LYKYL Quiet Professional Hair Clippers User Manual

: June 3, 2024
: LYKYL

Table of Contents

LYKYL

LYKYL

LYKYL Quiet Professional Hair Clippers

Specifications

RECOMMENDED USES FOR PRODUCT: Professional
COLOR: Yellow
ITEM WEIGHT: 1 Grams
BRAND: LYKYL
MATERIAL: Metal
BLADE MATERIAL: Titanium
POWER SUPPLY MODE: charge and plug dual purpose
RATED VOLTAGE: 110- 240V
RATED POWER: 3W-15W
RATED FREQUENCY: 50HZ
CHARGING TIME: 3-5 hours
CHARGER: universal voltage
BATTERY CAPACITY: 1000mA

Introduction

It is Specially designed for pets; the titanium blade has 35 serrations and is perfect for all types of pet hairdressing. All angles of the pet can have their hair styled while accommodating varying hair lengths. It has Obtuse angle protection design, no risk of skin abrasion, and noise cancellation to lessen cutter head friction noise. Fast speed, consistent performance, strong power, user-friendly, and long-lasting copper core motor. A Perfect Father’s Day and Christmas Gift for Men, Husbands, Dads, and Boyfriends.

HOW HAIR CLIPPERS WORK

When one blade of the clipper swings sideways in relation to the other, it creates a scissor action that cuts the hair that is positioned between the comb’s teeth. Lowest possible friction between the blades must be achieved, which is done by selecting the right material and finish as well as applying lubricant frequently.

HOW TO CLEAN

It’s simple and painless to clean your clippers. After each use, simply brush off any hair that is still on the blades before spraying them with a multipurpose disinfectant, advises Cardoso.

HOW TO MAINTAIN CLIPPER ATTACHMENTS

Don’t use any attachments that you haven’t removed. Remove as much hair and dirt from your clippers as you can with a cleaning brush. To remove any remaining hair and avoid cross-contamination, use an antibacterial clipper spray. Before wiping clean, let the spray sit for the amount of time specified on the can.

HOW TO STORE

Keep all clipping supplies inside, away from the elements, such as in a tack room, a truck locker, or a storage space. By doing this, you may prevent the interior of the clippers from becoming wet and chilly, which could lead to expensive complications.

HOW TO TEST CLIPPER BLADES

TIP Try to move the top cutter of the clipper from side to side while holding the blade in your palm. If you discover that the top cutter is not moving far enough, you should loosen the tension a little. To accomplish this, insert a flat-head screwdriver into the spring’s side and slowly release the tension.

Frequently Asked Questions

How durable are cordless clippers?****

Most cordless clippers typically have a battery life of 40 to 60 minutes. Your best battery-operated hair clippers should last 90 minutes or so.

Can clippers be used while charging?****

Trimmers and clippers that are waterproof can be safely used and cleaned with water. However, if these gadgets are put into an electrical outlet, they will not function. They are constructed in this way to avoid any accidents.

Can cordless shears be operated while charging?****

First, only charge your clipper when it is necessary to do so. The ideal scenario is to completely discharge your clipper’s battery before recharging. If your clipper has a cordless or corded option, you can plug it in and use it as needed, but note it will not gain charge while in use.

Why won’t my hair clippers cut?****

Apply two drops of clipper oil to the blades and test cut again as soon as your blades begin to pull hair. (Oil lubricates the blades so they can cut effectively and run at the proper pace. The clipper runs cooler as a result.

What does the term “zero gap” in hair clippers mean?****

to less Zero gap refers to the adjustment of the two blade tips for more rapid and precise edging (lining). Additionally, it results in a lesser variance in the length of the fade or blend guide lines. Since there is less margin for error while utilizing zero gapped clippers, care should be given.

How frequently should my clippers be oiled?****

By lubricating them, you may reduce friction that can dull the blade, avoid overheating, and keep your clippers sharper for longer. While oiling your clipper blades is not required after each usage, you should establish a pattern of doing so every two uses.

How long does it take a Clipper to charge?****

It is recommended to charge the device for three to five hours before using it for the first time. Connect the unit’s power wire immediately. Make sure the clipper is turned off before charging. The charge indicator is illuminated while charging.

How long should my trimmer be charged?****

Normal charge times for most groomers range from one to eight hours. We advise letting your device charge for at least 3 hours while doing so for the first time. For details on your model’s unique charging instructions, consult your user manual.

How can you tell whether a magic clip has been charged?****

When the battery is fully charged, the blue light disappears.

How durable are clipper blades?****

Manufacturers of clippers typically advise professional groomers to alter their blade drive every 1-3 months, depending on use.

Can skin be sliced by clippers?****

The factory-set Wahl clipper and trimmer blades shouldn’t cut the skin, though, under typical use. However, keep in mind that dropping or striking the blades can cause them to become misaligned and lead to skin nicks.

What sort of clipper oil do you use?****

According to a Quora hair clipper expert, any light carrier oil would do the trick. Make sure it can tolerate high temperatures because the friction created by the blades generates heat. They advise utilizing a generic brand of olive oil (extra virgin oil is not required).

How come clippers heat up?****

The main cause of clipper blades heating up quickly is a lack of lubrication. The speed of clippers has improved with time in order to give a better finish while also removing the coat more quickly. However, as groomers are discovering, the clipper’s blades heat up more quickly the faster it operates.

Can electric hair clippers be sharpened?****

Yes, you can use sandpaper to sharpen your clipper blades. Start by unscrewing the blades, brushing them, and washing them with a blade wash, much like when using a whetstone. Holding the clipper blades, swipe them across the sandpaper that is spread out on a flat surface.