JAM HX-TT700 Sound Stream+ Turntable User Manual

: June 5, 2024
: JAM

JAM HX-TT700 Sound Stream+ Turntable

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions – All the safety and operating instructions should be read before this product is operated.
Keep these instructions- The safety and operating instructions should be retained for future reference.
Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
Follow all instructions -All operating and use instructions should be followed.
Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use® caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug the apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
The mains plug is used as disconnect device, the disconnect device shall remain readily operable.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall not be placed on apparatus.
The use of the equipment in moderate climate.
WARNING: Please refer the information on exterior bottom enclosure for electrical and safety information before installing or operating the apparatus.
Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
The minimum distance around the apparatus for sufficient ventilation is 1.9 inches (5 cm) and should not be impeded by covering the ventilation openings with items such as
newspaper, tablecloths, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on the apparatus
The symbol with”- indicate AC voltage.
The symbol with indicate DC voltage.
l□I Class II equipment.
0 For indoor use only.
Polarity of d.c. power connector.
WARNING: Only the accessories (such as external power supply) provided by the manufacturer can be used with the product.
This equipment is not intended to be used on soft supports (such as bedding, blankets, etc.).
The adaptor is used as disconnect device, the socket-outlet shall be easily accessible.
Efficiency marking

Precautions

Safety Information-caution:

In order to shut off power to this product completely, unplug the power cord from the wall outlet. Be sure to unplug the unit if you do not intend to use it for an extended period of time, such as during a vacation.
Use of controls, adjustments and performance of procedures other than those specified herein may result in hazardous radiation exposure.
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
If this product is experience problems during operation, contact qualified service centers, and do not use the product in defective states.

Safety Precautions
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION:
Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposures.

Before Use

Choose unit installation location carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, cold or moisture. Keep away from sources that hum, such as transformers or motors.
Do not open the cabinet as this may result in damage to the circuitry or electrical shock. If a foreign object should get into the set, contact Customer Service.
Be sure not to handle record with dirty fingers. Never play a record that has a crack on the surface.
When removing the power plug from the wall outlet, always pull directly on the plug, never pull the cord.
To protect the stylus, don’t forget to put on the white protective needle cover after use.
Do not attempt to clean the unit with chemical solvents as this might damage the finish.Use a clean, dry cloth.
In order to shut off the power to this product completely, unplug the power cord from the wall outlet. Be sure to unplug the unit if you do not intend to use it for an extended period of time, such as a vacation.
Keep this manual in a safe place for future reference.

Top view

| ITEM| DESCRIPTION

---|---|---
1| 45RPM adaptor| Snap into a 45 RPM record so that it fits the spindle.
2| Spindle| Placea record onto the spindle to play.
3| Tone arm lifter| Push forward and pull back to raiseand lower tone arm.
4| RPM selector

switch

| Turn to select the record type :33,45,78.
5| Tone arm| Holds the stylus that produces sound from t he record.
6| Tone arm rest

holder

| Placethe tone arm on this holder when not in use.
7| Stylus| Generatessound from aplayingrecord.

Front view

JAM-HX-TT700-Sound Stream+-Turntable-2

| IT E M| D E SCR I PTION

---|---|---
1| Bluetooth

indicator

| Blinking blue indicates Bluetooth is in pairi ng mode.

Solid blue indicates Bluetoo th is connected.

2| Headphone jack| Plug headphone into thi s jack.
3| Power indicator| Pow er on th e un it, the red indicator is on.

Pow er off the un,it the indicator is turn o ff .

4| Bluetoothbutton| When the power on, press this button will open the Bluetooth transmit function. When you want to turn off the Bluetooth transmit function, please long press this button until the blue

indicator turn off.

5| Volume knob| Turn this knob to adjust t he volum e.

Rear view

JAM-HX-TT700-Sound Stream+-Turntable-3

| I TEM| DESCRIPTION

---|---|---
1| RCA o utpu t socket| Plug the i ncluded RCA audi o cabl e i nto t hese jack. M atch re d to

red and white to white.

