LYKYL Professional Hair Clipper User Guide

: June 3, 2024
: LYKYL

Table of Contents

LYKYL

LYKYL

LYKYL Professional Hair Clipper

LYKYL Professional Hair Clipper Electric Clipper

Specifications

RECOMMENDED USES FOR PRODUCT: Trimming, Professional
ITEM WEIGHT: 16 Grams
BRAND: LYKYL
MATERIAL: Metal
BLADE MATERIAL: Carbon, Stainless, Steel
BLADE MATERIAL: all steel blade
RATED VOLTAGE: 110-240V
PRODUCT COLOR: black
RATED POWER: 50HZ-60HZ
CHARGING METHOD: charge and plug dual purpose
BODY POWER: 3w
CHARGING TIME: 5 hours
USE TIME: 40 minutes

Introduction

Even in difficult-to-reach spots, an ergonomic design makes it easy to use. It has 9 cutting rails with a length of 1.5–15 mm, detachable, IPX5 splash-proof housing, precision ground stainless steel cutting head. It is quicker and more practical to wash the entire blade with water to remove any remaining hair. Self-service haircut with anti-slip design that is more practical, more intuitive, and has a battery indication. power supply with worldwide voltage regulation, up to 40 minutes of working duration, and roughly 90 minutes (110-240V).

HOW ELECTRIC HAIR CLIPPERS WORK

While operating similarly to manual hair clippers, electric versions use an electric motor to cause the blades to oscillate. In several nations, they have gradually replaced manual hair clippers. The production of clippers uses three different motor types: magnetic, rotary, and pivot.

HOW TO MAINTAIN CLIPPER ADJUSTMENTS

Don’t use any attachments that you haven’t removed. Remove as much hair and dirt from your clippers as you can with a cleaning brush. To remove any remaining hair and avoid cross-contamination, use an antibacterial clipper spray. Before wiping clean, let the spray sit for the amount of time specified on the can.

HOW TO MAINTAIN ELECTRIC CLIPPERS

BRUSH all stray hairs from the blades of the clipper while it is turned off. Cut hairs that gather in between the blades have the same effect as sand or gravel and will quickly dull your blades. 2. COOL While the clipper is running, lightly mist the blades with Andis Cool Care Plus to clean and disinfect them.

HOW TO CLEAN CLIPPER HEAD

Make sure the grooming device is off. Use your cleaning brush to remove any hair or skin buildup after removing the tool’s head. If the head cannot be removed, you can brush the blade region. Rinse the head under the faucet to remove any extra skin, hair, or oil.

HOW TO SHARPEN ELECTRIC CLIPPER BLADES

Hair clippers can be sharpened by taking out the blade and running it along a 4000 grit coarse honing stone, which you can purchase at a hardware or home improvement store. Once the stone is shiny and even, advance the blade across it ten times while angling it. Repeat on the other edge after flipping the blade over.

Frequently Asked Questions

Can you cut damp hair with a clipper?****

Don’t even try to trim dripping wet hair with clippers; it’s practically impossible. A good towel dry makes it much simpler for you to achieve the desired style and helps keep the clipper blades from rusting.

What distinguishes the Clippers’ open and closed guards?****

The blade is in its lowest cutting position when the taper lever is closed, which results in more hair being chopped. The blade is at its longest cutting position while the taper lever is open, cutting the least amount of hair. The majority of common clipper blades are configured 000 to 1 without a zero gap.

What distinguishes an open guard from a closed guard?****

An open guard clipper evenly trims your beard while keeping it longer to give you a tidy appearance. On the other hand, a closed guard clipper gives you a more neatly trimmed beard.

Why won’t my hair clippers cut?****

Apply two drops of clipper oil to the blades and test cut again as soon as your blades begin to pull hair. (Oil keeps the blades lubricated, enables them to operate at the proper speed, ensures better cutting, and keeps the clipper running cooler.)

What does the term “zero gap” in hair clippers mean?****

to less Zero gap refers to the adjustment of the two blade tips for more rapid and precise edging (lining). Additionally, it results in a lesser variance in the length of the fade or blend guide lines. Since there is less margin for error while utilizing zero gapped clippers, care should be given.

Can hair clippers be used without a guard?****

Yes, trimming hair to a specific length is done with hair clippers. Most guys trim their necklines without the guard in order to achieve a tighter cut.

What is the length of the longest clipper?****

Among all clipper lengths, the number 8 haircut typically has the greatest haircut number.

How much time do clipper guards last?****

The guards are available in the following sizes: 1/16″, 1/8″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, left ear taper, right ear taper, eyebrow, and ear trim guides. This is what? They typically range in size from 1/8″ to 1″.

Which guard makes the smallest haircuts?****

The length of the haircut you’ll get with each clipper guard size is summarized here. The shortest cut is provided by number 1 guards (1/8′′), while the longest cut is provided by number 8 guards (1′′).

How durable are clipper blades?****

Depending on usage, clipper manufacturers often advise professional groomers to replace their blade drive every 1-3 months.

What sort of clipper oil do you use?****

According to a Quora hair clipper expert, any light carrier oil would do the trick. Make sure it can tolerate high temperatures because the friction created by the blades generates heat. They advise utilizing a generic brand of olive oil.

Are clippers harmful to hair?****

“Scissors allow the hair to grow back better and more smoothly than clippers, which gives your hair a better texture. Clippers can harm the hair and make it look spiky. Simply put, the hair sits better. Additionally, getting a haircut is a peaceful experience because scissors are plainly quieter than clippers.

How come clippers heat up?****

The main cause of clipper blades heating up quickly is a lack of lubrication.

How are clipper blades tested?****

TIP Try to move the top cutter of the clipper from side to side while holding the blade in your palm. If you discover that the top cutter is not moving far enough, you should loosen the tension a little. To accomplish this, insert a flat-head screwdriver into the spring’s side and slowly release the tension.

How frequently should my clippers be oiled?****

By lubricating them, you may reduce friction that can dull the blade, avoid overheating, and keep your clippers sharper for longer. While oiling your clipper blades is not required after each usage, you should establish a pattern of doing so every two uses.