iffhome WF320745 4 Seaters Patio Set Coffee Table Chairs Installation Guide
- August 16, 2024
- IFFHOME
Table of Contents
iffhome WF320745 4 Seaters Patio Set Coffee Table Chairs
Product Specifications:
- Model Numbers: WF320745, WF320746, WF320747
- Materials : Metal, Glass, Fabric
- Number of Pieces: Various (refer to part list)
- Hardware Included: Bolts, Allen Key
PARTS
Part List
Hardware
CARTON CONTENT
Product Usage Instructions
Assembly:
- Ensure all parts are available as per the part list.
- Start by connecting Leg Table (B) & Top Table (A) using Bolts (1) and tighten with Allen Key (5).
- Continue assembling following the steps outlined in the manual.
Stability Guidelines:
- Before fixing all screws, tighten 50% initially. Use an Allen wrench instead of an electric tool.
- Place the item on a flat surface to adjust and ensure stability.
- Tighten all screws gradually with tools.
- If screws are not aligned during assembly, loosen all screws and continue.
- If the item is unstable, loosen all screws, adjust on a flat surface, and tighten again.
Notice :
- 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill. all screws again.
- Place the item on a flat ground to adjust and make sure it remains stable.
- Tighten up all screws with tools gradually.
- If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process
- If the item is not stable, please loosen all the screws, adjust it on a flat ground and tighten up not be aligned with holes. In addition, all the holes are designed to be relatively larger WF320745;WF320746;WF320747
- Note : If one or some screws are fully tightened during assembly, chances are the others will to provide more space for the adjustment of the screws.
FAQ
Q: What should I do if some screws are fully tightened during assembly?
A: If some screws are fully tightened, others may not align with the holes.
Loosen all screws and adjust as needed.
Q: Can I use an electric tool to tighten the screws?
A: It is recommended to use an Allen wrench instead of an electric tool to
avoid over-tightening.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>