JAM Live Free Earbuds HX-EP909 Instruction Manual

Live Free Earbuds HX-EP909

Instruction Manual

CONTENTS

A – 2 earbuds
B – Portable charging case
C – 3 sizes of eartips, 4 sizes of wings
D – Micro USB cord
E – Welcome card
F – Legal card

CONTROLS

A – Power on/off/play/pause button
B – Earbud status light
C – Earbud charging contacts
D – Micro USB charging port – to charge the portable case

SET UP

CHARGING YOUR EARBUDS
To charge your earbuds, place them into the portable case. The red LEDs show that they are charging. If the red LEDs do not appear when placed in the case, adjust the earbuds to make sure they are in line with the charging contacts. When fully charged, the LEDs will shut off. It will take approximately 2 hours to charge.

CHARGING YOUR PORTABLE CASE
Plug the small end of the micro USB cable into the micro USB port, located on the right side of the case. The LED on the case will show solid red when charging. When the portable case is fully charged, the three LED lights will remain on. Once the USB cord is unplugged, the lights will turn off.

CONNECT BOTH EARBUDS

STEP 1 – TURNING ON THE EARBUDS
Your earbuds will automatically turn on when taken out of the portable charging case. If you need to turn them on manually, you can long-press the “play/pause” for 3 seconds on both earbuds.

STEP 2 – CONNECTING THE EARBUDS TO EACH OTHER
When you take the earbuds out of their case, they will automatically sync to each other. The master earbud (left) LED will flash blue and red alternatively, while the slave earbud (right) LED will slow flash blue. Your earbuds are now in pairing mode and searching for a Bluetooth® device to connect to.

If your earbuds don’t sync to each other automatically, long-press the “play/pause” button on both earbuds at the same time. This will put your earbuds into sync mode, and the LEDs will pulse blue once they are connected. Once the earbuds connected, the master earbud (left) LED will flash blue and red alternatively, while the slave earbud (right) LED will slow flash blue. Your earbuds are now in pairing mode and searching for a Bluetooth® Device to connect to.

STEP 3 – CONNECTING TO A DEVICE
Enable Bluetooth® on your device. From the Bluetooth® menu, select “Jam Live Free” When the device and Live Free are connected, you will hear a tone and the LED’s will slow flash blue. This means pairing is complete.

CONNECT 1 EARBUD

Connect the left earbud for mono sound.
This is a great option if you want to hear your surroundings as well as your music.

STEP 1 – TURNING ON THE EARBUD
Your earbud will automatically turn on when taken out of the portable charging case. If you need to turn it on manually, you can long-press the “play/pause” button for 3 seconds on the earbud.

STEP 2 – PAIRING MODE
Once the left earbud is taken out of the case or manually turned on, it should enter into pairing mode. The LED will flash red and blue. This will indicate your earbud is in pairing mode with your device. If it does not enter pairing mode automatically, press and hold the “play/pause” button on the earbud for 2 seconds and the LED will flash red and blue.

STEP 3 – CONNECTING TO A DEVICE
Enable Bluetooth® on your device. From the Bluetooth® menu, select “JAM Live Free.” When the device and JAM Live Free are connected, you will hear a tone and the LED’s will slow flash blue. This means pairing is complete.

TURNING OFF YOUR EARBUDS

To turn off your earbuds, place the earbuds back in your case, or press and hold the “play/pause” button on the earbuds for 5 seconds.

USING YOUR PORTABLE CHARGING CASE
With a full charge, your portable case can recharge your earbuds up to 8 times, giving you up to 54 hours total of listening time.

LED INDICATORS

EARBUDS IN CHARGING CASE

PORTABLE CHARGING CASE

EARBUDS IN USE

Master (left earbud) flash blue and red alternatively, Slave (right earbud) slow flash blue| Earbuds in sync with each other and in pairing mode
---|---
Slow flash blue| Paired with device

EARBUDS IN MONO USE

BASIC FUNCTIONS

MUSIC

CALLS

OTHER

TROUBLESHOOTING

1. Turn off Bluetooth® on your device.
2. Take earbuds out of your case.
3. Press and hold “play/pause” button for 5 seconds on both earbuds to turn them off.
4. Long press the “play/pause” button once on both earbuds for 6-8s. You will see the blue LED flash three times and then be powered on automatically.
5. Earbuds will automatically go into pairing mode once they are powered on. The master earbud (left) LED will flash blue and read alternatively, while the slave earbud (right) LED will slow flash blue.
6. Turn on Bluetooth® on your device.
7. Pair to “JAM Live Free”
8. Earbuds not disconnecting from your device? The Live Free earbuds may automatically connect to your device if put in a charging case that has no battery left. For the best experience, periodically charge the case to ensure that it always has battery life.

LEGAL INFORMATION

READ ALL INSTRUCTIONS BEFORE USE AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

FCC RF Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC Caution:
This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

ISEDC RF Exposure Statement:
The device is in compliance with RF exposure guidelines; users can obtain Canadian information on RF exposure and compliance.

1-YEAR LIMITED WARRANTY – US & CANADA

WARRANTY – US & CANADA
JAM warrants this product free from defect in material and workmanship for a period of 1 year from the date of purchase. This warranty does not cover damage caused by misuse or abuse, accident, the attachment of any unauthorized accessory, alteration to the product, or any other conditions whatsoever that are beyond the control of JAM.

For detailed Warranty instructions and information, Visit:
www.jamaudio.com/customer-support/warranty-1yr.

To obtain warranty service on your JAM product, contact a Consumer Relations representative by the telephone number or email address for your country of residence. Please make sure to have the model number of the product available.

For service in the USA
Email: [email protected]
Tel: 1-888-802-0040
8:30am–7:00pm EST M–F

For service in Canada
Email: [email protected]
Tel: 1-888-225-7378
8:30am–5:00pm EST M–F

For service in Australia
Email: [email protected]
Tel: 03 87566500
8:30am–5:00pm AEST M–F
www.jam-audio.com.au

WARRANTY – UK & EUROPE
JAM warrants this product free from defect in material and workmanship for a period of 2 years from the date of purchase. This warranty does not cover damage caused by misuse or abuse, accident, the attachment of any unauthorised accessory, alteration to the product, or any other conditions whatsoever that are beyond the control of JAM. Distributed in the EU by FKA Brands Ltd, Somerhill Business Park, Tonbridge, TN11 0GP, UK. Tel: 020 3538 0768 Email: [email protected].

WARRANTY – AUSTRALIA
(1-YEAR LIMITED WARRANTY)
We or Us means HoMedics Australia Pty Ltd ACN 31 103 985 717 and our contact details are set out at the end of this warranty; You means the purchaser or the original end-user of the Goods. You may be a domestic user or a professional user; Supplier means the authorized distributor or retailer of the Goods that sold you the Goods in Australia and New Zealand; and Goods means the product or equipment which was accompanied by this warranty and purchased in Australia and New Zealand.

For Australia:
Our Goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled, subject to the provisions of the Australian Consumer Law, to a replacement
or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled, subject to the provisions of the Australian Consumer Law, to have the Goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This is not a complete statement of your legal rights as a consumer.

For New Zealand:
Our Goods come with guarantees that cannot be excluded under the Consumer Guarantees Act 1993. This guarantee applies in addition to the conditions and guarantees implied by that legislation.

The Warranty
HoMedics sells its products with the intent that they are free of defects in manufacture and workmanship under normal use and service. In the unlikely event that your HoMedics product proves to be faulty within 1 year from the date of purchase due to workmanship or materials only, we will replace it at our own expense, subject to the terms and conditions of this guarantee. The warranty period is limited to 3 months from the date of purchase for products used commercially/professionally. Terms and Conditions:

In addition to the rights and remedies that you have under the Australian Consumer Law, Consumer Guarantees Act of New Zealand or any other applicable law and without excluding such rights and remedies warranty against defects:

