving, and Park before using your phone. Please follow traffic rules of the local city town.

• INTERFERENCE
  All wireless devices may be susceptible to cause interference, which could affect performance.

• SWITCH OFF IN AIRCRAFT
  Wireless devices can cause interference in aircraft. It’s not only dangerous but also illegal to use a mobile phone in an aircraft.

Learn about the phone

Overview

1. Card Tray
2. F150 Key
3. Headset
4. Light Sensor
5. Receiver
6. Front Camera(5M
7. Touch screen
8. USB interface
9. Microphone
10. Volume Key
11. Power Key
12. Photo flash
13. Rear Camera(13M)
14. peaker

Function Keys

Power Key

| Ÿ   Press to turn on/off the screen.

Ÿ   Press and hold to reboot, power off the phone, and screenshot.

Volume Key| Ÿ   Press to adjust the volume of device.
Home Key

(on the screen)

| Ÿ   Tap to return to Home screen.
Back Key

(on the screen)

| Ÿ   Tap to return to the previous screen.
Fingerprint key| Ÿ   Press to unlock the phone.
F150 Key （ SOS ）| Ÿ   Click 5 times to enter SOS mode.

Note
Multi-Task Key and Back Key can be exchanged the layout in Settings –> Navigation bar. You can customize the navigation bar.

Before using

The phone is a Dual SIM mobile that allows you to use two mobile networks.

Insert SIM cards and TF card
Stick into the pinhole with the eject tool, and then the card tray will be out of the phone.

1. Insert the Nano-SIM cards and TF card to the card slots correctly.
2. Card 1 supports Nano SIM1 card.
3. Card 2 supports Nano SIM2 card or TF card.

Note:

• Do not remove the cards while the device is transferring data. Doing so may cause data to be lost or damage to the cards and device.
• The SIM cards and TF card are small parts. Please keep away from Children to avoid swallowing the card by accident.
• Please do not touch the metal surface of SIM and TF cards and keep them away from the electromagnetic field to avoid damaged data.

Charge the Battery

Charge the battery before using it.

Getting started

Basic Function

• Turn on the phone
  Press and hold the power key for a while to turn on the phone.

• Turn off the phone
  Long press the power key until a menu shows. Choose “Power off’’ to turn off the phone.

• Restart the phone
  Option 1: Long press the power key until a menu shows. Choose “Reboot’’ to restart the phone.
  Option 2: Long press the power key till 13 seconds to auto restart the phone automatically.

• Lock the screen
  Option 1: Press the power key to turn off the screen and lock it.
  Option 2: The screen will auto-lock if you don’t use the phone for a while.

• Unlock the screen
  Press the power key for unlocking.

Warnings and notes

Operational Warnings
Important information on safe and efficient operation. Read this information before using your phone. For the safe and efficient operation of your phone, observe these guidelines: Potentially explosive at atmospheres: Turn off your phone when you are in any areas with a potentially explosive atmosphere, such as fueling areas (gas or petrol stations, below deck on boats), storage facilities for fuel or chemicals, blasting areas and areas near electrical blasting caps, and areas where there are chemicals or particles (Such as metal powders, grains, and dust) in the air.
Interference to medical and personal Electronic Devices: Most but not all electronic equipment is shielded from RF signals and certain electronic equipment may not be shielded against the RF signals from your phone.
Audio Safety: This phone is capable of producing loud noises which may damage your hearing. When using the speaker phone feature, it is recommended that you place your phone at a safe distance from your ear.

Other Medical Devices, hospitals: If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
Product statement on handling and use: You alone are responsible for how you use your phone and any consequences of its use.
You must always switch off your phone wherever the use of a phone is prohibited. Use of your phone is subject to safety measures designed to protect users and their environment. Always treat your phone and its accessories with care and keep it in a clean and dust-free place. Do not expose your phone or its accessories to open flames or lit tobacco products. Do not expose your phone or its accessories to liquid, moisture, or high humidity. Do not drop, throw, or try to bend your phone or its accessories. Do not use harsh chemicals, cleaning solvents, or aerosols to clean the device or its accessories. Do not attempt to disassemble your phone or its accessories; only authorized personnel can do so. Do not expose your phone or its accessories to extreme temperatures, minimum 32℉and maximum 104℉(0℃ to 40℃).

Battery: Your phone includes an internal lithium-ion or lithium-ion polymer battery. Please note that use of certain data applications can result in heavy battery use and may require frequent battery charging. Any disposal of the phone or battery must comply with laws and regulations pertaining to lithium-ion or lithium-ion polymer batteries.
Faulty and damaged products: Do not attempt to disassemble the phone or its accessory. Only qualified personnel can service or repair the phone or its accessory. If your phone or its accessory has been submerged in water, Punctured, or subjected to a severe fall, do not use it until you have taken it to be checked at an authorized service center.

Safety information

Do not use the mobile phone in an environment at too high or too low a temperature, never expose the mobile phone to strong sunshine or too wet environment. The maximum operating ambient temperature of the equipment is 40℃. Excessive sound pressure from earphones and headphones can cause hearing loss. To prevent possible hearing damage, do not listen at high volume levels for long periods.

Waste Electrical and Electronic Equipment (WEEE)
This symbol means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. Proper recycling of your product will protect human health and the environment.

Accessory information

Charger: 5V/1A
Battery: 4800mAhmAh
All software versions released by the manufacturer have been verified and are still compliant with the related rules.

FCC  STATEMENT

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: ( 1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
15.21 Information to the user. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 15.105 Information for the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connecting the equipment to a socket on a circuit is different from that to which the receiver is connected.
• Contact the provider or a radio f TV technician for help.

Specific absorption rate (SAR):

This Smart Phone meets the government’s requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluations of scientific studies. The standards include a margin of safety designed to ensure the safety of all people regardless of their age or health. The FCC Statement of Exposure to RF and the SAR limit for the United States (FCC) is 1.6 W/kg average for each gram of tissue. This device was tested for typical operations of use on the body, with the back of the Smart Phone at l0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a distance of 10mm between the user’s body and the back of the Smart Phone. The use of belt clips, covers, and similar accessories must not contain metallic components in their assembly. The use of accessories that do not meet these requirements may not meet FCC RF exposure requirements and should be avoided.
Functioning in the body
This device was tested for typical operations of use in the body. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the Smart Phone, including the antenna. Third-party accessories such as belt clips. covers and similar accessories used with this device should not contain metallic components, accessories that do not meet these RF exposure requirements and should be avoided from use on – the body. Use only the body. Use only the supplied antenna or an approved antenna supplied antenna or an approved antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>