DiFluid DFT-S101 Microbalance Ti Coffee Scale Instruction Manual
- June 1, 2024
- DiFluid
Table of Contents
Microbalance
Quick Start Guide
Foreword
Thank you for purchasing DFluid Microbalance, a professional, smart, digital
coffee scale.
This product is designed specifically for brewing coffee, with a series of
functions including weighing, timing, calculating, recording, and networking,
for use with pour-over coffee, espresso, and other scenarios.
This product can be used both stand-alone and with DiFluid Café, our companion
app.
For a more fluid introduction to coffee brewing education andrecipe creation,
please connect to DiFluid Café and join our community!
| |
---|---|---
https://www.digitizefluid.com/software-redirect?N=001 &P=001
|
https://www.digitizefluid.com/software-redirect?N=001 &P=002
|
https://www.digitizefluid.com/software- redirect?N=001&P=003
Product Breakdown
| Power On | Single tap | Power / Tare |
|---|
Tare
PowerOff| Hod
Change Units| Double tap
Start/Stop Tme| Single tap| D-Link
Access system information| Double tap
Know Your Microbalance
| Product Name | Microbalance |
|---|---|
| Model | DFT-S101 |
| Measurements (LWH) | 135mm 135mm 26.5mm |
| Max | 2000g |
| Min | 0.2g |
| Precision | 0.1g |
| Resolution | 0g-1000g:0.1g |
1000g-2000g:1g
Units| g/oz/gr
Operating Temperature| 5°C-40°C
Charging Port| USB-C
Charging Specs| 5V ****0.5A
Battery Capacity| 1000 mAh
What’s Included| Microbalance x1
Heat-Insulating Silicon Mat x1
Charging Cable x1
Microbalance Display and Sound
-
The left display area shows the timer in second. Timing display area will only be display when active.
-
The middle display area shows the flow rate in gram/second.
-
The right display area can show weight in grams(g), ounces(oz) or grains(gr); Indicator light on the right will show current units.
— Gram Resolution: 0.1g: 0-1000g, 1g: 1000-2000g
— Ounce Resolution: 0.001oz
— Grain Resolution: 1gr -
To turn off the beep, please do so in the companion app, DiFluid Café.
Icon Description
Equipment startup| The display “———-” indicates that the scale is starting up
and should not be touched during this time
---|---
Out Of Range Alert| Flow rate display area and weight display area illuminated
Connected To DiFluid Café| Display brightness will be reduced untl there is a
weight change or a button triggered.
Lost Connection To DiFluid Café| Flow rate and weight area shows “– —-“
Beep Sound On| Icon displays
Beep Sound Off| Icon not displayed
Auto-Detect Timing On| Icon displays
Auto-Detect Timing Off| Icon not displayed
Battery Normal| Icon displays
Low Battery Warning| Icon not displayed
Charging| Icon not displayed
Battery Fully Charged| Icon flash quckly
Working condition| Icon flashes slowly
Standby status| Icon displays
Using Microbalance
Manual Timing
- Tap (D-Link) to start timing.
- Tap (D-Link) again to stop timing.The display freezes and flashes the final result, press any key to return to the working state.
Timed auto-start function on
- Turn on the function using the DiFluid Café App and the Auto-Timer icon will light up.
- When water filling starts (slow change in flow rate), the appliance automatically starts the timer and beeps (a tick), while the icon flashes.
Timer auto-stop function on
- When the machine is in a timed state and a weight is removed, the timer is suspended and the weight remains stable until the weight is removed. There are two situations in the pause state.
— In case I, where the timing is paused, the timing continues to start after the weight has been put back (the pause is automatically compensated for).
— In the second case, when the timing is suspended, the timing is stopped manually, the display area flashes, keeping the suspended time and the stable weight before the weight is removed, this is the end of the timing, click any button to exit the timing mode.
Note:
- Do not move Microbalance mid-use to avoid incorrect weight measurement.
Product Warranty Card
One year warranty
Thank you for purchasing our product. Please contact us with any questions!
Scan here to check quality
assurance regulations.
https://www.digitizefluid.com/support/after-sales
User Information
User Name|
---|---
User Address|
Phone Number|
Product Information
Product Name|
---|---
Serial Number|
Sales Date|
Sales Unit Information
Name Of Sales Unit|
---|---
Sales Unit Address|
FCC Statements
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to this
equipment. Such modifications or changes could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference ina residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements, and can be used in portable exposure conditions without restriction.
CE Statements
EU regulatory conformance:
RF exposure information: The EIRP power of the device at maximal case is below
the exempt condition, 20mW specified in EN62479: 2010. RF exposure assessment
has been performed to prove that this unit will not generate the harmful EM
emission above the reference level as specified in EC Council
Recommendation(1999/519/EC).
CE DOC:
Hereby, Shenzhen Digitizing Fluid Technology Co., Ltd. declares that the radio
equipment type DFT-S101 is in compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following
internet address:
www.digitizefluid.com/support/document
Manufacturer information:
Company name: Shenzhen Digitizing Fluid Technology Co., Ltd.
Address: 1602 Jinhua Bld., Longhua District, Shenzhen, China.
Operation temperature: 0~40°C
Operation frequency (Max power)
Bluetooth: 2402-2480 (9dBm)
Certification Instructions
eVatmaster Consulting GmbH
Bettinastr. 30
60325 Frankfurt am Main,Germany
contact@evatmaster.com
EVATOST CONSULTING LTD
Suite 11, First Floor, Moy Road Business
Centre, Taffs Well, Cardiff, Wales, CF15 7QR
contact@evatmaster.com
FCC ID: 2A26IDFT-S101
204-B00827
CMIIT ID : 2022DP19253
Shenzhen Digitizing Fluid Technology Co., Ltd.
: Room 1602, Jinhua Building, Longhua District, Shenzhen, China.
: (+86) 0755-23761557
: www.digitizefluid.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>