GOOLOO GP Warrior Portable Car Jump Starter User Manual
- June 5, 2024
- GOOLOO
Table of Contents
Jump Starter User Manual
Model : GP Warrior
Thanks for choosing GOOLOO jump starter.
Please read this manual carefully before using it and keep it for review.
Accessories
- 1 x Main Unit(Jump Starter)
- 1 x Kit Bag
- 1 x Smart Jumper Cable
|
- 1 x Micro USB Cable
- 1 x User Manual
---|---
Product Information
Function Introduction
- Indicator
Press the Power button to check the remaining battery of GOOLOO GP Warrior.
Indicator Unit 1solid 2 solid 3solid 4 solid Indicator| Unit| 1solid| 2 solid| 3solid| 4 solid
---|---|---|---|---|---
Remaining power| 0%| 25%| 50%| 75%| 100%
The indicator will flash one by one when charging. Different numbers of solid indicators show different battery storage levels of GOOLOO starter. All indicators light are off when charging is paused or completed.
-
Recharge the unit
1). Plug the USB charging cable into any working USB output port.
2). Connect the Micro connector to the GP Warrior host.
-
How To Jump Start Your Vehicle
GOOLOO GP Warrior is designed for jump-starting 12V vehicle batteries.
Step 1: Fully plug the blue connector of the clamp cable into the jump starter socket, and make sure the Indicator on the clamp cable is off.
Step 2: Connect Red Clamp to the positive(+) battery terminal and the Black Clamp to the negative(-) battery terminal.
Step 3: Operate according to the Indicator on the clamp cable:
GREEN LIGHT on Telling the connection is correct and the circuit is working, you can turn on the engine to jump-start directly.
RED LIGHT on with buzzing: Telling the connection is wrong, and buzzing to alarm to correct the clamps as step 2 mentioned above, wait until the GREEN LIGHT is on to turn on the engine.
GREENLIGHT blinking with buzzing: Telling the vehicle battery is low, press the “BOOST” button, wait till GREEN LIGHT becomes solid, then turn on the engine within the 30s.
No Lights on, No buzzing: Telling the vehicle’s battery may be damaged, after confirming that the connection of the clamps is correct, press the “BOOST” button, wait till GREEN LIGHT is on, and then turn on the engine within the 30s.
Step 4: Start the vehicle.
Step 5: When the vehicle is started, remove the clamp cable from the jump starter first, then remove the clamps from your vehicle battery.
CAUTION:
• Occasionally, the jump starter will lock itself down for safety, due to(a) short-circuit; (b) over-current; (c) over-temperature; (d) over/ low- voltage;(e) reverse-connection. Once it happens, turn off the jump starter and remove the battery clamps from your car battery, restart the jump starter & connect the clamps back on the battery, try it again.
• If the vehicle does not start within 3 seconds, stop starting and wait at least 30 seconds before attempting to restart the vehicle.
Don’t jump-start the vehicle continuously more than four times as it may damage the unit. Check your vehicle for other possible reasons for not starting.
•During jump-starting, avoid the positive and negative battery clamps touching each other. Otherwise, the electric spark will appear, resulting in a safety hazard and damage to the unit by a short circuit.
• This unit contains a lithium polymer battery. It is only used as an emergency power but not to take place of a car battery. Always comply with transport and safety regulations in the use and disposal of such batteries. -
Charge your phone or tablet
Step 1: Plug the switch cable into a USB output port.
Step 2: Select the appropriate connector and connect it to your mobile phone or tablet.
Step 3: Press the switch button to charge.
Step 4: It doesn’t work, please try another USB cable or USB Output port.
-
Use the LED flash light
Long press the Power button for 3 seconds to start the LED flash light.
Short press the Power button, and there are 3 modes of LED light appear torchlight, strobe, or SOS switchable.
FAQ
Q. How to turn off this appliance?
A. This appliance will shut-off automatically when no load or charging is
completed.
Q. How to jump-start a vehicle with GOOLOO jumpstarter?
A.1). Make sure it is over 60% charged. I have not used it for more than
two months, please charge it first.
2). Turn on it and connect the red clamp to “+”, the black clamp to”-“,
the end of the car battery.
3). Start the car, unplug the jumper cables from the jump starter within
30 seconds, and remove the clamps from your car battery.
Q.What should I do if the GOOLOO jump starter cannot be charged?
A. Charge it with a different charging cable to recharge it for the test.
If it still does not work, email us via
contact@gooloo.com(Within 12 months warranty
period, and please attach your order ID, it is necessary for our confirmation)
Q.What should I do if the GOOLOO jump starter cannot charge other
devices?
A. Using a different charging cable to charge again, if it can work, it
must be the defective charging cable, email us and we will provide you with a
new cable. If it still does not work, email us via
contact@gooloo.com(Within 12 months warranty
period, and please attach your order ID, it is necessary for our confirmation)
Q. How long does the battery last in sleeping mode?
A. 6-12 months, however, we suggest recharging it every 3 months.
TROUBLESHOOTING
Finding | Cause | Remedies |
---|---|---|
No response when pressing the power button. | Low voltage protection of GOOLOO | |
starter is started. | Plug the adaptor into the 5V/2A input port to activate. |
Attention
Warning
- Read the instruction manual carefully before using this unit.
- The product needs to be fixed in place when you keep it in the trunk.
- Do not place the product in any high-intensity magnetic field in order to avoid any damage to its components.
- Before the first use, please charge the jump starter for at least 3 hours.
- Please keep the remaining power above 20%.
- Keep children away from this unit.
- Do not use this unit if any cable clamp or cord is damaged.
- Never Use or remain the unit on the car battery after cranking the car.
- Make sure the blue plug of the jumper cable is fully plugged into a jumping socket, otherwise, the blue plug would be melted.
- Make sure and check the battery connections and the battery clamps are well connected before jumping started! If the battery terminals on the vehicle are dirty or corroded, the power of the unit will be lessened.
- Remove the product from the vehicle battery within 30 seconds of Jump Starting. If not, it could lead to damage.
- Do not operate the product in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Remove personal metal items like rings, bracelets, necklaces, etc, when using the products.
- Do not use the unit to jump-start a vehicle while charging the internal battery.
- If this unit is leaking liquid, dispose of it at a proper recycling facility immediately. If a liquid is noticed coming from the product, do not handle it with bare hands. If the jump starter is inflating, please stop using it.
- Do not toss it into the trash or your regular recycling bin after use.
- Please recycle it according to your local environmental rules.
SPECIFICATION
Battery Capacity: | 20800mAh/76.96Wh |
---|---|
Starting Current: | 500A(3s) |
Peak Current: | 2000A |
Output: | 5V 1A;5V 2.4A |
Input: | 5V 2A |
Full Charging Time: | 5-6 hours |
Discharge Temp: | -20℃~40℃ |
Charge Temp: | 0℃~45℃ |
Main unit N.W.(g): | 580g |
Size: | 2088928.5mm(LWH) |
Warranty & Customer Service
Customer Services
One-year warranty from the date of purchase. If you have any
questions/problems about using the product, please feel free to contact us,
our customer service team is always at your service:
contact@gooloo.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>