Satel MP-1 Relay Module Instructions
- June 5, 2024
- Satel
Table of Contents
Satel MP-1 Relay Module
MP-1 Relay module
The MP-1 relay module is used to control devices with high current consumption by means of low-current OC type outputs. The relays ensure galvanic isolation of control and power signals. The module can work with various devices equipped with OC-type outputs, e.g. control panels, communication modules, automation devices, etc.
Features
- 4 control inputs.
- 4 relay outputs.
- 5 power outputs protected with time-delay fuses.
Electronics board
Description of terminals
IN +12 V -: +12 VDC power input.
COM: – common ground.
-R1+…-R4+ – relay control inputs. Connect common ground to “-” terminal and + 12 VDC voltage to “+” terminal.
OUT +12 V – +12 VDC power outputs are protected with time-delay fuses.
NC1…NC4 – relay output normally closed contact.
NO1…NO4 – relay output normally open contact.
C1…C4 relay output common contact.
Specifications
- Supply voltage ……………………………………………………………………………………… 12 VDC ± 15%
- Fuse F1…F5 ………………………………………………………………………………………………… T 400 mA
- Relay output 1…2 (resistive load) DC …………… 2 A / 30 VDC
- AC …………. 1 A / 125 VAC
- Relay output 3…4 (resistive load) DC …………… 8 A / 30 VDC
- AC …………. 8 A / 230 VAC
- Environmental class according to EN 50130-5 ……………………………………………………………… II
- Operating temperature range ……………………………………………………………………. -10°C…+55°C
- Maximum humidity ……………………………………………………………………………………………. 93±3%
- Dimensions …………………………………………………………………………………………….. 140 x 68 mm
- Weight ………………………………………………………………………………………………………………. 106 g
The declaration of conformity may be consulted atwww.satel.eu/ce
SATEL sp. z o.o.
ul. Budowlanych 66
80-298 Gdańsk
POLAND tel. +48 58 320 94 00
www.satel.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>