LYKYL

LYKYL Rechargeable Electric Clipper

Specifications

• RECOMMENDED USES FOR PRODUCT: Salon, Trimming
• ITEM WEIGHT: 1 Grams
• BRAND: LYKYL
• MATERIAL: Metal
• BLADE MATERIAL: Stainless Steel
• TARGET AUDIENCE: Men
• NAME: Hair clipper
• BLADE MATERIAL: precision stainless steel cutting head
• VOLTAGE: 110-240V
• APPLICABLE OBJECTS: individuals, salon hairdressers
• TYPE: bald hair clipper/precision hair clipper
• CHARGING TIME: 5 hours
• USE TIME: 180 minutes
• MATERIAL: ABS
• SIZE: 4*15cm
• WEIGHT: 50G

Introduction

It is Corner head with a R shape, safe and quick trimming, and no card. It offers smart haircut and ergonomic design; Baby-safe noise levels with low decibels. It is Simple to carry, convenient charging whenever you want, classic size design. Smooth body lines and excellent holding comfort. simple to maintain and clean.

HOW CLIPPER ATTACHMENTS WORK

Barber clippers can be fitted with plastic guards called “clipper guards” that prevent the blades from being cut any shorter than a predetermined length. For instance, if a plastic clipper guard is rated at 1/2 inch, it should, in theory, only cut hairs longer than that length and leave hairs shorter than it uncut.

HOW TO REMOVE CLIPPER GUARDS

Most clipper guards are rather simple to remove. Pull the guard off by pulling down on the tab. It is significantly simpler to clean as a result. Before removing the protection, make sure the clipper is turned off and unplugged to prevent accidently starting it.

HOW TO TROUBLESHOOT

Make sure the power is on at the electrical outlet, check the battery and recharge it if necessary, or inspect the electrical cord if a hair clipper is completely unresponsive. Turn the appliance over while unplugged, then manually move the blades. Test the switches and motor as necessary.

HOW TO KEEP CLIPPERS SHARP

• If you were using a comb attachment, remove it first before removing the blade from your clippers.
• To remove fur from between the teeth, use a toothbrush, paintbrush, or something similar. You can also use an old, soft towel without loops.
• Reinstall the blade on your clipper.
• Apply oil, then continue to trim!

HOW TO TEST CLIPPER BLADES

TIP Try to move the top cutter of the clipper from side to side while holding the blade in your palm. If you discover that the top cutter is not moving far enough, you should loosen the tension a little. To accomplish this, insert a flat-head screwdriver into the spring’s side and slowly release the tension.

Frequently Asked Questions

Why won’t my hair clippers cut?****

Apply two drops of clipper oil to the blades and test cut again as soon as your blades begin to pull hair. (Oil lubricates the blades so they can cut effectively and run at the proper pace. The clipper runs cooler as a result.

Can wet hair be cut using electric clippers?****

Don’t even try to trim dripping wet hair with clippers; it’s practically impossible. A good towel dry makes it much simpler for you to achieve the desired style and helps keep the clipper blades from rusting.

What is the hair clippers’ longest setting?****

Among all clipper lengths, the number 8 haircut typically has the greatest haircut number. You can utilize the inch-long hair it leaves behind to fade the sides with a smaller hair clipper while using it to trim the top.

What do the numerals on Clippers represent?****

Depending on the brand, guards range from 0 to 8 (and occasionally up to 10). Since many of the lower guard numbers are utilized in fades, the shorter the guard number, the shorter the hair will be. If you request a fade, you’ll get bonus points for knowing which guard number you want to fade from and into.

How much time do clipper guards last?****

The guards are available in the following sizes: 1/16″, 1/8″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, left ear taper, right ear taper, eyebrow, and ear trim guides. This is what? They typically range in size from 1/8″ to 1″.

How frequently must clipper blades be changed?****

Depending on usage, clipper manufacturers often advise professional groomers to replace their blade drive every 1-3 months.

Why do my clippers tangle so easily?****

If the blade is not latching into position, you should investigate why. There can be something stuck under the blade, or it might not be latching properly between the hinge and driving finger.

Are clippers harmful to hair?****

“Scissors allow the hair to grow back better and more smoothly than clippers, which gives your hair a better texture. Clippers can harm the hair and make it look spiky. Simply put, the hair sits better. Additionally, getting a haircut is a peaceful experience because scissors are plainly quieter than clippers.

Can electric hair clippers be sharpened?****

Yes, you can use sandpaper to sharpen your clipper blades. Start by unscrewing the blades, brushing them, and washing them with a blade wash, much like when using a whetstone. Holding the clipper blades, swipe them across the sandpaper that is spread out on a flat surface.

What sort of clipper oil do you use?****

According to a Quora hair clipper expert, any light carrier oil would do the trick. Make sure it can tolerate high temperatures because the friction created by the blades generates heat. They advise utilizing a generic brand of olive oil.

How simple are hair clippers to use?****

Fortunately, using hair clippers to cut hair isn’t particularly challenging. You’ll need to become familiar with the fundamentals of cutting, such as clipper guard numbers. Then, begin trimming in accordance with the haircut you desire.

Can hair clippers be used without a guard?****

Yes, trimming hair to a specific length is done with hair clippers. Most guys trim their necklines without the guard in order to achieve a tighter cut.

Can clippers be used on the top of the head?****

After finishing the sides and back of your head, clip on the #4 attachment guard to your clippers and proceed to the top of your head, where the hair will be a little longer. This time, start at the top of your head at your front bangs and cut over to the back.

Which produces more haircuts, open or closed?****

The blade is in its lowest cutting position when the taper lever is closed, which results in more hair being chopped. The blade is at its longest cutting position while the taper lever is open, cutting the least amount of hair. The majority of common clipper blades are configured 000 to 1 without a zero gap.

What are the variations in clipper blade sizes?****

To show how much hair each blade will leave behind, they are numbered. For instance, a #10 blade will leave 1/16′′ of hair behind. The cut will be shorter the higher the blade number. So it should be clear that a #15 blade will deliver a shorter cut than a #5, and vice versa.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>