LYKYL Multifunctional Hair Clipper Instruction Guide
- June 3, 2024
- LYKYL
Table of Contents
LYKYL
LYKYL Multifunctional Hair Clipper
Specifications
- ITEM WEIGHT: 1 Grams
- BRAND: LYKYL
- MATERIAL: Metal
- CHARGING TIME: 3 hours
- USE TIME: 200 minutes
- PRODUCT SIZE: 1 47 45CM
- ITEM WEIGHT: 035 ounces
Introduction
Ceramic blade made of titanium alloy, resistant to wear, easy to use, low heat, and low noise design. It has Flexible hair cutting comb that can handle cutting hair of various lengths. Use a high stiffness hairpin with a length- reducing control wheel that is suited for infants, kids, and adults. Haircutting is quick, easy, and secure. In combination with four different comb attachments, you can more easily manage hair length and accommodate hair of varied lengths. It has Rechargeable battery, wired, and wireless usage power modes. It can operate for roughly 200 minutes after a 3-hour charge.
HOW TO MAINTAIN CLIPPER ATTACHMENTS
Don’t use any attachments that you haven’t removed. Remove as much hair and dirt from your clippers as you can with a cleaning brush. To remove any remaining hair and avoid cross-contamination, use an antibacterial clipper spray. Before wiping clean, let the spray sit for the amount of time specified on the can.
HOW TO CLEAN TRIMMER AFTER USE
Using spray cleaner is preferable than getting your clippers or trimmers wet when cleaning them, according to DeAngelis. Brush the blades clean like you would with an electric razor, give them a quick spray of cleaner, let them air dry, and then add a drop of oil.
HOW TO ADJUST CLIPPER LENGTH
Not all clippers include a taper lever, but those that do will have something like this: You can adjust the tightness of your cut between guide comb lengths with the taper lever. For a shorter cut, pull the lever up; for a longer cut, pull it down.
HOW TO STORE CLIPPERS
While you can store your clipper with a blade still attached, it may be advisable to remove the blades and wrap them in an oiled towel to avoid rusting. Spraying your blades with the Andis 5-in-1 cooling spray before storing them will provide them extra protection because it has rust- preventative qualities.
HOW TO CLEAN CLIPPER GUARDS
The plastic add-ons that come with the clippers are called clipper guards. Use a tiny brush or a toothbrush to first remove any hair from the guards. To clean the guards, wash them in warm, soapy water. You can scrape the guards clean with the toothbrush if there is any remaining dirt on them.
Frequently Asked Questions
Do you trim your hair whether it’s dry or wet?****
Don’t even try to trim dripping wet hair with clippers; it’s practically impossible. A good towel dry makes it much simpler for you to achieve the desired style and helps keep the clipper blades from rusting.
What does Clippers’ closed position entail?****
The smallest length possible, typically approximately a #000 length with most clipper blades, is cut when the taper lever is fully up (closed position; blades are closest to one another); this length is bald but not skin bald.
What distinguishes an open guard from a closed guard?****
An open guard clipper evenly trims your beard while keeping it longer to give you a tidy appearance. On the other hand, a closed guard clipper gives you a more neatly trimmed beard.
Can you cut pubic hair using clippers?****
Even if they weren’t made expressly for it, normal hair clippers will work. Use an attachment that is the appropriate length (for instance, 14″). Run it over your hair in the opposite direction of how it grows after turning it on.
How many different kinds of hair clippers exist?****
The production of clippers uses three different motor types: magnetic, rotary, and pivot. Direct current or alternating current electricity sources can power rotary styles. The magnetic forces that are produced by winding copper wire around steel are used in both magnetic and pivot style clippers.
What can I use to clean the blades on my clippers?****
Use everything you like, including soap, blade cleaner, and simple water. Use a stiff brush to remove any or all of the aforementioned particles from the cutting surfaces (an old toothbrush works best). After cleaning both cutting services, slide the comb to the other side and repeat the process.
How frequently should my clippers be oiled?****
By lubricating them, you may reduce friction that can dull the blade, avoid overheating, and keep your clippers sharper for longer. While oiling your clipper blades is not required after each usage, you should establish a pattern of doing so every two uses.
Can we use water to wash the trimmer?****
Only waterproof Philips groomers and trimmers can be rinsed. Look at the signs and symbols printed on your groomer’s box or handle to confirm this.
The lifespan of a trimmer’s blades****
It is advised to change your blade drive every three to four months, or more frequently, for a professional groomer who grooms four to five dogs every day.
What is a guard’s role on the Clippers?****
Barber clippers can be fitted with plastic guards called “clipper guards” that prevent the blades from being cut any shorter than a predetermined length. For instance, if a plastic clipper guard is rated at 1/2 inch, it should, in theory, only cut hairs longer than that length and leave hairs shorter than it uncut.
What is a guard’s role on the Clippers?****
Barber clippers can be fitted with plastic guards called “clipper guards” that prevent the blades from being cut any shorter than a predetermined length. For instance, if a plastic clipper guard is rated at 1/2 inch, it should, in theory, only cut hairs longer than that length and leave hairs shorter than it uncut.
Which is longer, open or closed Clippers?****
We must highlight one more thing: Clippers can be ordered both closed and open. The open position of the lever results in a longer, softer cut, while the closed position results in a close cut.
How can hair clippers that won’t cut be fixed?****
Apply two drops of clipper oil to the blades and test cut again as soon as your blades begin to pull hair. (Oil lubricates the blades so they can cut effectively and run at the proper pace. The clipper runs cooler as a result.
What does the guard role entail?****
When grappling on the ground, the guard is a position when one opponent has their back to the other and tries to control them.