SAFAVIEH LIT4062A Portable Lamp Instruction Manual

June 13, 2024
SAFAVIEH

SAFAVIEH-LOGO

SAFAVIEH LIT4062A Portable Lamp

Product Information

This portable lamp is equipped with a polarized plug, featuring one blade that is wider than the other. This design serves as a safety feature to reduce the risk of electric shock. The plug is intended to fit into a polarized outlet in only one orientation. If the plug does not fully fit into the outlet, it should be reversed. If it still does not fit, it is important to contact a qualified electrician. It is advised to never use an extension cord unless the plug can be fully inserted. Attempting to defeat this safety feature is strongly discouraged.

For care and maintenance, it is recommended to unplug the lamp before using any cleaning solutions. The lamp shades should be dusted with a feather duster or an appropriate vacuum brush attachment. The lamp bases can be cleaned using methods suitable for the specific material. It is important to avoid the use of chemicals and household cleaners, as they may cause damage to the lamp’s finish.

The product consists of several components, including a Lamp base (A), Neck (B), Saddle (C), Socket (D), Harp (E), Shade (F), Finial (G), and Bulb (H). The lamp’s model number is LIT4062A, and its dimensions are 16 inches in length, 16 inches in width, and 29 inches in height.

Before starting the assembly process, ensure that all parts are present by comparing them with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. The estimated assembly time is approximately 6 minutes. In case of any difficulties, our friendly Customer Care team is available for assistance via email at customersupport@safavieh.com.

Note: Please use an on/off type A bulb with a maximum wattage of 100 watts or an LED bulb with a maximum wattage of 12 watts. There is an LED 9-watt bulb included in the package.

Product Usage Instructions

Step 1:
Pull the power cord to connect the Neck (B) to the Base (A). Carefully screw the Neck (B) onto the Lamp base (A), ensuring that the power cord is not twisted. Tighten the connection securely.

Step 2:
Insert the Harp (E) into the Saddle (C).

Step 3:
Place the Shade (F) onto the Harp (E). Tighten the Finial (G) into the Harp (E) to secure the Shade (F).

Step 4:
Ensure that the lamp is placed on a level surface to check if everything is stable.

Step 5:
Insert the Bulb (H) into the Socket (D).

Your lamp is now ready for use. Enjoy!

Model# LIT4062A
Product Dimensions: 16″Lx 16″Wx 29″H

WARNING

This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit,contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuumbrush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material.
Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

  • Please make sure that you have all parts indicated before you begin assembly of this item
  • This item should be assembled on a soft surface to prevent scratching the finish during assembly
  • To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
  • The external flexible cable or cord of this luminaire cannot be replaced
  • If the cord is damaged, the luminaire shall be destroyed

Part List and Hardware List

PIECE| DESCRIPTION| PICTURE| QUANTITY| PIECE| DESCRIPTION| PICTURE| QUANTITY
---|---|---|---|---|---|---|---


A

| ****

Lamp base

| |

1X

| ****

E

| ****

Harp

| |

1X


B

| ****

Neck

| |

1X

| ****

F

| ****

Shade

| |

1X


C

| ****

Saddle

| |

1X

| ****

G

| ****

Finial

| |

1X


D

| ****

Socket

| |

1X

| ****

H

| ****

Bulb

| |

1X

PREPARATION

  • Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
  • If any part is missing or damaged, do not attempt to assemble the product.
  • Estimated Assembly Time: 6 minutes.
  • If you are having difficulty, our friendly Customer Care team is always here to help. Please email customersupport@safavieh.com

NOTE: PLEASE USE ON/OFE TYPE”A” BULB MAX 100-WATT OR LED BULB MAX 12-WATT. THERE IS LED 9-WATT BULB IN THE BOX

| |
---|---|---
Step 1: Pull power cord to connect the Neck (B) to the Base (A). Screw the Neck (B) onto the Lamp base (A). Be careful not to twist the power cord and tighten securely| Step2: Insert the Harp (E) into the Saddle (C). Put the shad e(F) on the Harp (E), then tighten the Finial (G) into the Harp (E), Insert the bulb (H) into the socket (D).| Step3: Put the light on a level surface to check if everything is stable.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals