DiFluid DFT-R102 R2 Extract Coffee TDS Refractometer User Guide
- June 10, 2024
- DiFluid
Table of Contents
DFT-R102 R2 Extract Coffee TDS Refractometer
User Guide
Overview
Back
Extract/Know Your R2 Extract
| Product Name | DiFluid R2 Extract |
|---|---|
| Model | DFT-R102 |
| Dimensions | 88mm 36mm 16mm |
| Range | 0-30%TDS |
| Precision | -±0.02%TDS |
| Accu racy/16n | ±0.03% TDS |
| Resolution | 0.01% IDS |
| 1.33299-1.38660 |
Refractive Index Range
20
Refractive Index Precision| ± 0.00004
Refractive Index Resolution| 0.00002
Time| 4s
Operating Temperature| 5°C-40°C
Battery| 430 mAh
Charging Port| Type-C
Charging Specs| 5 V— 0.3 A
Li-ion Battery Removability| Ti3JMII/Non-removableits L.
Water Resistance| i P67
App Connection
‘Search and download the Difluid Café app
Cleaning
Use clean water to inse the glass at the bottom of sample dish
Product Warranty Card
https://www.digitizefluid.com/support/after-sales
Calibration
Testing
Compliance Information FCC Compliance Notice
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE:
The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications or changes to this equipment. Such modifications
or changes could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirements, and can be used in portable exposure conditions without restriction.
Compliance Information CE Compliance Notice
EU regulatory conformance:
RF exposure information: The EIRP power of the device at maximal case is below
the exempt condition, 20mW specified in EN62479: 2010. RF exposure assessment
has been performed to prove that this unit will not generate the harmful EM
emission above the reference level as specified in EC Council Recommendation
(1999/519/EC).
CE DOC:
Hereby, Shenzhen Digitizing Fluid Technology Co., Ltd. declares that the radio
equipment type DFT-S101 is in compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following
internet address: www.digitizefluid.com/support/document.
Manufacturer information:
Company name: Shenzhen Digitizing Fluid Technology Co., Ltd.
Address : Room 1602, Jinhua Building, Longhua District, Shenzhen, China.
Operation temperature: 5°C-40°C Operation frequency(Max power) Bluetooth:
2402-2480 (9dBm)