Powering Your Turntable

You can power the turntable with the supplied AC/DC adapter. Check the rating plate on the AC/DC adapter with your mains power voltage before powering the turntable on.
Press the POWER button to turn on the unit.

Using your turntable

We strongly recommended that you operate your turntable only from the type of power source indicated on the marking label.
To prevent interference, avoid bundling the audio signal cables together with the AC power cord.
The top cover helps prevent dust from settling on your turntable. We recommend that you use the top cover when you’re playing records or when you’re not using your turntable.

Playing a record

Press the power button on the back to turn on the turntable.
Gently open the top cover.
Note : Be careful not to pinch your finger when opening or closing the top cover.
Place a vinyl record on the turntable.
Note: When playing a 45RPM record, use the included 45 RPM adaptor.
Select the appropriate speed by adjust the RPM selector switch to 33, 45 or 78.
Remove the tone arm-rest lock catch to release the tone arm.
Remove the white protective needle cover. Keep this in a safe place, you’ll need to put it back when you’re finished.
Push the tone arm lifter forward to raise the tone arm.
Gently push the tone arm to the left over the turntable.
Push the tone arm lifter backward to lower the tone arm so that the stylus touches the record
To pause or stop playing, push the tone arm lifter forward to raise the tone arm.

Listening to music using Bluetooth speakers

Turn the switch to your record type, 33, 45 or 78.
Put your Bluetooth speaker in pairing mode.
On the turntable, press the Bluetooth button to turn the Bluetooth transmitter on. While searching, the Bluetooth indicator flashes blue. When connected successfully, the Bluetooth indicator lights solid, and your turntable sounds a tone.
To disconnect the Bluetooth connection, press and hold the Bluetooth button until the blue indicator turn off.

Listening to music through the AUX in

An external (auxiliary) audio source can be connected to this unit and heard through the Bluetooth transmitting or Line out function.

Plug one end of the AUX cable (not included) into the AUX IN socket on the back of the unit.
Plug the other end or the cable into the headphone .
Turn on the external audio device and press PLAY to start playing the music.
Adjust the volume on the external audio device.

Use the headphone

Connect a set of headphone (not included) on the Earphone socket on the front panel of the unit.
Put on the headphone and slowly increase the volume until you can hear it clearly and comfortably without distortion.
NOTE : Never put on the headphone till you have plugged in the headphone plug and turn down the volume level.

USB TO PC Recording

To properly record your vinyl to MP3 via computer, use the included USB Output Cable and instructional CD Software. connect one end or the USB cable to the turntable (USB jack on the back or the unit) and the other end into your computer. Then connect the AC/DC adaptor into DC IN socket, and turn the unit on. To install and use the software on your computer, select the proper Mac or PC install files, then follow the prompts provided on the Instructional CD. For the most up to date manuals, software,instructional details, troubleshooting or other downloadable content, please go to http://audacityteam.org

TROUBLESHOOTING GUIDE

In case of trouble with the unit, please look through below and see if you can solve the problem by yourself before calling your dealer.

Prob lem	Cause	Solution
Power does not come on	Unit is unplugged.	Plugs the DC plug or AC/DC adap

used for a period of time.

| The stylus is damaged.| Pleasechange a new stylus.

SPECIFICATIONS

Power Source: AC/DC Adaptor:

Power consumption9W
Dimensions (W x D x H)390 x 346x 130 mm (approx)
RECORD PLAYER section
Motor DC servo motor
Drive SystemBelt Drive
SpeedsOff/33-1/3 rpm, 45 rpm, 78rpm
S/N Ratio.55 Db (AUX-IN}
RCA OUT200-280 mV (5 cm/sec at 1 KHz-lOdB)
Stylus M02-M208-165
Cartridge Type Ceramic Stereo Cartridge
BLUETOOTH TRANSMIT
Bluetooth Version Bluetooth VS.1
Bluetooth Profiles A2DP, AVRCP
Bluetooth Frequency range 2.402GHz-2.480GHz
Operating Distance l0meters (33ft.)
The maximum RF Power: 2.838mW

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply wtth the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged lo try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radionic technician for help.

WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
The device must not be co-located or operating in conjunction with any other antenna or transmitter. To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20cm from nearby persons.