ASUS ET12 AXE11000 Tri Band WiFi Router User Guide
- June 6, 2024
- Asus
Table of Contents
ASUS ET12 AXE11000 Tri Band WiFi Router User Guide
Hardware Explanations
- Plug the adapter into the DCIN port, and press the power switch.
- The power LED will light up when your hardware is ready.
Button and Port Explanations
Specifications:
Before Setup
Preparing to set up an AiMesh WiFi system
- Find two Zen WiFi Pro ET12, and power both on.
- Use a network cable to connect your optical modem to the WAN port of either Zen WiFi Pro ET12. This Zen WiFi Pro ET12 will be the AiMesh router, and the other Zen WiFi Pro ET12 will be the AiMesh node.
- The LED turns solid blue to indicate that Zen WiFi Pro ET12 is ready for setup.
ASUS ROUTER APP
Download free ASUS Router APP to set up and manage your router(s).
https://play.google.com/store/apps/details?id=com.asus.aihome&hl=en
http://itunes.apple.com/app /asus-router/id1033794044
AiMesh Setup Steps
- Prepare
Place your AiMesh router and node within 3 meters of each other during the setup process.
-
AiMesh node
Keep your AiMesh node powered on and standby for AiMesh system settings. -
Enabling Bluetooth
Enable Bluetooth on your phone. -
Launching ASUS Router APP
Launch ASUS Router APP, and then follow the on-screen instructions to finish the AiMesh setup.
Troubleshooting
If your AiMesh router cannot find any AiMesh node nearby or synchronization fails, please check the following and try again.
- a Move your AiMesh node closer to the AiMesh router ideally. Ensure that it is within 3 meters.
- b Your AiMesh node is powered on.
Relocation
THE BEST PERFORMANCE
Locate the AiMesh router and node at the best place.
NOTES: To minimize interference, keep the routers away from devices like cordless phones, Bluetooth devices and microwave ovens. We recommend that you place the routers in an open or spacious location.
Zen WiFi Pro ET12 LED indications
FAQ FREQUENTLY ASKED QUESTIONS
Q1: Does the AiMesh router support Access Point mode?
A: Yes. You can choose to set the AiMesh router as router mode or access
point mode. Please go to web GUI (http://router.asus.com), and go to the
page Administration > Operation Mode.
Q2: Could I setup wired connection between AiMesh routers (Ethernet
backhaul)?
A: Yes. AiMesh system supports both wireless and wired connection
between AiMesh router and node to maximize throughput and stability. AiMesh
analyses the wireless signal strength for each frequency band available, and
then determines automatically whether a wireless or wired connection is best
to serve as the inter-router connection backbone.
- Follow the setup steps to establish a connection between the AiMesh router and node via WiFi first.
- Place the node in the ideal locations for best coverage. Run an Ethernet cable from the LAN port of the AiMesh router to the WAN port of AiMesh node.
- AiMesh system will auto-select the best path for data transmission, whether wired or wireless.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions
for you to be able to responsibly recycle our products, batteries, other
components, as well as the packaging materials. Please go to
http://csr.asus.com/english/Takeback.htm for the detailed recycling
information in different regions.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and
Restriction of Chemicals) regulatory framework, we published the chemical
substances in our products at ASUS REACH website at
http://csr.asus.com/english/REACH.htm
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
IMPORTANT NOTE:
Radiation Exposure Statement: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. End users must
follow the specific operating instructions for satisfying RF exposure
compliance. To maintain compliance with FCC exposure compliance requirement,
please follow operation instruction as documented in this manual.
WARNING! This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Compliance Statement of Innovation, Science and Economic Development Canada
(ISED)
This device complies with Innovation, Science and Economic Development Canada
licence exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device. Operation in the band 51505250 MHz is only for
indoor use to reduce the potential for harmful interference to co-channel
mobile satellite systems. CAN ICES-003(B)/NMB-003(B)
Radio Frequency (RF) Exposure Information
The radiated output power of the ASUS Wireless Device is below the Innovation,
Science and Economic Development Canada radio frequency exposure limits. The
ASUS Wireless Device should be used in such a manner such that the potential
for human contact during normal operation is minimized.
This equipment should be installed and operated with a minimum distance of 20
cm between the radiator any part of your body.
This device has been certified for use in Canada. Status of the listing in the
Innovation, Science and Economic Development Canada’s REL (Radio Equipment
List) can be found at the following web address: http://www.ic.gc.ca/eic/site
/ceb-bhst.nsf/eng/h_tt00020.html Additional Canadian information on RF
exposure also can be found at the following web:
https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
Precautions for the use of the device
- a. Pay particular attention to the personal safety when use this device in airports, hospitals, gas stations and professional garages.
- b. Medical device interference: Maintain a minimum distance of at least 15 cm (6 inches) between implanted medical devices and ASUS products in order to reduce the risk of interference.
- c. Kindly use ASUS products in good reception conditions in order to minimize the radiation’s level.
- d. Keep the device away from pregnant women and the lower abdomen of the teenager.
