LYKYL Professional Hair Trimmer Hair Instruction Manual

: June 3, 2024
: LYKYL

Table of Contents

LYKYL

LYKYL

LYKYL Professional Hair Trimmer Hair

Specifications

RECOMMENDED USES FOR PRODUCT: Beard, Trimming, Professional
ITEM WEIGHT: 1 Grams
BRAND: LYKYL
MATERIAL: synthetic-fiber
BLADE MATERIAL: Ceramic, Titanium
TARGET AUDIENCE: Men
ITEM TYPE: Hair Clipper
VOLTAGE: 110 – 240V
INPUT VOLTAGE (V): DC 5V
CHARGING TIME: 3 hours
WORKING TIME: 200 minutes
ITEM WEIGHT: 035 ounces

Introduction

Two dual guide combs (3mm and 6mm / 9mm and 12mm) and a 4-in-2 length-fixing comb make it simple to trim and create different lengths of hair. With its precise blade and changeable cutting length of 1.0 to 1.9mm, you may select between short, straight hair that is neatly clipped. It has titanium cutting head with ceramic. It is made to perform in a way that won’t rust or tangle your hair, assure excellent durability, and clip always smoothly. LCD screen, On the body, an LCD screen with an easy speed and time display allows you to trim your hair. The adjustable clipping comb can be used to cut hair of various lengths.

HOW BEARD TRIMMER WORKS

The moveable blade oscillates quickly thanks to a DC motor. The moving and fixed blades cross over and squeeze the hair from the skin to complete the trimming. The blades are sufficiently sharp to stop the skin from being bruised by pulling on the hair follicles.

HOW TO MAINTAIN CLIPPER ATTACHMENTS

Don’t use any attachments that you haven’t removed. Remove as much hair and dirt from your clippers as you can with a cleaning brush. To remove any remaining hair and avoid cross-contamination, use an antibacterial clipper spray. Before wiping clean, let the spray sit for the amount of time specified on the can.

HOW TO CLEAN CLIPPERS AFTER USE

Put a small amount of the clipper blade wash in a small dish.
Try to get rid of as much dirt and extra hair from the clipper blades as you can.
While the blades are still attached to the clippers, place them in the dish.
After 20–30 seconds of turning on the clippers, there is no longer any debris or hair coming off the blades.

HOW TO CLEAN CLIPPER HEAD

Make sure the grooming device is off. Use your cleaning brush to remove any hair or skin buildup after removing the tool’s head. If the head cannot be removed, you can brush the blade region. Rinse the head under the faucet to remove any extra skin, hair, or oil.

Frequently Asked Questions

Should you trim your beard on dry or damp hair?****

Before trimming your beard, always make sure it is dry and combed. This will make it simpler to see precisely where the hair is and keep it all pointing in the same direction.

What should I use after trimming?****

You must apply an after-shave moisturizer after shaving. It aids in controlling the itch and soothing your skin. With the use of a good aftershave moisturizer or balm, your skin should remain soft and less irritated.

Why pull hair when using my beard trimmer?****

(Oil lubricates the blades, enables them to run at the proper speed, ensures better cutting, and keeps the clipper from overheating; if the blades are still tugging the hair, you will notice this.)

How durable are clipper blades?****

Depending on usage, clipper manufacturers often advise professional groomers to replace their blade drive every 1-3 months.

How do the sizes of hair clippers work?****

Since many of the lower guard numbers are utilized in fades, the shorter the guard number, the shorter the hair will be. If you request a fade, you’ll get bonus points for knowing which guard number you want to fade from and into.

Can a trimmer be used without a guard?****

You’ll get beard stubble as a result. After going over any trouble spots with your beard trimmer, you can tidy them up with a straight razor. Use the trimmer without a protection to keep your mouth and the bottom of your moustache clean.

Can you cut hair with a beard trimmer?****

You can use a dog clipper or a beard trimmer (clean, of course). Just be aware that you will have a very short cut if you only have clippers and no protectors. While a beard trimmer will work, it will take longer.

Is using a trimmer on the face safe?****

Because the trimmer head is neither a shaver or razor blade, it won’t harm or lacerate your skin if you touch it to it.

Does a trimmer benefit skin?****

Trimmers don’t harm the skin in any way. It might be the things we described earlier or cuts and wounds. Naturally, a lot of this also depends on the trimmer blade’s performance and application.

Does hair growth increase when using a trimmer?****

No, shaving doesn’t alter the thickness, color, or growth pattern of hair. When body or facial hair is shaved, the hair’s tip becomes blunt.

Why have clippers ceased to cut?****

The friction wears down the blade and generates heat, which makes your clipper work harder and eventually stops the blade from cutting. You should lubricate your blades at least after each use to prevent this. Additionally, this will reduce the possibility of the blade corroding, which can happen fairly quickly.

What sort of clipper oil do you use?****

According to a Quora hair clipper expert, any light carrier oil would do the trick. Make sure it can tolerate high temperatures because the friction created by the blades generates heat.

My clippers are quite loud, why?****

My mains-powered clipper makes a loud noise when I try to clip. This indicates that either the power screw on the right side of the clipper needs to be adjusted or the blades need to be oiled.

What is the length of the longest clipper?****

Among all clipper lengths, the number 8 haircut typically has the greatest haircut number. You can utilize the inch-long hair it leaves behind to fade the sides with a smaller hair clipper while using it to trim the top.

How much time do clipper guards last?****

The guards are available in the following sizes: 1/16″, 1/8″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, left ear taper, right ear taper, eyebrow, and ear trim guides. Most often, they’ll take measurements between 1/8” and 1”.