satel ROP-401-EU Addressable Call Point User Manual
- June 1, 2024
- Satel
Table of Contents
satel ROP-401-EU Addressable Call Point
Product Information
- Model: ROP-401/EU
- Power Supply Voltage: 18-26 V DC
- Dimensions Without Holders: 87 x 87 x 53 mm
- Dimensions With Holders: 117 x 87 x 53 mm
Product Usage Instructions
Installation
- Ensure the power supply voltage is within the specified range (18-26 V DC).
- Mount the manual call point in the desired location using holders if needed.
- Connect the system according to the provided wiring diagram.
Operation
- To activate the fire alarm system, press the manual call point button.
- When the alarm is triggered, follow the evacuation procedures as per your fire safety plan.
Maintenance
- Regularly test the manual call point to ensure it is functioning correctly.
- Check for any physical damage or signs of wear and tear.
- Keep the area around the call point clear for easy access in case of an emergency.
FAQ
-
Q: What should I do if the alarm goes off accidentally?
A: If the alarm is triggered accidentally, you can reset it by following the reset procedure outlined in the user manual. -
Q: Can the manual call point be used in outdoor environments?
A: It is recommended to use the manual call point indoors to prevent exposure to harsh weather conditions which may affect its performance.
Introduction
The ROP–400 call point for outdoor applications is used to manually trigger an alarm when a fire is discovered. It is designed to operate in the detection line of the ACSP–402; addressable fire alarm control panel.
- resettable plastic pane
- ROP–KEY–U key (sold in set) to enable:
- testing
- resetting
- LED indicator/li>
- double–sided short–circuit isolator
- power supply from the detection line
- mounting box included
- optional protective cover to prevent unintentional activation – ROP–FLAP
Specification
- Operating temperature range -25°C…+70°C
- Weight 180 g
- Maximum humidity 95%
- The current draw when detecting 170 μA
- Current draw when emitting an alarm 450 μA
- IP rating IP66
- Power supply voltage 18…26 V DC
- Dimensions without holders 87 x 87 x 53 mm
- Dimensions with holders 117 x 87 x 53 mm
The actual appearance of the products may differ from the presented images. Product descriptions are provided in the web service for information purposes only.