1. The Goods are designed to withstand the rigors of normal household use and are manufactured to the highest standards using the highest quality components. Whilst unlikely, if, during the first 12 months (3 months commercial use) from their date of purchase from the Supplier (Warranty Period), the Goods prove defective by reason of improper workmanship or materials and none of your statutory rights or remedies apply, we will replace the Goods, subject to the terms and conditions of this warranty
2. We do not have to replace the Goods under this Additional Warranty if the Goods have been damaged due to misuse or abuse, accident, the attachment of any unauthorised accessory, alteration to the product, improper installation, unauthorised repairs or modifications, improper use of electrical/power supply, loss of power, malfunction, or damage of an operating part from failure to provide manufacturer’s recommended maintenance, transportation damage, theft, neglect, vandalism, environmental conditions, or any other conditions whatsoever that are beyond the control of HoMedics.
3. This Warranty does not extend to the purchase of used, repaired, or secondhand products, or to products not imported or supplied by HoMedics Australia Pty Ltd, including but not limited to those sold on offshore internet auction sites.
4. This Warranty extends only to consumers and does not extend to Suppliers.
5. Even when we do not have to replace the Goods, we may decide to do so anyway. In some cases, we may decide to substitute the Goods with a similar alternative product of our choosing. All such decisions are at our absolute discretion.
6. All such replaced or substituted Goods continue to receive the benefit of this Additional Warranty for the time remaining on the original Warranty Period (or 3 months, whichever is the longest).
7. This Additional Warranty does not cover items damaged by normal wear and tear, including but not limited to chips, scratches, abrasions, discolouration, and other minor defects, where the damage has negligible effect on the operation or performance of the Goods.
8. This Additional Warranty is limited to replacement or substitution only. As far as the law permits, we will not be liable for any loss or damage caused to property or persons arising from any cause whatsoever, and shall have no liability for any incidental, consequential, or special damages.
9. This warranty is only valid and enforceable in Australia and New Zealand.

Making a Claim:
In order to claim under this Warranty, you must return the Goods to the Supplier (place of purchase) for replacement. If this is not possible, please contact our Consumer Relations department by email ( [email protected] ) or at the address below.

• All returned Goods must be accompanied by satisfactory proof of purchase that clearly indicates the name and address of the Supplier, the date and place of purchase, and identifies the product. It is best to provide an original, legible, and unmodified receipt or sales invoice.
• You must bear any expense for return of the Goods or otherwise associated with making your claim under this Additional Warranty.

Distributed in Australia by HOMEDICS AUSTRALIA PTY LTD, 14 Kingsley Close, Rowville, Victoria 3178. Distributed in New Zealand by Phoenix Distribution NZ Ltd, 7B Orbit Drive, Albany / North Shore 0757, Auckland, New Zealand.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING.

WARNING: Listen responsibly. To avoid hearing damage, make sure the volume on your device is turned down before connecting earphones. After placing earphones on your ears, gradually turn up the volume until you reach a comfortable listening volume.

• Use this product only for its intended purpose as described in this manual. Do not use attachments not recommended by Jam.
• Jam is not liable for any damage caused to smartphones, iPod/MP3 players, or any other devices.
• Do not place or store this product where it can fall or be dropped into a tub or sink.
• Do not place or drop into water or any other liquid.
• Not for use by children. THIS IS NOT A TOY.
• Never operate this product if it has a damaged cord, plug, cable, or housing.
• Keep away from heated surfaces.
• Only set on dry surfaces. Do not place on surface wet from water or cleaning solvents.

WARNING: This product has an internal, non-replaceable lithium battery. Please dispose in accordance with your local, state, province, and country guidelines. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.

BATTERY REPLACEMENT
Your headphones includes a rechargeable battery designed to last the lifetime of the product. In the unlikely event that you should require a replacement battery, please contact Consumer Relations, which will supply details of the warranty and out-of-warranty replacement battery service. This product contains small parts that may present a choking hazard for young children.

CAUTION: All servicing of this product must be performed by authorized Jam Audio service personnel only. For complete user guide and to register your product, visit www.jamaudio.com
(USA), canada.jamaudio.com (Canada), or uk.jamaudio.com/instructionbooks (UK).

To prevent possible hearing damage, do not listen at high volume for long periods.

WEEE EXPLANATION
This marking indicates that this product should not be disposed with other household wastes throughout the EU.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

BATTERY DIRECTIVE
This symbol indicates that batteries must not be disposed of in the domestic waste as they contain substances that

can be damaging to the environment and health. Please dispose of batteries in designated collection points.

Hereby, FKA Brands Ltd declares that this radio device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the Declaration of Conformity can be obtained from uk.jamaudio.com/DoC.

© 2018 HMDX. All rights reserved. JAM is a registered trademark of HMDX. HMDX is a registered trademark of FKA Distributing Co. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HMDX is under license.

Operating frequency band: 2402 – 2480MHz
HX-EP900/HX-EP910: Maximum radio-frequency power transmitted: 6.00dBm

Distributed by HMDX.
3000 N Pontiac Trail
Commerce Township, MI 48390

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>