Networks Global Hotline Information
NOTES:
- UK support e-mail: network_support_uk@asus.com
- For more information, visit the ASUS support site at:
https://www.asus.com/support
UKCA statement
Simplified UKCA Declaration of Conformity
ASUS Tek Computer Inc. hereby declares that this device is in compliance with
the essential requirements and other relevant provisions of The Radio
Equipment Regulations 2017 (S.I. 2017/1206). Full text of UKCA declaration of
conformity is available at https://www.asus.com/support/.
The frequency, channel and the maximum transmitted power in UK are listed
below: 2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40),
802.11ac(VHT20), 802.11ac (VHT40),
802.11ax(HE20),802.11ax(HE40) 5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40),
802.11ac (VHT20), 802.11ac(VHT40), 802.11ac
(VHT80),802.11ac(VHT160), 802.11ax(HEW20), 802.11ax(HEW40), 802.11ax(HEW80),
802.11ax(HEW160) 6GHz: 802.11ax(HEW20), 802.11ax(HEW40), 802.11ax(HEW80),
802.11ax(HEW160) The frequency, channel and the maximum transmitted power in
EU are listed below: 2400-2483.5MHz (1-13): OFDM: 19.9dBm(97.7mW); CCK:
17.9dBm(61.7mW) 5150-5250MHz (36-48): 22.9dBm(195mW)
5250-5350MHz (52-64): 22.9dBm(195mW)
5470-5725MHz (100-140): 29.9dBm(977mW)
5945-6425MHz : 22.9dBm(195mW)
The device is restricted to indoor use only when operating in the 5150 to 5350
MHz and 5945 to 6425 MHz frequency range. The adapter shall be installed near
the equipment and shall be easily accessible. The WiFi operating in the band
5150-5350 MHz and 5945-6425 MHz shall be restricted to indoor use for the
country listed below:
Authorized representative in United Kingdom:
ASUSTEK (UK) LIMITED
Address: 1st Floor, Sackville House, 143-149 Fenchurch Street, London,
EC3M 6BL, England, United Kingdom
Tel: +44-01442-202-700
Fax: +44-01442-245-882
Support mail:
network_support_uk@asus.com
http://uk.asus.com
CE statement
Simplified EU Declaration of Conformity
ASUS Tek Computer Inc. hereby declares that this device is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU. Full text of EU declaration of conformity is available at
https://www.asus.com/Networking-IoT-Servers/Whole-Home-Mesh-WiFi-System
/ZenWiFi-WiFi-Systems/ASUSZenWiFi-Pro-ET12/HelpDesk_Manual/.
Declaration of Conformity for Ecodesign directive 2009/125/EC
Testing for eco-design requirements according to (EC) No 1275/2008 and (EU) No
801/2013 has been conducted. When the device is in Networked Standby Mode, its
I/O and network interface are in sleep mode and may not work properly. To wake
up the device, press the WiFi on/off, LED on/off, reset, or WPS button. This
equipment complies with EU radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20 cm between the radiator & your body. All operational
modes: 2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40),
802.11ac(VHT20), 802.11ac (VHT40), 802.11ax(HE20), 802.11ax(HE40) 5GHz:
802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac(VHT40),
802.11ac (VHT80), 802.11ac(VHT160), 802.11ax(HEW20), 802.11ax(HEW40),
802.11ax(HEW80), 802.11ax(HEW160) 6GHz: 802.11ax(HEW20), 802.11ax(HEW40),
802.11ax(HEW80), 802.11ax(HEW160) The frequency, channel and the maximum
transmitted power in EU are listed below: 2400-2483.5MHz (1-13): OFDM:
19.9dBm(97.7mW); CCK: 17.9dBm(61.7mW) 5150-5250MHz (36-48): 22.9dBm(195mW)
5250-5350MHz (52-64): 22.9dBm(195mW) 5470-5725MHz (100-140): 29.9dBm(977mW)
5945-6425MHz : 22.9dBm(195mW)? The adapter shall be installed near the
equipment and shall be easily accessible.
The WiFi operating in the band 5150-5350MHz and 5945-6425 shall be restricted
to indoor use for countries listed in the table below:
Safety Notices
- Use this product in environments with ambient temperatures between 0°C(32°F) and 40°C(104°F).
- Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
- DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
- DO NOT place or drop objects on top and do not shove any foreign objects into the product.
- DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
- DO NOT cover the vents on the product to prevent the system from getting overheated.
- DO NOT use damaged power cords, accessories, or other peripherals.
- If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
- To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
References
- ASUS Global
- ZenWiFi WiFi Systems|Whole Home Mesh WiFi System|ASUS Global
- Global Take Back Service | Resource Regeneration | Circular Economy | ASUS ESG website, ASUS ESG goal
- ASUS Global
- ASUS Global
- ASUS Global
- ASUS Global
- ASUS Global
- ASUS Global
- ZenWiFi WiFi Systems|Whole Home Mesh WiFi System|ASUS Global
- Official Support | ASUS Global
- Official Support | ASUS Global
- Radio equipment list (REL)
- ASUS Global
- ASUS Global
- ASUS Global
- ASUS Global
- ASUS Global
- ASUS Global
- ZenWiFi WiFi Systems|Whole Home Mesh WiFi System|ASUS Global
- Official Support | ASUS Global
- Official Support | ASUS Global
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>